Swift springs and spacers

wheee! · 03-15-2011, 01:06 PM

NISMO's look better with the 15's all around, sport package looks best with 15 and 20 IMHO

bigdog1250 · 03-15-2011, 01:46 PM

Quote:

Originally Posted by wheee!

NISMO's look better with the 15's all around, sport package looks best with 15 and 20 IMHO

I'm either gonna go 20s all around or 20 and 25, I saw a sport package with 20/25 and it looked fuking hot!

wheee! · 03-15-2011, 01:56 PM

I'm gonna stick with the 15 and 20's because I will switch to 275 fronts and 305 rears when the stockers wear out....

bigdog1250 · 03-15-2011, 02:48 PM

Quote:

Originally Posted by wheee!

I'm gonna stick with the 15 and 20's because I will switch to 275 fronts and 305 rears when the stockers wear out....

That's a good point! I was thinking about beefing up my rubber also... hmmm.

oleg · 03-15-2011, 02:33 PM

How long does it usually take to get the swift springs in after your order?

Red__Zed · 03-15-2011, 02:40 PM

Quote:

Originally Posted by oleg

How long does it usually take to get the swift springs in after your order?

Depends on how bakordered they are. Right now, it's like end of march.

waynerzz · 03-18-2011, 07:08 PM

Do you guys have any suggestions for what spacers to run on the base 18" setup?

christian370z · 03-18-2011, 10:20 PM

I would recommend 20mm all around for base 18s, that will push the wheels out and make them even front and rear while removing making them nicely flush with the fenders.

waynerzz · 03-18-2011, 11:30 PM

Quote:

Originally Posted by christian370z

I would recommend 20mm all around for base 18s, that will push the wheels out and make them even front and rear while removing making them nicely flush with the fenders.

Thanks Christian!

zackstratford · 06-22-2011, 12:31 PM

Quote:

Originally Posted by christian370z

I would recommend 20mm all around for base 18s, that will push the wheels out and make them even front and rear while removing making them nicely flush with the fenders.

How low did you go with that set up.. looks suuuuper sexy

christian370z · 03-19-2011, 02:28 AM

No problem, always happy to help! Here are some shots of my newly installed sport package rims with 20mm spacers at all 4 corners. I also have a fair amount of negative camber, the fitment is PERFECT:

birdmanx1 · 03-19-2011, 08:42 AM

That looks awesome and real clean Christian

!!! SPC Rear Camber arms on ?

christian370z · 03-19-2011, 12:23 PM

Quote:

Originally Posted by birdmanx1

That looks awesome and real clean Christian

!!! SPC Rear Camber arms on ?

Nope, no camber arms whatsoever. I told the alignment shop to get it as close to factory spec as possible and the camber is somewhat aggressive (within factory spec) but that is what I am looking for as turn in and handling response is much better now.

RumbleFish · 11-12-2013, 02:36 PM

Quote:

Originally Posted by christian370z

Nope, no camber arms whatsoever. I told the alignment shop to get it as close to factory spec as possible and the camber is somewhat aggressive (within factory spec) but that is what I am looking for as turn in and handling response is much better now.

Hi, I know this is an old post, tried to send you a pm but, your box is full.

I saw you have a very similar set-up as to what I'll be running. I've got a 2010 w/ sport pkg.

I'm going with the 20mm H&R for all 4 corners & Swift spec-r springs…along w/ the FI CBE, GTM oil cooler, Stillen G3. and UpRev tune

All work is being @ SpecialtyZ here in soCal.

I see you're not using any camber kit at all. That's what I'm debating…Do I need the SPC combo kit or not?

This is my daily driver, probably not gonna track her but, maybe. I do some spirited driving in the twists though.

I'd love to get your thoughts and what your experience has been w/o the camber kits.

Thanks in advance.

NORAIN · 11-12-2013, 02:49 PM

Quote:

Originally Posted by RumbleFish

Hi, I know this is an old post, tried to send you a pm but, your box is full.

I saw you have a very similar set-up as to what I'll be running. I've got a 2010 w/ sport pkg.

I'm going with the 20mm H&R for all 4 corners & Swift spec-r springs…along w/ the FI CBE, GTM oil cooler, Stillen G3. and RevUp tune

All work is being @ SpecialtyZ here in soCal.

I see you're not using any camber kit at all. That's what I'm debating…Do I need the SPC combo kit or not?

This is my daily driver, probably not gonna track her but, maybe. I do some spirited driving in the twists though.

I'd love to get your thoughts and what your experience has been w/o the camber kits.

Thanks in advance.

I don't have a camber kit...almost stock specs after alignment. The camber looks pretty much stock too. I can't comment on tire wear. It's only been about 500 miles since the install & about 200 since alignment.
I kinda wish I would have done 20mm's in the front like you are.

03-15-2011, 01:06 PM	#1 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 59 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40183	NISMO's look better with the 15's all around, sport package looks best with 15 and 20 IMHO forzagt likes this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

03-15-2011, 01:56 PM	#3 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 59 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40183	I'm gonna stick with the 15 and 20's because I will switch to 275 fronts and 305 rears when the stockers wear out.... __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

03-18-2011, 10:20 PM	#8 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 433	I would recommend 20mm all around for base 18s, that will push the wheels out and make them even front and rear while removing making them nicely flush with the fenders. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

03-19-2011, 02:28 AM	#11 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 433	No problem, always happy to help! Here are some shots of my newly installed sport package rims with 20mm spacers at all 4 corners. I also have a fair amount of negative camber, the fitment is PERFECT: __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

03-19-2011, 08:42 AM	#12 (permalink)
birdmanx1 A True Z Fanatic Join Date: Jun 2010 Location: Baltimore, MD Age: 97 Posts: 3,175 Drives: 370z Nismo Rep Power: 25	That looks awesome and real clean Christian !!! SPC Rear Camber arms on ? __________________ 370Z NISMO #0462 \| ClearBra \| 3M tint \| Head/Taillights \| Dynamat \| Black Roof \| Tommy Kaira HB \| CF Parts \| Berk HFCs \| FI SS \| NST Pulleys \| Takeda aFe \| K&N \| H&R Spacers \| Swift Spec R \| SPC F&R \| Zuperman M370 Nismo Vid \| Nismo Journal \| Nismo Rumble

03-15-2011, 02:33 PM	#5 (permalink)
oleg Enthusiast Member Join Date: Dec 2010 Location: Illinois Posts: 321 Drives: 2011 370z 6mt sp Rep Power: 16	How long does it usually take to get the swift springs in after your order?

03-18-2011, 07:08 PM	#7 (permalink)
waynerzz Base Member Join Date: Feb 2010 Location: canada Posts: 21 Drives: c350 Rep Power: 17	Do you guys have any suggestions for what spacers to run on the base 18" setup?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift springs review!!!!!	CFZ	Brakes & Suspension	2166	09-10-2020 01:58 AM
H&R or Swift Springs?	ZPhycho	Brakes & Suspension	130	07-01-2013 06:25 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 06:58 PM
Swift Springs! Help PLZ.	370zjames	Brakes & Suspension	6	02-17-2011 12:21 PM
SWIFT Springs in Production	wishihadnav	Brakes & Suspension	200	02-01-2011 02:34 PM