Cheap Tablet Mount

mults

The OBDII adapter was about $20 from ebay.

Now, as I promised, here are a few pics of my set up.

1) I cut another slot in the Nexus 7 case to match the one for the speaker.
2) You need (2) pieces of Velcro (1" x 23").
3) Slide the Velcro thru the Nexus case.
4) Open the cubby door and tighten the Velcro around the lid.
5) Close the lid.
5) Slide the tablet into the case and attach the power supply

I used the Nexus case because it is pliable enough to mold against the cubby door and still hold onto the tablet. The two pictures show the Torque Pro and Dash Command apps running.

Simple but very effective. I just need to route the power from inside the cubby to complete the mod. I used this setup during the 1300 miles of ZdayZ and the tablet did not move at all.

Attached Images

	IMG_20130703_175058_064.jpg (703.2 KB, 134 views)
	Modified Nexus 7 Cover 1.jpg (846.8 KB, 119 views)
	Velcro Thru Case.jpg (719.3 KB, 124 views)
	IMG_20130703_175304_344.jpg (722.4 KB, 134 views)
	IMG_20130703_175236_611.jpg (621.0 KB, 147 views)
	IMG_20130703_175405_420.jpg (677.5 KB, 127 views)

__________________
mults
40th Anniversary 'Z', 312.06HP/260.58TQ (Dynosty EcuTek Tune)
Build Date/Number: 1/27/2010 #706
Berk HFC + CBE, R2C CAI, Clear Bra, Cleveland Z Club