Door Rattle Cure

Pat C.

So if you want to go to this extent, I can probably help talk you through pulling the regulator panel off to where you have access to the inside of the outer door skin and such.
Using the method my wife and I had figured out earlier in the winter you can deaden the entire exterior skin along with the bottom. For me, this is the only way. I think "slapping" the deadener on top of the reg. panel is a joke.
The only tricky part about pulling the panel off is, you have to drill out 2 rivets. These rivets hold the panel to the window tracks.
Putting the panels back on is just a little tricky, but not too bad. I've had mine back together now for a month or so and am not having any problems whenever I raise or lower the windows.
Send me a PM and I can give you some info; if you feel like going this route..
Probably not something you want to do in your friend's driveway to where you need to have completed in an afternoon...
Pat

RonRizz

I agree. you want to get in there and deaden that whole panel as well.
be cautious, because your cable runs up and down in the channel where the back of the rivet lies

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals