|
Hmm one thing the alignment tech did tell me is that my subframe has been removed before and placed back on because he can tell by the bolts that have
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
07-23-2019, 02:17 PM
|
#34 (permalink) |
|
Track Member
Join Date: Jul 2015
Location: South Australia, Austra
Posts: 921
Drives: 15' 370Z A/T AMM TT
Rep Power: 26   |
Hmm one thing the alignment tech did tell me is that my subframe has been removed before and placed back on because he can tell by the bolts that have been put back on seem to be different. And there is a bit of sway in the subframe.
He is correct, a while back I had Z1 subframe collar kit installed but after a about 1000 miles with it the original installer removed the Z1 subframe back to the factory subframe collar because they believed it was one of the reasons causing the car too become too stiff in the rear and loose traction. Unsure how accurate their analysis is on the Z1 subframe. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY YAW sensor Switch (how to deactivate stability control) | Just1nfj | DIY Section (Do-It-Yourself) | 18 | 09-12-2023 12:54 PM |
| 370Z Drift Project + angle + stability + control | URA | Track / Autocross / Drifting / Dragstrip | 47 | 01-31-2017 09:09 AM |
| Highspeed Dynamic Stability Control Question | Troyz | Nissan 370Z General Discussions | 9 | 09-28-2013 10:06 AM |
| 370 z Stability problem | Ghaz | Wheels & Tires | 11 | 07-08-2013 12:28 PM |
| lateral stability problem | TKomodo | Wheels & Tires | 16 | 10-21-2012 06:44 PM |
75Likes
Threaded Mode
