cheap amazon spacers

wanker · 08-21-2015, 03:56 PM

Quote:

Originally Posted by Jayhovah

Follow up on this... 1 year and 10k miles later, I took off all four wheels to inspect the spacers. All four look to be in good shape, and all the nuts were holding their 100 ft/lb of torque. So far so good!

IMHO, 100 ft/lbs is overkill and could potentially crack the spacer or strip the nut. 80-85 ft/lbs is fine. Regardless, the key with any spacer installation is to torque the nuts evenly.

gotchu99 · 08-22-2015, 01:12 PM

I have these for my base rims that I decided to throw back on (needed new tires and these had brand neww ones). If you have a mild drop, 25f and 20r puts them flush. I'm liking the old style base rims, the simple finned design suits the car well.

Shindigs · 09-24-2015, 07:14 PM

Quote:

Originally Posted by Jayhovah

Follow up on this... 1 year and 10k miles later, I took off all four wheels to inspect the spacers. All four look to be in good shape, and all the nuts were holding their 100 ft/lb of torque. So far so good!

Thanks for the vote of confidence. I just ordered a pair in 20 mm and another in 25 mm.

I'm usually very willing to spend more for quality, but this is such a simple part honestly, and your experience pushed me over the edge to give it a shot. Besides, I just installed a full AL Priority 4 head laser jammer system with the Beltronics STIR radar detector head and HiFi speaker... that has drained my car budget considerably.

kenchan · 09-25-2015, 06:27 PM

Cheap and spacer should not be in the same sentence..

jcosta79 · 10-08-2015, 03:38 PM

I would spend the extra money and get a spacer with extended studs.

vividracing · 10-08-2015, 04:06 PM

Are anyone's Amazon spacers being delivered by drone?

Brendan · 10-08-2015, 09:51 PM

I have amazon spacers that I use in the winter. They are made of metal and allow my wheels to stick out more. I have not had issues with them and neither did the hundreds of people the left positive reviews. If I die I'll let you guys know.

Jayhovah · 01-18-2016, 12:19 PM

Lost my 2011 Z just before the holiday (NOT BECAUSE OF THE SPACERS!!!).. for my new (to me) 2013 I am putting on Garageline spacers because they are anodized black (sweeeeet), guarantee the grade of the bolts, and are on sale at a price only slightly more expensive than the generic ones I had before.

carlitos_370z · 01-18-2016, 12:51 PM

Quote:

Originally Posted by chops

not sure if id trust cheap bolt on spacers to be honest...sounds like a recipe for disaster. if youre using quality extended studs (ARP, NISMO) and go with cheap spacers, thats fine. but going with cheap bolton spacers will leave your car looking like this

WARNING - Aluminium Wheel spacers - GT-R Register - Official Nissan Skyline and GTR Owners Club forum
Wheel studs on wheel spacers broke off into Lugs nuts - Club Lexus Forums
Don't trust Akata 10 mm spacers - AcuraZine Community
This what happens when you cheap out on wheel spacers. - Honda Accord Forum : V6 Performance Accord Forums

positive camber anyone???

i hope this dont happen to me never...

Quote:

Originally Posted by Jayhovah

Lost my 2011 Z just before the holiday (NOT BECAUSE OF THE SPACERS!!!).. for my new (to me) 2013 I am putting on Garageline spacers because they are anodized black (sweeeeet), guarantee the grade of the bolts, and are on sale at a price only slightly more expensive than the generic ones I had before.

I use the Z1 motorsport 20mm bolt-on spacers in the rear and so far so good! great quality and not to expensive!

Felix 808 · 01-18-2016, 02:06 PM

Quote:

Originally Posted by chops

not sure if id trust cheap bolt on spacers to be honest...sounds like a recipe for disaster. if youre using quality extended studs (ARP, NISMO) and go with cheap spacers, thats fine. but going with cheap bolton spacers will leave your car looking like this

WARNING - Aluminium Wheel spacers - GT-R Register - Official Nissan Skyline and GTR Owners Club forum
Wheel studs on wheel spacers broke off into Lugs nuts - Club Lexus Forums
Don't trust Akata 10 mm spacers - AcuraZine Community
This what happens when you cheap out on wheel spacers. - Honda Accord Forum : V6 Performance Accord Forums

This is just another example of an instance you can not afford to be cheap. Personally I would never use a bolt on spacer because you could shear a stud on the inside & never know it.

YMMV

synolimit · 01-19-2016, 08:11 AM

I prefer bolt on as you're not using a super long stud if you use a large spacer. I'd rather have short and fat as a base than long and skinny.

What hasn't be mentioned is the material. I've seen the actual spacer crack before but what's worse is using poor stud material! Do these cheap spacers even have a number on the back of the stud? My Z1's had no number which worried me. My new bolt on's are 10.9 grade and my stud to wheel studs are 190,000 psi ARP studs. The insides are red locktite down to 90 or 100psi. Wheel to spacer is 85-90psi. Being hubcentric everything should be fine as all the weights on the hub and not the spacers.

Brendan · 01-19-2016, 08:19 AM

Quote:

Originally Posted by synolimit

I prefer bolt on as you're not using a super long stud if you use a large spacer. I'd rather have short and fat as a base than long and skinny.

What hasn't be mentioned is the material. I've seen the actual spacer crack before but what's worse is using poor stud material! Do these cheap spacers even have a number on the back of the stud? My Z1's had no number which worried me. My new bolt on's are 10.9 grade and my stud to wheel studs are 190,000 psi ARP studs. The insides are red locktite down to 90 or 100psi. Wheel to spacer is 85-90psi. Being hubcentric everything should be fine as all the weights on the hub and not the spacers.

This is a good post. The hustle with a lot of consumer products is to charge a lot and hopefully people will assume quality. Its frustrating how little talk there is of how to discern quality even on forums for enthusiast for a subject. I wish I had taken the time to try and educate rather resort to cynicism and sarcasm.

Jayhovah · 01-22-2016, 11:00 AM

My garage line spacers showed up with grade 10.9 studs. They also look really nice with the black anodized finish. Just and FYI.

kenchan · 01-22-2016, 11:15 AM

i keep checking in here thinking something bad happened.. lol

Shindigs · 01-22-2016, 11:16 AM

Haha mine are still going strong. Checked the torque on them and they were perfect. will let you know if that changes *knock on wood*

09-25-2015, 06:27 PM	#19 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	Cheap and spacer should not be in the same sentence.. vividracing, PEPI and wideglideleon like this.

10-08-2015, 03:38 PM	#20 (permalink)
jcosta79 A True Z Fanatic Join Date: Jul 2012 Location: N/A Posts: 1,430 Drives: N/A Rep Power: 14	I would spend the extra money and get a spacer with extended studs. __________________ 2012 PW NISMO #0559 - GT Spec Brace Kit - Swift Springs - ARK TP & Invidia CBE K&N Intake - UpRev Tune - 15mm Z1 Spacers & Studs - StopTech Slotted Rotors & SS Lines - ZSpeed CMAK with Stage 2 Clutch and Lightweight Flywheel

10-08-2015, 04:06 PM	#21 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 37 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 38	Are anyone's Amazon spacers being delivered by drone? Venom13132 likes this. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

10-08-2015, 09:51 PM	#22 (permalink)
Brendan Track Member Join Date: Apr 2013 Location: Colorado Posts: 626 Drives: Poor man's Porsche Rep Power: 541	I have amazon spacers that I use in the winter. They are made of metal and allow my wheels to stick out more. I have not had issues with them and neither did the hundreds of people the left positive reviews. If I die I'll let you guys know. Jayhovah, Venom13132 and wideglideleon like this.

01-19-2016, 08:11 AM	#26 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	I prefer bolt on as you're not using a super long stud if you use a large spacer. I'd rather have short and fat as a base than long and skinny. What hasn't be mentioned is the material. I've seen the actual spacer crack before but what's worse is using poor stud material! Do these cheap spacers even have a number on the back of the stud? My Z1's had no number which worried me. My new bolt on's are 10.9 grade and my stud to wheel studs are 190,000 psi ARP studs. The insides are red locktite down to 90 or 100psi. Wheel to spacer is 85-90psi. Being hubcentric everything should be fine as all the weights on the hub and not the spacers. carlitos_370z likes this. __________________ 13 370z-

08-22-2015, 01:12 PM	#17 (permalink)
gotchu99 Base Member Join Date: Feb 2011 Location: ny Posts: 86 Drives: '09 370z black mt, Rep Power: 14	I have these for my base rims that I decided to throw back on (needed new tires and these had brand neww ones). If you have a mild drop, 25f and 20r puts them flush. I'm liking the old style base rims, the simple finned design suits the car well.

01-22-2016, 11:15 AM	#29 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	i keep checking in here thinking something bad happened.. lol

01-22-2016, 11:16 AM	#30 (permalink)
Shindigs Base Member Join Date: May 2015 Location: DFW, TX Posts: 20 Drives: 2010 370Z 40th Anniv Rep Power: 9	Haha mine are still going strong. Checked the torque on them and they were perfect. will let you know if that changes knock on wood

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Two Amazon Gift Cards	SS_Firehawk	Misc Items for sale (No Z stuff)	3	01-15-2014 09:33 PM
[WTB] 5mm Ichiba spacers CHEAP!	Scion	Parts for sale (Private Classifieds)	0	01-15-2012 02:47 AM
Found K&N Panel Filters cheap on Amazon	BalanBro	Nissan 370Z General Discussions	11	04-09-2011 08:10 PM
Amazon WebPay	sylenze	Parts for sale (Private Classifieds)	0	03-10-2011 10:23 AM
Amazon has Purolator Oil Filters in packs of 2 super cheap...	09370z	Nissan 370Z General Discussions	2	07-17-2009 06:18 PM