Nissan 370Z Forum  

Divorced style longer spring length

Hey everyone, I need a quick sanity check here. My BC BR divorced style set up is sitting too low now that I adjusted my front ride height and put

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Brakes & Suspension


Like Tree3Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 04-09-2022, 07:30 AM   #1 (permalink)
Enthusiast Member
 
Averying's Avatar
 
Join Date: May 2018
Location: Rhode Island
Posts: 396
Drives: '09 370Z, '03 G35
Rep Power: 11063
Averying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond repute
Default Divorced style longer spring length

Hey everyone, I need a quick sanity check here.

My BC BR divorced style set up is sitting too low now that I adjusted my front ride height and put on new PS4S. Rear is 26.5”-26.75” ground to fender. I’d like to get it to around 27-27.25”, but the top adjuster seems to be maxed out.

I’m think the easiest solution here is to get longer springs. If the BC Springs that come with these kits are 200mm (not sure exact length, just using as example), and I go up to a 220mm, that’d allow me to lower the height adjuster on the spring 20mm to match my current height. At that point I would have enough room in the adjuster to increase the height to what I need. Additionally since the rear motion ratio is ~.5, to get .75” of ride height, I should only need .375” (9.5mm) length increase at the adjuster.

Am I overlooking anything here?

Tldr; can I just get a longer spring with a divorced style set up to increase my right height?


Sent from my iPhone using Tapatalk
__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes

Last edited by Averying; 04-09-2022 at 07:34 AM.
Averying is offline   Reply With Quote
Old 04-09-2022, 10:22 AM   #2 (permalink)
A True Z Fanatic
 
Join Date: Apr 2011
Location: Sacramento
Posts: 3,157
Drives: 15 370Z Nismo 6MT
Rep Power: 203225
OptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond repute
Default

You can run a 7 inch spring but from talking to SPL..a. 6 inch spring should have enough range for most people

You said you have a spring perch adjuster - are you using the SPL midlinK/

What spring do you have now?
Averying likes this.
__________________
OptionZero Build Thread
OptionZero is offline   Reply With Quote
Old 04-09-2022, 11:25 AM   #3 (permalink)
A True Z Fanatic
 
Join Date: Jun 2014
Location: Ga
Posts: 13,467
Drives: 2013 Nismo 370z
Rep Power: 2684390
Spooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond repute
Default

Some coilover kits can't hit the stock ride height. A call to BC should be in order.
Averying likes this.
Spooler is offline   Reply With Quote
Old 04-09-2022, 01:26 PM   #4 (permalink)
Enthusiast Member
 
Averying's Avatar
 
Join Date: May 2018
Location: Rhode Island
Posts: 396
Drives: '09 370Z, '03 G35
Rep Power: 11063
Averying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond repute
Default

Quote:
Originally Posted by OptionZero View Post
You can run a 7 inch spring but from talking to SPL..a. 6 inch spring should have enough range for most people

You said you have a spring perch adjuster - are you using the SPL midlinK/

What spring do you have now?

No I’ve got the spring height adjusters that comes with the BC kit. I’m unsure about the spring. Forgot to check the PN on it when I was under the car and I can’t find a length for this kit online. This kit also has soft spring rates (8k rear) so that might mean I need a longer than normal spring (compared to other coilover kits) to get closer to oem height.
__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes
Averying is offline   Reply With Quote
Old 04-09-2022, 01:29 PM   #5 (permalink)
Enthusiast Member
 
Averying's Avatar
 
Join Date: May 2018
Location: Rhode Island
Posts: 396
Drives: '09 370Z, '03 G35
Rep Power: 11063
Averying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond repute
Default

Quote:
Originally Posted by Spooler View Post
Some coilover kits can't hit the stock ride height. A call to BC should be in order.

Yep that’s what I figured. It’s odd that the spring adjuster looks to have at least 40mm MORE room to lower the height, which would mean this kit is capable of another 3inch drop in ride height. So probably over 4” drop capable compared to OEM. Who seriously wants to be that low???


Sent from my iPhone using Tapatalk
__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes
Averying is offline   Reply With Quote
Old 04-09-2022, 02:15 PM   #6 (permalink)
A True Z Fanatic
 
Join Date: Apr 2011
Location: Sacramento
Posts: 3,157
Drives: 15 370Z Nismo 6MT
Rep Power: 203225
OptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond repute
Default

You should look at the Spl mid links which have additional height adjustment
https://www.splparts.com/products/37...mid-links.html

Contact BC racing to get your spring length. Or just pull the spring and measure it

The contact SPL and check if the adjustment range gets you where you want
Averying likes this.
__________________
OptionZero Build Thread
OptionZero is offline   Reply With Quote
Old 04-09-2022, 02:20 PM   #7 (permalink)
Enthusiast Member
 
Averying's Avatar
 
Join Date: May 2018
Location: Rhode Island
Posts: 396
Drives: '09 370Z, '03 G35
Rep Power: 11063
Averying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond repute
Default

Quote:
Originally Posted by OptionZero View Post
You should look at the Spl mid links which have additional height adjustment
https://www.splparts.com/products/37...mid-links.html

Contact BC racing to get your spring length. Or just pull the spring and measure it

The contact SPL and check if the adjustment range gets you where you want

The BC adjuster has plenty of adjustment range (I’d guess ~50mm total so 4” in ride height), it’s just that they must tailor their coilover kit towards people who want their cars super low. I’ve got to call BC and see what length comes with this kit, and I’ll probably just order a set of springs from them with an extra 20-30mm in length


Sent from my iPhone using Tapatalk
__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes
Averying is offline   Reply With Quote
Old 04-09-2022, 09:43 PM   #8 (permalink)
Track Member
 
Join Date: Mar 2016
Location: San jose
Posts: 846
Drives: 2013 370z sport
Rep Power: 3384
Jhill has a reputation beyond reputeJhill has a reputation beyond reputeJhill has a reputation beyond reputeJhill has a reputation beyond reputeJhill has a reputation beyond reputeJhill has a reputation beyond reputeJhill has a reputation beyond reputeJhill has a reputation beyond reputeJhill has a reputation beyond reputeJhill has a reputation beyond reputeJhill has a reputation beyond repute
Default

This is why you have to ask or look at the adjustment range before you buy the coil overs. Only a few offer the ability to go as high as OEM powertrix being one of them and possibly fortune (one rep said yes another no), stance and I believe arrogosta. BC told me no. So even if you change springs the shocks themselves may not be long enough to safely raise that high.
Jhill is offline   Reply With Quote
Old 04-09-2022, 10:06 PM   #9 (permalink)
Enthusiast Member
 
Averying's Avatar
 
Join Date: May 2018
Location: Rhode Island
Posts: 396
Drives: '09 370Z, '03 G35
Rep Power: 11063
Averying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond repute
Default

Quote:
Originally Posted by Jhill View Post
This is why you have to ask or look at the adjustment range before you buy the coil overs. Only a few offer the ability to go as high as OEM powertrix being one of them and possibly fortune (one rep said yes another no), stance and I believe arrogosta. BC told me no. So even if you change springs the shocks themselves may not be long enough to safely raise that high.

Yea these coilovers were on the car when I bought it, so can’t really do anything about that. Worst case I’ll have to run a bit more preload on the springs to avoid putting the damper length at an unsafe setting. Seeing as I only want about .5” more ride height, I doubt it will be an issue. I’ll still talk to the guys at BC though and see what they think


Sent from my iPhone using Tapatalk
__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes
Averying is offline   Reply With Quote
Old 04-15-2022, 02:44 PM   #10 (permalink)
Enthusiast Member
 
Averying's Avatar
 
Join Date: May 2018
Location: Rhode Island
Posts: 396
Drives: '09 370Z, '03 G35
Rep Power: 11063
Averying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond repute
Default

Talked with BC about this. They provide a 210mm long V-barrel spring with their divorced kits on the 370z. Luckily they also make a 230mm long V barrel spring for g35 applications but I confirmed with them that it will fit on the 370Z setup. I wanted to avoid purchasing any linear spring adapters.

This spring length will put me just about perfectly in the middle of the rear height adjustment range with a 1” drop from stock.

Install next week sometime when they arrive.


Sent from my iPhone using Tapatalk
__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes
Averying is offline   Reply With Quote
Old 04-15-2022, 03:42 PM   #11 (permalink)
A True Z Fanatic
 
Join Date: Apr 2011
Location: Sacramento
Posts: 3,157
Drives: 15 370Z Nismo 6MT
Rep Power: 203225
OptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond repute
Default

Wait is that measurement right?

230mm is just over 9 inches
__________________
OptionZero Build Thread
OptionZero is offline   Reply With Quote
Old 04-15-2022, 04:55 PM   #12 (permalink)
Enthusiast Member
 
Averying's Avatar
 
Join Date: May 2018
Location: Rhode Island
Posts: 396
Drives: '09 370Z, '03 G35
Rep Power: 11063
Averying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond repute
Default Divorced style longer spring length

Quote:
Originally Posted by OptionZero View Post
Wait is that measurement right?

230mm is just over 9 inches

Yup and they provide a 210mm spring with the BR kit. They are only 8k in the rear… pretty soft


Sent from my iPhone using Tapatalk
__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes
Averying is offline   Reply With Quote
Old 04-15-2022, 06:55 PM   #13 (permalink)
A True Z Fanatic
 
Join Date: Apr 2011
Location: Sacramento
Posts: 3,157
Drives: 15 370Z Nismo 6MT
Rep Power: 203225
OptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond repute
Default

What is your ride height?

That seems excessively tall and soft
__________________
OptionZero Build Thread
OptionZero is offline   Reply With Quote
Old 04-15-2022, 07:13 PM   #14 (permalink)
Enthusiast Member
 
Averying's Avatar
 
Join Date: May 2018
Location: Rhode Island
Posts: 396
Drives: '09 370Z, '03 G35
Rep Power: 11063
Averying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond repute
Default

Quote:
Originally Posted by OptionZero View Post
What is your ride height?

That seems excessively tall and soft

Right now about 26.5” in the rear. Seems to be not even a fingers gap with the new 325 PS4S and its uneven in the rear so I don’t have any range in the adjuster to level it out.

I’m looking for ~1” drop from stock in the rear. New England roads are absolutely terrible… any lower and I’m asking for trouble.

Doesn’t make much sense for me to mess with spring rates since I’d be putting the dampers out of the range for which they’re designed. Better to save up for a better set of coilovers in the future.


Sent from my iPhone using Tapatalk
__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes
Averying is offline   Reply With Quote
Old 04-15-2022, 08:21 PM   #15 (permalink)
Enthusiast Member
 
Averying's Avatar
 
Join Date: May 2018
Location: Rhode Island
Posts: 396
Drives: '09 370Z, '03 G35
Rep Power: 11063
Averying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond reputeAverying has a reputation beyond repute
Default Divorced style longer spring length

Quote:
Originally Posted by OptionZero View Post
You can run a 7 inch spring but from talking to SPL..a. 6 inch spring should have enough range for most people

You said you have a spring perch adjuster - are you using the SPL midlinK/

What spring do you have now?

I’m sure a 6 or 7 inch spring is fine with the SPL mid link because the bottom of the spring actually sits above the control arm plane. Whereas with the OEM spring bucket, the bottom of the spring is sitting much lower, thus a ~9 inch spring is needed. Plus with a lower spring rate, i imagine I’d be slamming into coil bind pretty easily if I had such a short spring.


Sent from my iPhone using Tapatalk
__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes
Averying is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
True Rear vs. Divorced spring (causes damage?) 370Tyler Brakes & Suspension 36 02-28-2020 11:51 AM
Spring length question Jmatchley86 Brakes & Suspension 8 10-12-2019 05:54 PM
Minnesota style Spring/Summer cruise SmoothZ Mid Western Region 24 06-01-2014 08:27 AM
OEM Spring length. GSS138 Brakes & Suspension 14 02-03-2014 05:27 PM
OEM front spring Length GSS138 Brakes & Suspension 0 11-12-2013 03:29 PM


All times are GMT -5. The time now is 06:33 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2