Motive bleeder which O ring?

Bryzed

It would appear that I have a faulty item, as it won't hold pressure as I can hear the air leaking from inside the pressure guage

Averying

I also had a faulty pressure gauge when I received my bleeder. They sent me a new one


Sent from my iPhone using Tapatalk

__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes

Bryzed

Must be a faulty batch, I'm in Australia and the bleeder came from Las Vegas so let's see how good Amazon is with sorting it all out !

Averying

I directly called motive even though I think mine was also purchased thru Amazon. They were quick to ship out another gauge


Sent from my iPhone using Tapatalk

__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes

Bryzed

Turns out it was the fitting that the gauge screws into was leaking. Motive should really have used an O ring to seal the fitting to the plastic bottle, I just putsilicone thread sealer on the fitting and now it holds pressure.

ZoomZ

Wasn't it at least put in with Teflon tape from Factory?

__________________
“Action without vision is a nightmare.”

Bryzed

No, just some kind of glue. The hole that it goes through was pretty rough too so I cleaned it up and used PTFE tape and silicone thread sealer to seal it. Pretty poor quality control by motive