Changing wheels this weekend.

Zbrah

Is this a serious thread or you're just bragging? Cuz I'm super jealous, I want new wheels

cooltoy

Both.

It gives me a smooth segue to post pics after I am done changing the wheels.

__________________

DEpointfive0

Get a real jack. The scissor jack will cause nothing but trouble

__________________
Do YOU want to know what/where I got my username from?

dP3NGU1N

Not to derail but I read a thread that says we should also swap out lugs when swapping to aftermarket wheels. Is this a requirement? I ask because I recently got new wheels as well and don't want to watch them rolling away as my car teeters.

The information was in a thread that recently got stickied.

__________________

35% Hooper Optik | Takeda Attack CAI | F.I. HFC | Hotchkis Sway Bar | Stillen 24row | OS Giken Super Lock LSD | TK Shift Knob | EVO-R Carbon Diffuser

cooltoy

Aftermarket wheel lugs are different from stock lugs. Definitely need new ones and hubsentric rings.

__________________

dP3NGU1N

WOW sorry! I'm so sleepy right now... I didn't mean lugs. I was actually wondering if you need to swap out the stock studs for extended studs.

Sorry about the confusion.

__________________

35% Hooper Optik | Takeda Attack CAI | F.I. HFC | Hotchkis Sway Bar | Stillen 24row | OS Giken Super Lock LSD | TK Shift Knob | EVO-R Carbon Diffuser

cooltoy

I don't think so. If you are not using spacers, I don't see why. But I am not sure.

__________________

dP3NGU1N

I didn't think so either until I read that sticky. Confused me more than anything and made me a bit paranoid.

Anyway. I agree with everyone else. Get a proper jack and stands, they're not that expensive and they should last for years.

__________________

35% Hooper Optik | Takeda Attack CAI | F.I. HFC | Hotchkis Sway Bar | Stillen 24row | OS Giken Super Lock LSD | TK Shift Knob | EVO-R Carbon Diffuser

Read T

Sorry it confused you.

__________________
2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars
SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

kenchan

you shouldnt need longer studs if you are not using spacers.

make sure you get the acorn type (tapered) lug nuts for your aftermarket wheels.
i personally run muteki's forged steel ones on my aftermarket wheels.

the duraluminum ones can only handle like 80ft/lbs. they strip pretty easily if
you over torque.

i also dont use impact guns when im working on my expensive wheels. only hand
tools and a power driver on low torque setting.

Read T

Depending on the wheels you get you may need longer studs to properly engage the threads on the lug nuts. The mating surface of the OEM wheels (the part of the wheel between the hub and lug nut) is much thinner than that of most aftermarket wheels, thus decreasing the protrusion of most studs when you use aftermarket wheels. For me this meant that unless I put on longer studs, I would only get about 4 threads engaging in my new lug nuts (and for m12x1.25 studs you should have at least 6 threads engaging). You don't have to run longer studs, but I'd rather be safe than have my wheels rolling down the road and my car resting on the brake rotors.

Also if you're running open ended lug nuts and go to a track event, you will not pass tech unless the studs are at least flush with the top of the lug nuts.

__________________
2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars
SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

Read T

Just made a quick illustration. The distance in red is much larger on most aftermarket wheels I have test fit on my Z, which required me to get longer studs to fit aftermarket wheels.

__________________
2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars
SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

dP3NGU1N

Hmm. Good to know. I'll give it another look.

__________________

35% Hooper Optik | Takeda Attack CAI | F.I. HFC | Hotchkis Sway Bar | Stillen 24row | OS Giken Super Lock LSD | TK Shift Knob | EVO-R Carbon Diffuser

kenchan

as long as you can get more than 10mm of thread, you're fine. that's the minimum of most forged lugs.

Read T

Yeah, I just am paranoid and don't like something at the 'minimum' I guess

__________________
2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars
SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS