Swift springs review!!!!!

JtodaR_Z34 · 05-15-2013, 05:40 AM

This is a great thread. I was looking at buying some springs and looked at all other brands but was leaning more towards swifts and this just made it easier for me to decide. Swift springs it is!

onzedge · 05-15-2013, 06:18 AM

Quote:

Originally Posted by JtodaR_Z34

This is a great thread. I was looking at buying some springs and looked at all other brands but was leaning more towards swifts and this just made it easier for me to decide. Swift springs it is!

KaienZ34 · 05-15-2013, 07:05 AM

Stock spec camber in the rear with SPL camber arms.

jlbrenne · 05-16-2013, 10:25 AM

Will the Swifts fit on the 370z Roadsters will no probs????

DarkJak · 05-19-2013, 02:56 PM

I've been running on Swifts for quite a while now and have been loving it, but I'm wondering if anyone has gone from Swifts to a coilover setup?

KW V3's have always been my dream setup, but now that I'm considering gettin a set, I'm worried that I might not like the change from linear springs to their progressive springs. Has anyone ever regretted the change?

olddudesrule · 05-19-2013, 05:18 PM

The Swift's arrived from 3 Corner Garage muy pronto, and I did the install today with the help of a friend. Followed the DIY, and it was a breeze, though it did take about two hours to get the fronts in (an impact wrench is definitely your friend!). Rears couldn't be easier.

I started out stock with 1 7/8" in front, and 1 1/2" in the rear. After the install and a short shake down ride, I ended up with 1" in the front, and 3/4" in the rear. We'll give it about a week to settle and then I'll get an alignment done to check the specs.

Just from a feel stand point, the steering seems as neutral and centered as before (no major alignment issues). On city streets, the car seems to "settle" a bit faster than the stock Nismo springs, and the car feels a bit flatter in sharp corners. I haven't ran it hard yet, but will get a chance later in the week. I'll try and get a pic or two up in the next day or so.

Next up, install of the Z1 oil cooler, and then the long wait for the FI CBE.

mag_black · 05-19-2013, 06:09 PM

Installed Swifts today; dramatically reduced body roll; made taking corners a blast. I'm very happy w/ the performance aspect of it, but my front chin spoiler is not.

Those that are thinking about getting these, stop thinking and get them; you will be very happy.

faya · 05-19-2013, 09:47 PM

Quote:

Originally Posted by Ron

Still rocking swifts. About time you installed yours Francis!

Is that a vinyl on your roof?

Sent from my iPhone using Tapatalk- faya baby!

KaienZ34 · 05-20-2013, 06:39 AM

Quote:

Originally Posted by faya

Is that a vinyl on your roof?

Sent from my iPhone using Tapatalk- faya baby!

Yeah, he got it on this forum from Blue Bat.

/Angelo350Z/ · 05-20-2013, 07:34 AM

After two months, I've learned to ignore the occasional sounds

. The ride is definitely better. Though, I wish the springs gave a bit more drop. Still better than the Eibach Prokit springs I have on my 350Z.

The fenders have a cast a shadow on the tires creating the illusion of a bigger fender gap.

KaienZ34 · 05-20-2013, 08:27 AM

I got to check out my other Z'z at Zdayz and all the swift ones had the same (almost 2 fingers) gap between the rear tires and fender as mine do. Since my rear offset is +0 the wheels pokes out a lot and that's why it looks off.

jlbrenne · 05-20-2013, 08:33 AM

Would you guys still do the swifts again or pick something else????

KaienZ34 · 05-20-2013, 08:37 AM

I'd do it again and again, unless I needed more drop then KW V3's for me. Spring wise i'd go no other route.

jlbrenne · 05-20-2013, 03:30 PM

alright guys i just pulled the tripper on the swifts. i was reading on here a few days ago about some other type of gasket that i should buy for the install of the swifts..it cost like $25 or something...are these necessary..or i guess my real question is do i need anything other than the springs for the swift install????

mag_black · 05-20-2013, 06:34 PM

^ I installed springs and reused the jacket/sleeves on the front. I have no weird noises coming from anywhere.

05-15-2013, 07:05 AM	#1728 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	Stock spec camber in the rear with SPL camber arms. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

05-16-2013, 10:25 AM	#1729 (permalink)
jlbrenne Track Member Join Date: Jul 2012 Location: Atlanta GA Posts: 586 Drives: Roadster BLACK Rep Power: 14	Will the Swifts fit on the 370z Roadsters will no probs???? __________________ Black Rdstr:GTHAUS Meisterschaft FCB.Tint(20%+50% windshield).3"Carb Stub Ant.Z Lisc Plt & LED.Rr fog.VF Fend.Cust Handles.EVO Cust Rdstr Wing.Varrstoen 19" Whls.Stillen HFC&CAI.Swift Spring.VQ37 Cust Mani.Z1 UPREV.Amuse.310whp/254torq

05-19-2013, 02:56 PM	#1730 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16804	I've been running on Swifts for quite a while now and have been loving it, but I'm wondering if anyone has gone from Swifts to a coilover setup? KW V3's have always been my dream setup, but now that I'm considering gettin a set, I'm worried that I might not like the change from linear springs to their progressive springs. Has anyone ever regretted the change? __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

05-19-2013, 05:18 PM	#1731 (permalink)
olddudesrule Enthusiast Member Join Date: Apr 2013 Location: Gilbert, AZ Posts: 252 Drives: 2012 Nismo Rep Power: 12	Install complete! The Swift's arrived from 3 Corner Garage muy pronto, and I did the install today with the help of a friend. Followed the DIY, and it was a breeze, though it did take about two hours to get the fronts in (an impact wrench is definitely your friend!). Rears couldn't be easier. I started out stock with 1 7/8" in front, and 1 1/2" in the rear. After the install and a short shake down ride, I ended up with 1" in the front, and 3/4" in the rear. We'll give it about a week to settle and then I'll get an alignment done to check the specs. Just from a feel stand point, the steering seems as neutral and centered as before (no major alignment issues). On city streets, the car seems to "settle" a bit faster than the stock Nismo springs, and the car feels a bit flatter in sharp corners. I haven't ran it hard yet, but will get a chance later in the week. I'll try and get a pic or two up in the next day or so. Next up, install of the Z1 oil cooler, and then the long wait for the FI CBE.

05-19-2013, 06:09 PM	#1732 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	Installed Swifts today; dramatically reduced body roll; made taking corners a blast. I'm very happy w/ the performance aspect of it, but my front chin spoiler is not. Those that are thinking about getting these, stop thinking and get them; you will be very happy. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

05-15-2013, 05:40 AM	#1726 (permalink)
JtodaR_Z34 Base Member Join Date: Apr 2013 Location: California Posts: 12 Drives: 2013 Nissan 370Z M6 Rep Power: 12	This is a great thread. I was looking at buying some springs and looked at all other brands but was leaning more towards swifts and this just made it easier for me to decide. Swift springs it is!

05-20-2013, 07:34 AM	#1735 (permalink)
/Angelo350Z/ A True Z Fanatic Join Date: Feb 2013 Location: Germany Posts: 2,230 Drives: Z34 \| MK7 \| F82 Rep Power: 3660	After two months, I've learned to ignore the occasional sounds . The ride is definitely better. Though, I wish the springs gave a bit more drop. Still better than the Eibach Prokit springs I have on my 350Z. The fenders have a cast a shadow on the tires creating the illusion of a bigger fender gap. __________________ 2013 MB NISSAN 370Z SPORT Last edited by /Angelo350Z/; 05-20-2013 at 07:36 AM.

05-20-2013, 08:27 AM	#1736 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	I got to check out my other Z'z at Zdayz and all the swift ones had the same (almost 2 fingers) gap between the rear tires and fender as mine do. Since my rear offset is +0 the wheels pokes out a lot and that's why it looks off. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

05-20-2013, 08:33 AM	#1737 (permalink)
jlbrenne Track Member Join Date: Jul 2012 Location: Atlanta GA Posts: 586 Drives: Roadster BLACK Rep Power: 14	Would you guys still do the swifts again or pick something else???? __________________ Black Rdstr:GTHAUS Meisterschaft FCB.Tint(20%+50% windshield).3"Carb Stub Ant.Z Lisc Plt & LED.Rr fog.VF Fend.Cust Handles.EVO Cust Rdstr Wing.Varrstoen 19" Whls.Stillen HFC&CAI.Swift Spring.VQ37 Cust Mani.Z1 UPREV.Amuse.310whp/254torq

05-20-2013, 08:37 AM	#1738 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	I'd do it again and again, unless I needed more drop then KW V3's for me. Spring wise i'd go no other route. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

05-20-2013, 03:30 PM	#1739 (permalink)
jlbrenne Track Member Join Date: Jul 2012 Location: Atlanta GA Posts: 586 Drives: Roadster BLACK Rep Power: 14	alright guys i just pulled the tripper on the swifts. i was reading on here a few days ago about some other type of gasket that i should buy for the install of the swifts..it cost like $25 or something...are these necessary..or i guess my real question is do i need anything other than the springs for the swift install???? __________________ Black Rdstr:GTHAUS Meisterschaft FCB.Tint(20%+50% windshield).3"Carb Stub Ant.Z Lisc Plt & LED.Rr fog.VF Fend.Cust Handles.EVO Cust Rdstr Wing.Varrstoen 19" Whls.Stillen HFC&CAI.Swift Spring.VQ37 Cust Mani.Z1 UPREV.Amuse.310whp/254torq

05-20-2013, 06:34 PM	#1740 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	^ I installed springs and reused the jacket/sleeves on the front. I have no weird noises coming from anywhere. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 07:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 04:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 10:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 10:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 06:58 PM