Voodoo13 camber rods

Halfkiddio

The motion ratio is basically the same. You will be able to tell if there are any clearance issues when you drive it. And considering Voodoo13 has done actual R&D work, I think they would've made them curved if they had to. You don't need to have a curved arm to adjust camber, as the thing that actually adjusts camber is the distance from the inner mounting point to the outer point, not the angle of the arm.

Now, on the other side of that, you can change the drop height by raising or lowering the mounting points in relation to each other, but that would be VERY obviously specified in the product description, such as it is with Voodoo's drop spindle angle kit.