06-22-2009, 07:39 PM
|
#2 (permalink)
|
|
A True Z Fanatic
Join Date: Apr 2009
Location: Illinois
Posts: 1,449
Drives: 09-6MT-T/S/N
Rep Power: 20
|
Quote:
Originally Posted by Minicobra1
Installed my Stoptech rear slotted/drilled rear rotors yesterday. there is an intermittent scrapping/rubbing sound coming from the left side. I can especially hear it when driving with the window down and close to the center island or in an alley.
Is it because the pads need to wear to the new rotor, I have 8300 miles on the old ones, or is it possible the rotor is warped or bent?? the right side does it slightly but not nearly as bad. When I installed the fronts I never had this issue, there was only about 3000 miles on the car though. Any thoughts, suggestions appreciated 
|
Yes, it usually takes a while for the pads to seat to the new rotors. The noise you hear is excess grooves in your pads being worn off by the new rotors , as they aren't fully seated. No need for worries.
__________________
"In a time of universal deceit, telling the truth is a revolutionary act."
Stillen G3 CAI || 35% tints || FI CBE coming soon...
|
|
|