CS Raptor (Fujimara Rep Bumper)

CarbonSignal · 12-09-2014, 06:32 AM

Quote:

Originally Posted by Zoren 370

Do you also make that side skirt on the black Z?
What do you call that and how much in frp.

Thread for bumper though but do send us a pic of black Z which you referring to

axmea? · 12-09-2014, 08:14 AM

Quote:

Originally Posted by Zoren 370

Do you also make that side skirt on the black Z?
What do you call that and how much in frp.

That is an amuse style skirt. Lots of them made here in the US.

Zoren 370 · 12-09-2014, 06:42 AM

Sorry for that its the black Z below with the side skirt.
Thanks.

Quote:

Originally Posted by CarbonSignal

Hey guys as you know we made a rep and slightly revised CS version which we can Raptor.

Below are the pics of one we did just now with CF middle part sand CF side vents

Below pics courtesy of Glokwork bumper in FRP

In FRP 700$
With CF middle and side vents 950$

Shipping can be done both by SEA and by AIR

Donald@Carbonsignal · 12-09-2014, 12:28 PM

The black z has amuse style sides, the grey z has stock sides and fuji style side blades.

Sent from my iPhone using Tapatalk

puckshaw · 12-10-2014, 10:11 AM

Just got mine installed. Needs LOTS of trimming to fit the BP kit.

cycy89 · 12-10-2014, 10:13 AM

Quote:

Originally Posted by puckshaw

Just got mine installed. Needs LOTS of trimming to fit the BP kit.

What kit is that? I have F.I. set up

puckshaw · 12-10-2014, 10:13 AM

Quote:

Originally Posted by cycy89

What kit is that? I have F.I. set up

Boosted Performance

40th_z · 12-10-2014, 01:13 PM

Quote:

Originally Posted by puckshaw

Just got mine installed. Needs LOTS of trimming to fit the BP kit.

damn that looks good

, i should be getting my installed in a wk or two

cycy89 · 12-10-2014, 10:18 AM

Hopefully it will fit this https://vimeo.com/114144860

cycy89 · 12-10-2014, 10:23 AM

Quote:

Originally Posted by cycy89

Hopefully it will fit this https://vimeo.com/114144860

puckshaw · 12-10-2014, 10:20 AM

I'd say there's zero chance of fitting any inter cooler without trimming it. My installer said it wasn't even close to fitting. Had to cut off like 6" and reinforce it.

cycy89 · 12-10-2014, 10:22 AM

Quote:

Originally Posted by puckshaw

I'd say there's zero chance of fitting any inter cooler without trimming it. My installer said it wasn't even close to fitting. Had to cut off like 6" and reinforce it.

Damn.. and I've got the F.I. crash bar...

cycy89 · 12-10-2014, 10:24 AM

Quote:

Originally Posted by puckshaw

I'd say there's zero chance of fitting any inter cooler without trimming it. My installer said it wasn't even close to fitting. Had to cut off like 6" and reinforce it.

Do you have photos of it trimmed from behind the bumper?

puckshaw · 12-10-2014, 10:29 AM

Quote:

Originally Posted by cycy89

Do you have photos of it trimmed from behind the bumper?

Sorry no. I'm amazed the stock bumper fit without any trimming. I guess Sasha really carefully placed the components to fill every nook of the stock piece. The raptor must be laid out different enough that it causes lots of interference. Maybe the FI layout matches up better with stock and you'll get lucky. No way to know until you test fit it.

cycy89 · 12-10-2014, 10:35 AM

Quote:

Originally Posted by puckshaw

Sorry no. I'm amazed the stock bumper fit without any trimming. I guess Sasha really carefully placed the components to fill every nook of the stock piece. The raptor must be laid out different enough that it causes lots of interference. Maybe the FI layout matches up better with stock and you'll get lucky. No way to know until you test fit it.

With the stock set up you have to trim the crash bar I thought? Oh well we'll see!

12-10-2014, 10:11 AM	#5 (permalink)
puckshaw Track Member Join Date: Nov 2009 Location: Charlotte, NC Posts: 620 Drives: 09 PW 370Z Touring Rep Power: 18	Just got mine installed. Needs LOTS of trimming to fit the BP kit. cycy89 and Davectr like this. __________________ >>>>>BP Build Thread<<<<<

12-10-2014, 10:18 AM	#9 (permalink)
cycy89 A True Z Fanatic Join Date: Jun 2011 Location: 120mph somewhere Posts: 1,097 Drives: #TTURBOZ Rep Power: 31	Hopefully it will fit this https://vimeo.com/114144860 __________________ Fast Intentions Twin Turbo Kit GT2860RS, 677WHP\|FI 34 row oil cooler\|F.I. CBE\|Fast 500E return fuel system\|FI trans cooler\|FI billet aluminum flex plate\|Excedy clutch packs\|ENKEI RP03\|BC BR coilovers\|SEIBON Carbon\|EVO-R Rear fog light\|GTR push start\|Whiteline sway bars, Diff bushing\|DSS axles\|ECUTekW/FlexFuelTune

12-10-2014, 10:20 AM	#11 (permalink)
puckshaw Track Member Join Date: Nov 2009 Location: Charlotte, NC Posts: 620 Drives: 09 PW 370Z Touring Rep Power: 18	I'd say there's zero chance of fitting any inter cooler without trimming it. My installer said it wasn't even close to fitting. Had to cut off like 6" and reinforce it. __________________ >>>>>BP Build Thread<<<<<

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fujimara Rear Diffuser VS. EVO-R NEW Diffuser	KB2	Exterior & Interior	12	02-11-2014 08:03 PM
[FOR SALE] Carbon Signal Raptor Bumper	woodfolk1959	Parts for sale (Private Classifieds)	32	03-30-2012 02:04 PM
[FOR SALE] CS Raptor Front Bumper	Mozen	Parts for sale (Private Classifieds)	9	03-12-2012 07:42 PM

12-09-2014, 12:28 PM	#4 (permalink)
Donald@Carbonsignal Base Member Join Date: Mar 2013 Location: USA Posts: 234 Drives: xyZ cars Rep Power: 15	The black z has amuse style sides, the grey z has stock sides and fuji style side blades. Sent from my iPhone using Tapatalk