Brake flush or brake bleed?

Originally Posted by Scott@Synergy

I started RL, RR, FL, FR

Originally Posted by Nissan 370z Factory Service Manual

1. Connect a vinyl tube to the bleeder valve of the rear right brake.
2. Fully depress the brake pedal 4 to 5 times.
3. Loosen the bleeder valve and bleed air with the brake pedal depressed, and then quickly tighten the
bleeder valve.
4. Repeat steps 2 and 3 until all of the air is out of the brake line.
5. Tighten the bleeder valve to the specified torque.
• Front disc brake
- 2 Piston type: refer to BR-43, "BRAKE CALIPER ASSEMBLY (2 PISTON TYPE) : Exploded View".
- 4 Piston type: refer to BR-47, "BRAKE CALIPER ASSEMBLY (4 PISTON TYPE) : Exploded View".
• Rear disc brake
- 1 Piston type: refer to BR-56, "BRAKE CALIPER ASSEMBLY (1 PISTON TYPE) : Exploded View".
- 2 Piston type: refer to BR-60, "BRAKE CALIPER ASSEMBLY (2 PISTON TYPE) : Exploded View".
6. Perform steps 1 to 5 for the rear right brake → front left brake → rear left brake → and front right brake in order.