03-21-2017, 12:53 AM
|
#24 (permalink)
|
|
Base Member
Join Date: Oct 2016
Location: Las Vegas, NV
Posts: 49
Drives: 2016 370Z BC A7
Rep Power: 9
|
Replacement door regulator may creat new issues
Quote:
Originally Posted by scope22
I had the same issue....but i will say that the door hasn't been quite the same since, at first door glass was off, took the car back and they fixed it but just doesn't seem right, so be warned it seems that they have to re-adjust the glass and chances are its not going to be 100% the same way as it was from factory.
|
I had this work done at my local dealership and in my situation the glass was way off in positioning afterwards as well. So far off that it was distorting my window rubber seal. The 2nd attempt was good but then clips and other things were damaged & another trip was needed. I also agree that 100% same functionality may not be possible as it was assembled at the factory but mine is totally acceptable again now. OR... Maybe this techs at the dealerships just rush the jobs and just don't pay attention to detail like they should! 
I did have to do a Window Reset myself later on. The glass was failing to lower very intermittently. That's been OK since the reset. 
|
|
|
Similar Threads
26Likes
Threaded Mode
