Extended studs question!!

AARONHL · 07-31-2017, 03:16 PM

Quote:

Originally Posted by AstatenateZ

Ordered them @AARON ! Thanks man! Heard install is pretty easy, remove rotor / caliper, knock out old ones with hammer, impact new ones on using lug nut / some washers to pull the new stud through? Anything else I need to know?

yea real easy. any hammer will do they pop right out. make sure when you put the new stud in it goes in straight

And you have strong hands to hold the hub if your car is rear wheel drive (maybe use some rubber gloves with good grip)

Jhill · 08-01-2017, 01:31 AM

The installer tool helps too but needs a washer between the hub and tool otherwise the bearing portion hits the hub face. Also stop tightening immediately once it is bottomed out or you'll be in the dark with a grinder grinding off the back of the stud so you can pull it through after the nut has siezed itself onto the stud threads (not having a humongous impact gun probably helps too). Do not ask how I learned this.

08-01-2017, 01:31 AM	#2 (permalink)
Jhill Track Member Join Date: Mar 2016 Location: San jose Posts: 855 Drives: 2013 370z sport Rep Power: 3386	The installer tool helps too but needs a washer between the hub and tool otherwise the bearing portion hits the hub face. Also stop tightening immediately once it is bottomed out or you'll be in the dark with a grinder grinding off the back of the stud so you can pull it through after the nut has siezed itself onto the stud threads (not having a humongous impact gun probably helps too). Do not ask how I learned this. AstatenateZ likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Extended wheel studs	richie_240sx-	Parts for sale (Private Classifieds)	0	07-16-2016 01:03 AM
15 mm spacers and extended studs?	fastguy9r	Wheels & Tires	2	03-28-2013 06:10 PM
[FOR SALE] ARP Extended Studs BNIB Set of 20	handled	Parts for sale (Private Classifieds)	0	01-05-2013 06:47 PM
extended studs from 20 mm vs. 10 mm spacer	khern11	Wheels & Tires	1	03-22-2011 04:15 PM