Front/rear sway bar questions

Originally Posted by Brendan

There are a lot of variables there to consider. What are the spring rates you went with? What are the alignment settings? What is the ride height? How much down travel do you have? How are the dampers set up? Etc...

I ran into some really weird handling issues with my car when I went to higher rate springs. The car would dart around on bumps so badly that a passenger could feel it. My issue came down to not enough down travel meaning that one or more wheels was constantly struggling to make contact with the ground. What helped me was adding a set of helper springs to the car. This gave me way more down travel and made the car handle bumps a lot better.

I also don't run a rear bar because I found it much easier to get the power down without one. I just increased my spring rates to get the right balance or rotation for my needs.

Here is a link to my short write up from by build thread:
Rear helper springs