View Single Post
Old 09-08-2016, 11:27 PM   #9 (permalink)
Orionx1
Base Member
 
Orionx1's Avatar
 
Join Date: Dec 2015
Location: Phoenix, AZ
Posts: 14
Drives: 09 370Z Nismo
Rep Power: 9
Orionx1 is on a distinguished road
Default

Quote:
Originally Posted by Tractionless View Post
I installed straight with large diameter TruHart camber bars on an all OE suspension, wheels etc. 370z Sport/Touring without issue. When I brought the car to have the alignment checked they couldn't get it flatter than -2*. Brought it back with the bars and they couldn't get it flatter than -1.7* before the toe started to go out of spec. Now I'm awaiting toe bolts. I'm trying to get the camber to a max negative of -1* to save the inside of the ReAR tires, especially after widening the wheels to the inside and rolling on 325/30/19 tires.
Tractionless are you lowered? or when you say OE do you mean stock height?
would love see some pics of those 325s stuffed in that wheel-well.
i just went to 305s on OE Nismo wheels and i had moment or two where i thought they were going to be too big.
Orionx1 is offline   Reply With Quote