Custom center console slit for iPhone?

wdkwang · 09-15-2011, 05:42 PM

I'm always plugging in my iphone to the center console usb plug and then sticking the phone into the cup holder but then there are times i need to put a small drink or other chit into the cup holder so I was wondering how neat it'd be to have a custom slit next to the center console so you can just drop it in, set it, and forget it. Also, finished off with felt fabric as to not scratch up the phone

Even better would be having the ipod/iphone dock inside the slit so u can just directly plug them in without reaching for the cable.

XwChriswX · 09-15-2011, 05:43 PM

All this talk about slits is making me

But srsly, Daisuke was talking about this at some point, the side leg pads... having a pocket built into them... Maybe even being able to run cable into them so you slide it in and it's a dock right there... Would be kinda neat to see done nicely.

Super Moderator II · 09-15-2011, 06:03 PM

Here's another members posible solution

My DIY iPhone 4 car dock

XwChriswX · 09-15-2011, 06:06 PM

Not gonna lie, that's pretty wicked. Especially for base model guys... Touring or vert guys might not be able to enjoy it though. I think it would probably look better if you could find a black base to blend with the console a lot better...

esfourteen · 09-15-2011, 06:31 PM

I just use this

Padded Holder with Tilt Swivel and Pass-Through Connector for Cable Attachment*-*ProClip Car Mounts for Mobile Phones, GPS, and Handheld Devices

Cable tucks behind the stereo on the side and plugs into an ipod adapter for the bose unit.

wdkwang · 09-15-2011, 09:05 PM

Quote:

Originally Posted by Super Moderator II

Here's another members posible solution

My DIY iPhone 4 car dock

i've seen that thread before. he did an awesome job on that, but the touring model needs an alternative to that as to not lose the heated seats and extra switch.

i'm a bit anal about keeping things clean and minimalistic, so the Belkin and other phone docks to me tend to make it messy, especially with exposed wires.

so i guess when i have enough balls, i'll see if i can custom fabricate the pocket slit that i've envisioned in my head.

man all this talk about slits, anal, and balls....

AppleZ · 09-15-2011, 09:17 PM

Saw this in SkyMall when I was flying the other day. Was thinking about getting it. Simple.

Mobivalet Smartphone Holders | Auto & Hardware | SkyMall

SPOHN · 09-15-2011, 09:59 PM

Quote:

Originally Posted by esfourteen

I just use this

Padded Holder with Tilt Swivel and Pass-Through Connector for Cable Attachment*-*ProClip Car Mounts for Mobile Phones, GPS, and Handheld Devices

Cable tucks behind the stereo on the side and plugs into an ipod adapter for the bose unit.

Nice toes.

wdkwang · 09-15-2011, 10:25 PM

Quote:

Originally Posted by esfourteen

I just use this

Padded Holder with Tilt Swivel and Pass-Through Connector for Cable Attachment*-*ProClip Car Mounts for Mobile Phones, GPS, and Handheld Devices

Cable tucks behind the stereo on the side and plugs into an ipod adapter for the bose unit.

nice knob

370zFORme!! · 09-16-2011, 01:06 AM

Check this out. FLSHDOCKV2AV

wdkwang · 09-18-2011, 08:56 PM

Quote:

Originally Posted by AppleZ

Saw this in SkyMall when I was flying the other day. Was thinking about getting it. Simple.

Mobivalet Smartphone Holders | Auto & Hardware | SkyMall

i think this would a good, quick solution. thanks

slumpey · 09-20-2011, 11:37 AM

Quote:

Originally Posted by esfourteen

I just use this

Padded Holder with Tilt Swivel and Pass-Through Connector for Cable Attachment*-*ProClip Car Mounts for Mobile Phones, GPS, and Handheld Devices

Cable tucks behind the stereo on the side and plugs into an ipod adapter for the bose unit.

Is that the trance channel of DI.FM playing?

esfourteen · 09-20-2011, 11:42 AM

Quote:

Originally Posted by slumpey

Is that the trance channel of DI.FM playing?

indeed, I work for Digitally Imported

slumpey · 09-20-2011, 01:04 PM

Nice. Been listening for years. Best weekly shows are on there. Don't want to get off topic.

Quote:

Originally Posted by esfourteen

indeed, I work for Digitally Imported

09-15-2011, 05:42 PM	#1 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 20	Custom center console slit for iPhone? I'm always plugging in my iphone to the center console usb plug and then sticking the phone into the cup holder but then there are times i need to put a small drink or other chit into the cup holder so I was wondering how neat it'd be to have a custom slit next to the center console so you can just drop it in, set it, and forget it. Also, finished off with felt fabric as to not scratch up the phone Even better would be having the ipod/iphone dock inside the slit so u can just directly plug them in without reaching for the cable. __________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

09-15-2011, 05:43 PM	#2 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	All this talk about slits is making me But srsly, Daisuke was talking about this at some point, the side leg pads... having a pocket built into them... Maybe even being able to run cable into them so you slide it in and it's a dock right there... Would be kinda neat to see done nicely. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

09-15-2011, 06:03 PM	#3 (permalink)
Super Moderator II Super Moderator Join Date: Feb 2011 Location: Earth Posts: 379 Drives: a Spaceship Rep Power: 6264	Here's another members posible solution My DIY iPhone 4 car dock __________________

09-15-2011, 06:06 PM	#4 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	Not gonna lie, that's pretty wicked. Especially for base model guys... Touring or vert guys might not be able to enjoy it though. I think it would probably look better if you could find a black base to blend with the console a lot better... __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

09-15-2011, 06:31 PM	#5 (permalink)
esfourteen A True Z Fanatic Join Date: Mar 2010 Location: LI, NY Posts: 1,375 Drives: 40th TT Rep Power: 18	I just use this Padded Holder with Tilt Swivel and Pass-Through Connector for Cable Attachment-ProClip Car Mounts for Mobile Phones, GPS, and Handheld Devices Cable tucks behind the stereo on the side and plugs into an ipod adapter for the bose unit. __________________ Build Thread \| GTM TT Install Thread \| Engine Build Thread

09-15-2011, 09:17 PM	#7 (permalink)
AppleZ Base Member Join Date: Jul 2011 Location: Austin/Tampa Posts: 33 Drives: 2011 T/S Black 370z Rep Power: 13	Saw this in SkyMall when I was flying the other day. Was thinking about getting it. Simple. Mobivalet Smartphone Holders \| Auto & Hardware \| SkyMall

09-16-2011, 01:06 AM	#10 (permalink)
370zFORme!! Premium Member Join Date: Mar 2010 Location: SoCal Posts: 1,459 Drives: 2012 6MT STiffy Rep Power: 17	Check this out. FLSHDOCKV2AV __________________ 87' Honda Civic Hatchback: Kaput @ 288,000 miles, 90' Toyota Celica: Kaput @ 175,000 miles, 93' Mitsubishi 3000GT VR4: Kaput @ 138,000 miles, 06' Scion Tc: Traded in @ 64,000 miles, 10' Nissan 370z: Traded in @ 25,000 miles, 12' Subaru Impreza Sti: Current.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help: Removing center console	DinoJ	Exterior & Interior	6	06-13-2017 10:49 AM
Center Console Switches	Jeffblue	Audio & Video	4	09-14-2011 02:35 PM
Custom Touchscreen for Upper Center Console	Dee@Amplified	Video/Audio	31	02-25-2011 10:47 PM
Center console question.	gh0st3794	Exterior & Interior	1	02-19-2010 06:53 PM
Custom Upper Touchscreen for the Center Console	Dee@Amplified	Audio & Video	3	09-08-2009 09:32 AM