+ Toe Bolt Question +

ZForce · 08-05-2010, 11:27 AM

Yes

jadeb0x · 08-05-2010, 12:19 PM

Quote:

Originally Posted by ZForce

Yes

yes i need the toe bolts? or yes i can get away with the camber arms only?

i think i answered my question already though, i checked my alignment specs and my toe was adjusted properly. i was just told by a shop that i needed the toe bolts, probably just trying to make an extra buck...

czheng51 · 05-27-2011, 04:40 PM

SPC toe bolt? Do i need to enlarge the hole so it would fit? Because from what i've heard the stock toe bolt is smaller than the SPC toe bolt which means i would have to drill the hole bigger? Am i right or wrong?

Fire · 05-27-2011, 05:14 PM

The eibach rear camber arms have the toe bolt kit in it. I had both installed for my alignment. Now it has been aligned within factory specs. My drop is about an inch it is also with eibach.

ZForce · 05-27-2011, 05:22 PM

Quote:

Originally Posted by czheng51

SPC toe bolt? Do i need to enlarge the hole so it would fit? Because from what i've heard the stock toe bolt is smaller than the SPC toe bolt which means i would have to drill the hole bigger? Am i right or wrong?

Yes, you will need to enlarge the hole. Unless you have access to an air gun with a special rat tail grouter type bit (not sure on the exact name) you will be there for hours and hours. It's the one time you may want a shop to hog out the hole unless you have the tools. The bit alone I heard runs about $60 +. There is a paper template in the SPC camber kit + toe bolt that you would use to hog out the hole.

batman_4 · 05-27-2011, 05:28 PM

Quote:

Originally Posted by ZForce

Yes, you will need to enlarge the hole. Unless you have access to an air gun with a special rat tail grouter type bit (not sure on the exact name) you will be there for hours and hours. It's the one time you may want a shop to hog out the hole unless you have the tools. The bit alone I heard runs about $60 +. There is a paper template in the SPC camber kit + toe bolt that you would use to hog out the hole.

, had a shop do it for me...was charged $65

ZForce · 05-27-2011, 05:32 PM

Quote:

Originally Posted by batman_4

, had a shop do it for me...was charged $65

That is what I was saying, to just have a shop do it, because at $60 for the drill bit is a waste unless you had other uses for it. Nothing werd about it.

batman_4 · 05-28-2011, 03:00 AM

Quote:

Originally Posted by ZForce

That is what I was saying, to just have a shop do it, because at $60 for the drill bit is a waste unless you had other uses for it. Nothing werd about it.

never said it was "weird".....its werd as is WORD

chops · 05-28-2011, 05:18 AM

how low are you?! im at almost 3 degrees camber and im a few inches off the ground, but my toe is perfectly in spec!

ZForce · 05-30-2011, 11:51 AM

Quote:

Originally Posted by batman_4

never said it was "weird".....its werd as is WORD

batman_4, I am such a DORK,

all these years I thought the lil sign meant weird.

05-27-2011, 05:14 PM	#19 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 42	The eibach rear camber arms have the toe bolt kit in it. I had both installed for my alignment. Now it has been aligned within factory specs. My drop is about an inch it is also with eibach. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need help demon bolt	thegraylady	Engine & Drivetrain	11	09-16-2010 01:08 PM
Why is it always the LAST *@#$& BOLT!?!	Dembflyr	DIY Section (Do-It-Yourself)	13	04-23-2010 09:04 PM
Lug bolt covers	1013mm	Wheels & Tires	4	02-05-2010 09:07 PM
Bolt-ons = less restrictive, Better MPG???	spearfish25	Intake/Exhaust	21	07-28-2009 09:08 PM
Bolt pattern?	370ZINMO	Wheels & Tires	10	12-14-2008 09:13 PM

08-05-2010, 11:27 AM	#16 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 20	Yes

05-27-2011, 04:40 PM	#18 (permalink)
czheng51 Base Member Join Date: Sep 2010 Location: Los Angeles Posts: 110 Drives: MITSUBISHI EVO X Rep Power: 14	SPC toe bolt? Do i need to enlarge the hole so it would fit? Because from what i've heard the stock toe bolt is smaller than the SPC toe bolt which means i would have to drill the hole bigger? Am i right or wrong?

05-28-2011, 05:18 AM	#24 (permalink)
chops A True Z Fanatic Join Date: Oct 2010 Location: NA Posts: 1,732 Drives: NA Rep Power: 21	how low are you?! im at almost 3 degrees camber and im a few inches off the ground, but my toe is perfectly in spec!