Now offering metra harness and rear speaker pods

peleincubus · 08-20-2013, 11:06 PM

Quote:

Originally Posted by bigaudiofanat

If your looking at not wanting to get a sub, I would recommend getting a higher end set of speakers like hertz or focal, they should provide enough bass to satisfy. Adding another set of budget speakers to the rear is not really going to help.

So do you think adding some hertz component in the front and hertz coaxial in the back would be a decent amount of bass?

If that were adequate I think I would prefer that over a sub/amp. I don't really like any of the pre fab sub enclosures. And when you start looking at custom you really really getting into too much money, especially if you are using nice equipment.

Also would it help with bass at all of you ran the four speakers off of an amp instead of the head unit, or would just clean up the sound more?

shayandude · 10-07-2012, 10:44 PM

This guy is a beast!
so hepful and so friendly!!!!

bigaudiofanat · 10-16-2012, 05:05 PM

Thanks man.

bigaudiofanat · 07-16-2013, 08:48 PM

Bump still offer these.

SemperWiFi · 08-19-2013, 10:47 AM

Quote:

Originally Posted by bigaudiofanat

After many PM's about both of these I have decided to offer them fully.

Rear speaker pods.
Standard will be build for a 6.5 inch coaxial speaker
Wrapped in standard speaker cloth.
Will need to ship me your rear panels for this process.
Turn around time? Between 1-2 weeks
Speaker wire is included
Please contact if you would like them fitted for a different size speaker.
Price: 200.00

Metra wiring harness
This process will add the wires directly to your metra harness so you can wire your Metra ASWC steering wheel controls direct. So no splicing or cutting your factory wires.

Just wires added 25 bucks "send harness to me"
NOTE this process is still expensive because I have to purchase pre existing metra harnesses and tear them down. Once I find a source in the states that sells the pins the price will drop.

Add 10 bucks and all your harnesses if you would like the wired up so it will be plug and play. "except ground"

As always you can check out my website for more pictures of any of my installs.
Bigaudiofanatic

ACK ELECTRONICS CATALOG
McMaster-Carr

Your welcome...

NismoZ70 · 08-19-2013, 02:15 PM

Quote:

Originally Posted by SemperWiFi

ACK ELECTRONICS CATALOG
McMaster-Carr

Your welcome...

What is the purpose of your post? It links to parts catalogs. What am I missing here?

Zteve · 08-19-2013, 03:24 PM

Quote:

Originally Posted by NismoZ70

What is the purpose of your post? It links to parts catalogs. What am I missing here?

links may help to provide a better service to the Z community

NismoZ70 · 08-19-2013, 04:10 PM

Quote:

Originally Posted by Zteve

links may help to provide a better service to the Z community

Please explain....

Zteve · 08-19-2013, 04:39 PM

Quote:

Originally Posted by NismoZ70

Please explain....

read the OP first post, that should explain it all. if not then there is nothing i can do for you

here is a hint:

Quote:

NOTE this process is still expensive because I have to purchase pre existing metra harnesses and tear them down. Once I find a source in the states that sells the pins the price will drop.

Cbtech · 08-21-2013, 06:06 PM

DUDE!! Effffff....had i know BAF was making the ASCW thingies i would have gone this route....now everything is cut up shite

lesper4 · 12-10-2013, 10:45 PM

Does the rear door panel still work for the books etc behind the passenger seat?

bigaudiofanat · 12-11-2013, 02:36 PM

Quote:

Originally Posted by lesper4

Does the rear door panel still work for the books etc behind the passenger seat?

No, the only way to get into it is to remove the panel.

lesper4 · 12-11-2013, 03:30 PM

In the picture the bottom panel is removed to make the pod (and put back) but the side is still in place, maybe it no longer opens (swings out)? One could just cut a larger opening so it is still usable?

bigaudiofanat · 12-11-2013, 03:33 PM

Quote:

Originally Posted by lesper4

In the picture the bottom panel is removed to make the pod (and put back) but the side is still in place, maybe it no longer opens (swings out)? One could just cut a larger opening so it is still usable?

No because than you would not have the space needed to mount the speaker.

lesper4 · 12-12-2013, 12:02 PM

In this picture you can clearly see there is a white book in the storage door. Does that door swing out at all or do you have to reach in? It still looks functional it would just be a matter of cut a larger opening if needed.

Quote:

Originally Posted by bigaudiofanat

10-16-2012, 05:05 PM	#3 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 855	Thanks man. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

07-16-2013, 08:48 PM	#4 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 855	Bump still offer these. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

08-21-2013, 06:06 PM	#10 (permalink)
Cbtech A True Z Fanatic Join Date: Feb 2013 Location: Sacramento, CA Posts: 1,372 Drives: 40th Anniversary Rep Power: 17	DUDE!! Effffff....had i know BAF was making the ASCW thingies i would have gone this route....now everything is cut up shite __________________ Are U in Sacramento or Central Valley California? Click here! Foglight Hardwire in less than 10 minutes! DIY: Automatic VDC off

12-10-2013, 10:45 PM	#11 (permalink)
lesper4 Base Member Join Date: Nov 2013 Location: S. California, Fontana Posts: 232 Drives: 14 370Z BaseCoupe PW Rep Power: 13	Does the rear door panel still work for the books etc behind the passenger seat? __________________ 2014 Nissan 370Z base coupe PW-m 2004 Mazda RX-8 grant touring VR-m (sold) 1992 Nissan 240SX/SE MG-m (sold)

12-11-2013, 03:30 PM	#13 (permalink)
lesper4 Base Member Join Date: Nov 2013 Location: S. California, Fontana Posts: 232 Drives: 14 370Z BaseCoupe PW Rep Power: 13	In the picture the bottom panel is removed to make the pod (and put back) but the side is still in place, maybe it no longer opens (swings out)? One could just cut a larger opening so it is still usable? __________________ 2014 Nissan 370Z base coupe PW-m 2004 Mazda RX-8 grant touring VR-m (sold) 1992 Nissan 240SX/SE MG-m (sold)

10-07-2012, 10:44 PM	#2 (permalink)
shayandude Base Member Join Date: Jun 2012 Location: louisiana Posts: 153 Drives: 07 350z, 09 pw 370z Rep Power: 15	This guy is a beast! so hepful and so friendly!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Rear fog light harness and switch	LukasC	Parts for sale (Private Classifieds)	12	04-24-2012 01:51 PM
Metra Wiring Harness	chemi19	Audio & Video	2	11-05-2010 10:38 PM
TWM Knob, Scosche Harness, Sony Head Unit, and Metra Single DIN Dash Kit	tbonesteak	Parts for sale (Private Classifieds)	9	09-27-2010 11:40 PM
Rear Fog Light/Harness...	Fly1 Motorsports	TheZStore	0	04-15-2010 07:01 PM
Rear Speaker/Sub Box	zero610	Audio & Video	19	05-29-2009 07:27 AM