Camber

KMO-II · 06-18-2021, 04:20 PM

My camber seems way off. Just wore the insides off of new rear tires in just 9'000 miles. Had dealer do alignment after two weeks of riding on these tires. Went to dealer today to inspect and was told my camber was perfect to the "Z" specs. Should i get camber control arms or coilovers to fix this over-camber ? thanks for inputs .

BGTV8 · 06-18-2021, 05:23 PM

That looks like toe is out, not camber

KMO-II · 06-18-2021, 05:45 PM

ohhhh. Thank u. They just told me that as well at the dealer . Now loud knocking like my tire was going to fall off when i drove away. Back at dealer. Sheesh !!

Rusty · 06-18-2021, 06:02 PM

What are the specs?

KMO-II · 06-18-2021, 09:31 PM

i wish i knew. i believe 3.2 for the rear. He just had it on note paper what the were and what they were adjusted to.

Leingod · 06-18-2021, 10:27 PM

Quote:

Originally Posted by Rusty

What are the specs?

0.33. Wait... That's spark plugs. 3?

Rusty · 06-18-2021, 10:53 PM

Quote:

Originally Posted by KMO-II

i wish i knew. i believe 3.2 for the rear. He just had it on note paper what the were and what they were adjusted to.

Your camber shouldn't more than -1.8 unless you track. Yeah, that -3.2 camber will wear the insides of the tires.

OptionZero · 06-20-2021, 06:27 PM

Anywhere that doesn’t give you an alignment printout is a place you should never trust. Get the ******* results, it’s all on a computer

Rear alignment had a small level of adjustment. Wear and tear can cause alignment to go out of spec.

A damaged component can be replaced but any significant adjustment needs new , adjustable parts, preferably from SPL

KMO-II · 06-21-2021, 08:16 AM

i appreciate your input.. Thank you...

OptionZero · 06-21-2021, 11:26 AM

Quote:

Originally Posted by Rusty

Your camber shouldn't more than -1.8 unless you track. Yeah, that -3.2 camber will wear the insides of the tires.

what kinda dealer doesn't give an alignment printout

redondoaveb · 06-21-2021, 11:44 AM

Quote:

Originally Posted by OptionZero

what kinda dealer doesn't give an alignment printout

Westend Alignment is one of the top track/street alignment shops in So Cal. They don't give you a computerized print out. Just a written alignment spec sheet.

OptionZero · 06-21-2021, 01:10 PM

if it has all the pertinent data and it's written, thats one thing

but it sounds like this dude's dealer basically wrote on a scrap of paper camber measurement only AND no real diagnosis or fix, which seems like malpractice

redondoaveb · 06-21-2021, 02:04 PM

Quote:

Originally Posted by OptionZero

if it has all the pertinent data and it's written, thats one thing

but it sounds like this dude's dealer basically wrote on a scrap of paper camber measurement only AND no real diagnosis or fix, which seems like malpractice

Definitely agree

KMO-II · 06-22-2021, 06:21 PM

i'll check my paperwork and see. But when he briefed me , he showed me the techs notes that he had written down.

KMO-II · 06-22-2021, 06:30 PM

Yeah they showed me the before and after specs on a sheet of paper. My invoice only stated camber and toe out of spec . Performed routine alignment back to manufactures 370z specs. i should've at least asked for those notes . ugh.

06-18-2021, 05:23 PM	#2 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,503 Drives: 09 Nissan 370Z M6 Rep Power: 29907	That looks like toe is out, not camber JARblue, KMO-II and redondoaveb like this.

06-18-2021, 06:02 PM	#4 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,865 Drives: 2011 Nismo GM 6M Rep Power: 2684436	What are the specs? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

06-18-2021, 09:31 PM	#5 (permalink)
KMO-II Base Member Join Date: Feb 2013 Location: new mexico Posts: 189 Drives: 370Z NISMO - 2014 Rep Power: 5014	i wish i knew. i believe 3.2 for the rear. He just had it on note paper what the were and what they were adjusted to. Last edited by KMO-II; 06-18-2021 at 09:37 PM.

06-20-2021, 06:27 PM	#8 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,160 Drives: 15 370Z Nismo 6MT Rep Power: 203226	Anywhere that doesn’t give you an alignment printout is a place you should never trust. Get the ******* results, it’s all on a computer Rear alignment had a small level of adjustment. Wear and tear can cause alignment to go out of spec. A damaged component can be replaced but any significant adjustment needs new , adjustable parts, preferably from SPL JARblue, Rusty and KMO-II like this. __________________ OptionZero Build Thread

06-21-2021, 01:10 PM	#12 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,160 Drives: 15 370Z Nismo 6MT Rep Power: 203226	if it has all the pertinent data and it's written, thats one thing but it sounds like this dude's dealer basically wrote on a scrap of paper camber measurement only AND no real diagnosis or fix, which seems like malpractice KMO-II, sx moneypit and redondoaveb like this. __________________ OptionZero Build Thread

06-18-2021, 05:45 PM	#3 (permalink)
KMO-II Base Member Join Date: Feb 2013 Location: new mexico Posts: 189 Drives: 370Z NISMO - 2014 Rep Power: 5014	ohhhh. Thank u. They just told me that as well at the dealer . Now loud knocking like my tire was going to fall off when i drove away. Back at dealer. Sheesh !!

06-21-2021, 08:16 AM	#9 (permalink)
KMO-II Base Member Join Date: Feb 2013 Location: new mexico Posts: 189 Drives: 370Z NISMO - 2014 Rep Power: 5014	i appreciate your input.. Thank you...

06-22-2021, 06:21 PM	#14 (permalink)
KMO-II Base Member Join Date: Feb 2013 Location: new mexico Posts: 189 Drives: 370Z NISMO - 2014 Rep Power: 5014	i'll check my paperwork and see. But when he briefed me , he showed me the techs notes that he had written down.

06-22-2021, 06:30 PM	#15 (permalink)
KMO-II Base Member Join Date: Feb 2013 Location: new mexico Posts: 189 Drives: 370Z NISMO - 2014 Rep Power: 5014	Yeah they showed me the before and after specs on a sheet of paper. My invoice only stated camber and toe out of spec . Performed routine alignment back to manufactures 370z specs. i should've at least asked for those notes . ugh.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] SPL TITANIUM Series Front Upper Camber Arms & Rear Camber Arms ($500 shipped)	grocerylist	Parts for sale (Private Classifieds)	6	07-10-2019 09:10 AM
[FOR SALE] Used SPC Front Camber & Rear Camber/Toe	tbenson5	Parts for sale (Private Classifieds)	5	03-30-2019 10:28 AM
[FOR SALE] USED: SPL Front and Rear Camber, SPC FRont Camber	martin82	Parts for sale (Private Classifieds)	15	12-30-2015 12:01 PM
Coilovers + Camber Kit-$1099, Tein + Camber Kit-$349 & More!	Marti	Suspension/Brakes	16	03-22-2013 11:39 AM
Front Camber vs. Rear Camber	osbornsm	Brakes & Suspension	2	02-21-2012 04:12 PM