Making Nismo ducts

Rusty

I have the Nismo brake ducts. They list $612.00 each. (got mine cheaper) So if someone could make them at a lower price. That would be great!

The end where the cooling hose goes on the Nismo brake duct is 4" diameter. The Stillen brake duct kit hose is 2" in diameter. So I have to come up with a reducer. That's where I'm at now. I got the reducer, but I need to do a little machining on it to fit the way I want it to.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Isamu

lol Rusty. now you know what I was talking about.. lol

__________________

黒子 ('Kuroko')
Project: SuperNova Owner/Operator and Lead designer @BlackGuard Aeroworks

Rusty

Oh, I KNOW what you was talking about. LOL Fell like I was getting it here went I bought them, without a reach-around.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Isamu

well, we can help you out if we can get these made

__________________

黒子 ('Kuroko')
Project: SuperNova Owner/Operator and Lead designer @BlackGuard Aeroworks

djtodd

Yeah, what I was thinking was to go from the 4" opening to 2x3" outlets. 3" duct is rather easily acquired, and you could close one off if you didnt care to route 2 ducts to the rotor. Personally, I would rather have more airflow than less.

I made a rough mockup earlier today, but I'm just going to have to break down and cut the holes to get the angle just right.

Also, how to the oem ducts mount? I was thinking of a plate on the inside of the bumper. That way, I could make some studs into the duct that would go through the bumper and plate, secured by lock-nut or similar.

Isamu

if you guys want, after I get the ducts produced I will do some R&D and make a viable cooling system...

tho I will be ducting to my coolers and my brakes

__________________

黒子 ('Kuroko')
Project: SuperNova Owner/Operator and Lead designer @BlackGuard Aeroworks

Rusty

The way they mount is a bolt with a washer or pop-rivet in each corner. That's it. Nothing behind the bumper but a washer and nut. You have to be careful. These things are thin!

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html