Unstable during braking carbotech xp10/xp8

Rusty

You could try running XP8's all the way around. And adding a little toe in, in the front. How much toe in do have in the rear?

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

B&W_Evader

2nd the motion...going with xp8 all around.

__________________
|RIP|6spd-sport|OSG-LSD|XP8|RBF600|Eibach Sways|RE-71R|FI-34Row|Gen3-CAI|Yaw P.S.|

Hotrodz

I have, a similar set up with no issues during braking. I am running -2.6 front and -2.0 rear with a touch of toe on for both.

Sent from my SM-N910P using Tapatalk

__________________
Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:|Fast Intentions 3" TT-TDX|SpecialtyZ/Fast Intentions 72 Row Oil Cooler|SZ 6 Puck Clutch & Flywheel|3GsCustoms|Z1|Wavetrac|Hotchkis|Whiteline |Blitz|Fortune Auto 500|Fujimura|SPL|H&R|TK|TWM|RPM Rollbar|Sparco|Next Level Performance|TrackSpec|AeroFlow Dynamics|Pioneer|

fryzia23

Maybe little more camber in the rear would help. I get to do my own alignments so I could play with it with no extra cost. Also been thinking that possible extra brake bite causes more aggressive weight transfer towards the front which stock suspension can't handle. I see you upgraded to coilovers which I am sure could be a factor for more stable braking. I'm planning track day in two weeks so would love to figure this out before I get back on the track.

fryzia23

Not sure how much toe in at the rear but as far I can remember it wasn't much. It's been awhile since I did an alignment so I will do one this Saturday and see if anything changed. Still running stock toe bolts so maybe something moved. I will start with that before anything else.