Originally Posted by tsolin01 Edit: Resetting the SRS error worked. Light's not staying on anymore and the camera works perfect! Maybe i can't read an appendix correctly...but i can't for
|
|
LinkBack | Thread Tools | Display Modes |
11-21-2010, 08:22 PM | #271 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: http://www.cfzclub.com/
Posts: 1,524
Drives: Angry
Rep Power: 19 |
Maybe i can't read an appendix correctly...but i can't for the life of me find the steps to reset SRS. Where did you find them? Only thing i can find is it says that if the light is blinking you must have your car serviced.
|
11-22-2010, 12:24 AM | #272 (permalink) |
Track Member
Join Date: Feb 2010
Location: Dallas, TX
Posts: 657
Drives: 2010 370Z
Rep Power: 16 |
Anyone else that has issues with the SRS light flashing after install cuz you turned the car on while the passenger airbag light was disconnected, can refer to the following thread on instructions to reset it:
How do you reset SRS????
__________________
SOLD 12/30/2011 2010 370Z Coupe Monterey Blue 6MT/Touring/Sport/Nav F.I. CBE CF w/ 12" Res | V1 | SecondSkin | Stillen G3 | EVO-R CF B-Pillars | Volk GT-S Ti Gunmetal 19x9.5 +30 F, 19x10.5 +8 R | Swift Spec-R Springs |
11-24-2010, 04:31 AM | #273 (permalink) |
Base Member
Join Date: Nov 2009
Location: UK
Posts: 65
Drives: 10 370Z 40th 7AT
Rep Power: 15 |
My kit arrived last night *whoop*. Got it installed straight away and all works perfect! I need to change the draw line numbers as I have installed the cam on the other side of the hatch release button as it left more space to get the license plate lights in and out and (on my car at least) meant the wire was closer to the grommet for the wiring harness back into the rear hatch. I think there are just some co-eff numbers I can swap over and it will flip the side of the car it thinks its on.
I am doing my sound deadening on Friday, so will be back with more pics of where and how I did stuff, feel free to add them to your how to if you like Brian. Be prepared for a few more orders from the UK when I post it up on our site too
__________________
370z Quartz Black Edition / 40th Anni 7AT (95 / 370) In the UK? Check out the UKs best 350z/370z specific club www.350z-uk.com / www.370z-uk.net |
11-24-2010, 07:10 AM | #274 (permalink) | |
Base Member
Join Date: Oct 2010
Location: NJ
Posts: 244
Drives: Nissan GT-R 2011
Rep Power: 15 |
Quote:
I thought about mounting on the other side. As you say it is a little easier but there were a couple of reasons I chose the other side. 1) At least on mine and Jeff's cars the clip where the cable could be routed was on right of the license plate lights (looking at the back of the car). 2) Also either way you want it as close to the center of the car to get the best image. 3) That was the side the Nissan's had them on and the basis for some of the donor settings. Not that I don't think that you cant change those and get it to work Note: With the full kits I trim the bracket so it fits. Was there holes behind the license plate? On the US cars there is and that makes routing/fishing fairly easy. With the UK/EU GT-Rs from what I've seen they are not there so you have to fish straight from the grommet to the license plate light. Let me know if you want some help with the numbers, you might just be able to change the offset to a negative. More pictures are always appreciated as in any input to improve the instructions. Like adding a section on installing on the other side. |
|
11-24-2010, 08:05 AM | #275 (permalink) |
Base Member
Join Date: Nov 2009
Location: UK
Posts: 65
Drives: 10 370Z 40th 7AT
Rep Power: 15 |
Ahh, ok that makes sense. On mine, yes the clips are on the right hand side of the light units also, so cables would be closer to the clip for feeding through. I thought it was a bit close to the clip to be able to get the bulb in and out if required. Also didnt realise that the left hand side was closer to the centre of the car. I can easily swap it over to that side if needs be though, no biggie.
With the license plate holes, I didnt take my plate off. I fed a bit of 2 core wire through the grommit and down to the floor, then made a "hook" out of the end and hooked it in the hole for the bulb holder. Taped the cam wire to that and pulled it all back through I'll have a play with the numbers, but may just move it over to the other side of the release button if the numbers are hard to work out. Keeps it easier to work with if we all have the cam in the same place I guess.
__________________
370z Quartz Black Edition / 40th Anni 7AT (95 / 370) In the UK? Check out the UKs best 350z/370z specific club www.350z-uk.com / www.370z-uk.net |
11-24-2010, 10:39 AM | #277 (permalink) |
Track Member
Join Date: Feb 2010
Location: Dallas, TX
Posts: 657
Drives: 2010 370Z
Rep Power: 16 |
Soooo when's this bypass kit coming out
__________________
SOLD 12/30/2011 2010 370Z Coupe Monterey Blue 6MT/Touring/Sport/Nav F.I. CBE CF w/ 12" Res | V1 | SecondSkin | Stillen G3 | EVO-R CF B-Pillars | Volk GT-S Ti Gunmetal 19x9.5 +30 F, 19x10.5 +8 R | Swift Spec-R Springs |
11-24-2010, 05:42 PM | #278 (permalink) |
A True Z Fanatic
Join Date: Jul 2010
Location: Virginia
Posts: 1,134
Drives: 2009 Touring Sp Nav
Rep Power: 17 |
09's are pending enough people answering the PM and sending their contact information. You will get a PayPal invoice when the buy is a go.
Group Buy/Interest - 2011 Rear View Camera
__________________
2014 Cayman S PDK Sport Chrono White/Black Was 2009 370Z Touring Sport+Nav 7AT Metallic Black/Persimmon Was 1991 NSX Auto Black/Black |
11-24-2010, 10:12 PM | #279 (permalink) |
A True Z Fanatic
Join Date: Oct 2010
Location: STL
Posts: 6,034
Drives: ONE BAD AZZ VERT
Rep Power: 30 |
__________________
*GTM* *INVIDIA* *MRWorks (RIP)* *Snow Performance* *Giken* *KW* *Hotchkis* *SRP* "Remember, when all else fails, don't forget to tongue punch the brown starfish"-dixon Dixon Cider's Roadster Build |
11-25-2010, 09:41 PM | #280 (permalink) |
A True Z Fanatic
Join Date: Sep 2009
Location: Mod Capital of Canada
Age: 57
Posts: 7,354
Drives: cars. lots of cars.
Rep Power: 40182 |
WOOT WOOT!
First backup camera kit to factory Nav head on a 2010 in Canada! Installed the system tonight in 2 hours and it works like advertised, no problems at all! Thanks guys! Great product and service
__________________
H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal |
11-26-2010, 12:30 PM | #282 (permalink) |
Base Member
Join Date: Oct 2010
Location: NJ
Posts: 244
Drives: Nissan GT-R 2011
Rep Power: 15 |
Jeff: Just a thought, but what about posting on the GT-R forum. I'm pretty sure that the 2009 NavTool solution for the 2009 370z is the same as the 2009/10 GT-R solution. If that is the case maybe I can drum up some group buy interest from 2009/10 GT-R owners? That way we can get to the required numbers and help the 2009 owners out.
|
11-26-2010, 05:29 PM | #283 (permalink) | |
Track Member
|
Quote:
Frank |
|
11-27-2010, 02:50 AM | #285 (permalink) |
A True Z Fanatic
Join Date: Oct 2010
Location: STL
Posts: 6,034
Drives: ONE BAD AZZ VERT
Rep Power: 30 |
Awesome job guys!
__________________
*GTM* *INVIDIA* *MRWorks (RIP)* *Snow Performance* *Giken* *KW* *Hotchkis* *SRP* "Remember, when all else fails, don't forget to tongue punch the brown starfish"-dixon Dixon Cider's Roadster Build |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear View Camera | bigaudiofanat | Audio & Video | 15 | 10-29-2010 04:25 PM |
Factory rear view camera part number? | ducky | Exterior & Interior | 2 | 02-06-2010 12:32 AM |
Rear View Camera question | ljstella | Audio & Video | 4 | 11-17-2009 02:45 PM |
Anyone interested in the JDM rear view camera and all other JDM parts N/A in the US? | 370ZBLACK09 | Exterior & Interior | 15 | 10-26-2009 03:19 PM |
Rear View Camera: The Lazy Man's Blind Spot Fix | speed_BMW330i | Nissan 370Z General Discussions | 5 | 06-23-2009 08:41 PM |