Swift springs review!!!!!

Zoren 370 · 05-30-2012, 06:28 PM

Quote:

Originally Posted by wheee!

I do not track my car AND I have 305's in the rear with the above mentioned setup, therefore I chose -1.2 rear camber to keep the fat tires as square as possible and still have great handling. More negative camber will have some performance benefits for more aggressive drivers, but greater tire wear.
My fronts do not have camber arms so they are stock and -1.7 with the Swifts.

Do you have the Sport Rays wheels with your 305/30 V12?
Can I not go back to OEM camber setup with the swift and with a 19X11 wheels.
Is there a need for a camber kit for this?

KaienZ34 · 05-30-2012, 06:31 PM

Quote:

Originally Posted by Zoren 370

Do you have the Sport Rays wheels with your 305/30 V12?
Can I not go back to OEM camber setup with the swift and with a 19X11 wheels.
Is there a need for a camber kit for this?

It looks like stock rays and spacers.
It will depend on your offset.
More than likely you will need camber/toe kit for atleast the rear.

wheee! · 05-30-2012, 06:37 PM

Quote:

Originally Posted by Zoren 370

Do you have the Sport Rays wheels with your 305/30 V12?
Can I not go back to OEM camber setup with the swift and with a 19X11 wheels.
Is there a need for a camber kit for this?

Sport Rays and I have the SPC rear camber arms and toe kit.

Zoren 370 · 05-31-2012, 04:59 PM

Nice!
Anyway guys Im planning to put in a swift springs together with a 19X 9.5 and 19x11 M310 with V12 255/305. Now my question being the complete front and rear camber kits cost around 500+. Which kinda pain in my A** right now to buy.
Which one can I prioritize in buying the front or the rears to make my Z close to OEM's camber alignment? Since can't afford both right now.

KaienZ34 · 05-31-2012, 05:04 PM

Quote:

Originally Posted by Zoren 370

Nice!
Anyway guys Im planning to put in a swift springs together with a 19X 9.5 and 19x11 M310 with V12 255/305. Now my question being the complete front and rear camber kits cost around 500+. Which kinda pain in my A** right now to buy.
Which one can I prioritize in buying the front or the rears to make my Z close to OEM's camber alignment? Since can't afford both right now.

Do the rear first for sure.

KaienZ34 · 05-30-2012, 11:18 AM

What is an average cost for a spring and camber kit install run?

onzedge · 05-30-2012, 11:27 AM

Quote:

Originally Posted by KaienZ34

What is an average cost for a spring and camber kit install run?

You are looking at about $320 for the springs and about $190 for the camber arms. Install = ???

KaienZ34 · 05-30-2012, 11:31 AM

Quote:

Originally Posted by onzedge

You are looking at about $320 for the springs and about $190 for the camber arms. Install = ???

Thank you good sir, i already have the parts just looking for a ballpark price on installing them.

KingZee · 05-30-2012, 11:32 AM

Quote:

Originally Posted by KaienZ34

What is an average cost for a spring and camber kit install run?

if you were in L.A. instead of LA. Lou @ Amp would have hooked you up.

KaienZ34 · 05-30-2012, 11:33 AM

Quote:

Originally Posted by KingZee

if you were in L.A. instead of LA. Lou @ Amp would have hooked you up.

i know right

NXTAZEE · 05-30-2012, 03:44 PM

Ok, here are some photos. I wish I knew how to just post up the photos instead of these attachments.

Attachment 48034

Attachment 48029

Attachment 48030

Attachment 48032

Attachment 48031

Attachment 48033

Zoren 370 · 05-30-2012, 06:21 PM

Anybody here had a Swift spring installed with a FI or ARK Grip CBE.
Did you have any problems with ride height? I mean with speed bumps?

Zoren 370 · 05-30-2012, 06:23 PM

Quote:

Originally Posted by NXTAZEE

Ok, here are some photos. I wish I knew how to just post up the photos instead of these attachments.

Attachment 48034

Attachment 48029

Attachment 48030

Attachment 48032

Attachment 48031

Attachment 48033

Can't open your attachments.

KaienZ34 · 05-30-2012, 06:24 PM

I know Ron is running swifts and FI 3" catback on his TT nismo. We had no problems from texas to louisiana then the dragon (NC) and back. Just take speed bumps slowly and at an angle.

Zoren 370 · 05-30-2012, 06:32 PM

Quote:

Originally Posted by KaienZ34

I know Ron is running swifts and FI 3" catback on his TT nismo. We had no problems from texas to louisiana then the dragon (NC) and back. Just take speed bumps slowly and at an angle.

Thanks man, Oh you guys where at the ZdayZ? Too bad did not meet you in the dragon.

05-30-2012, 11:18 AM	#6 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	What is an average cost for a spring and camber kit install run? __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

05-30-2012, 03:44 PM	#11 (permalink)
NXTAZEE Track Member Join Date: May 2009 Location: Vancouver Island Posts: 530 Drives: 2010 370Z 7AT Rep Power: 17	Ok, here are some photos. I wish I knew how to just post up the photos instead of these attachments. Attachment 48034 Attachment 48029 Attachment 48030 Attachment 48032 Attachment 48031 Attachment 48033 __________________ 2010 Carbon Silver 370Z 7AT charcoal int. sports package \| Clear Bra \| Invidia Gemini CBE \| CF B-Pillars \| CF Fangs \| CF Z emblems \| Swift Springs \| 20mm & 25mm Spacers \| SPC Camber Arms \| Brushed Aluminum shift knob

05-30-2012, 06:24 PM	#14 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	I know Ron is running swifts and FI 3" catback on his TT nismo. We had no problems from texas to louisiana then the dragon (NC) and back. Just take speed bumps slowly and at an angle. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 07:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 04:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 10:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 10:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 06:58 PM

05-31-2012, 04:59 PM	#4 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	Nice! Anyway guys Im planning to put in a swift springs together with a 19X 9.5 and 19x11 M310 with V12 255/305. Now my question being the complete front and rear camber kits cost around 500+. Which kinda pain in my A** right now to buy. Which one can I prioritize in buying the front or the rears to make my Z close to OEM's camber alignment? Since can't afford both right now.

05-30-2012, 06:21 PM	#12 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	Anybody here had a Swift spring installed with a FI or ARK Grip CBE. Did you have any problems with ride height? I mean with speed bumps?