Help: Tire recommendations for new 19x10.5" square for DD use and tire rotation

chops

no need to go above 9.5" wheel if you're going with 285 square?

but you wouldnt run a 285 wide tire on a 10.5" wheel? but above you said you shouldnt go above 9.5" wheel on 285....you're advice is conflicting

synolimit

Yeah. What's confusing? If your doing 285 tires there's NO need to use a 10" or 10.5" wheel. There's NO need to go above a 9.5" when a 9.5" wheel will be perfect. Not only is there no need, you shouldn't.


Correct. A 10.5" wheel is to much for a 285 tire in my book. Again correct. You shouldn't go above a 9.5" wheel if you're using a 285.

You drunk? High? Or just trying to be confusing to yourself?

__________________
13 370z-

cv129

Just wanna say, one thing everybody is forgetting here...stretchness of the tire is a function of both width AND sidewall height. 275/40 on a 10.5 wheel is less stretched than 275/35 on the same wheel.

__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield

fuct

your book is screwy...

so Nissan is stupid for running a 285/35 on the rear nismo rims?

synolimit

Yes. Same with the -0.5 to zero front camber and -2 rear. Car handles like **** compared to a correct alignment.

__________________
13 370z-

zeeder

What's a correct alignment?

__________________
Zack
FI catback, HFC, and Start Button - Z1 Intake - Nismo S-Tune Spoiler - PasswordJDM V2 Shift Knob

fuct

my nismo didnt come with a -2 degree rear camber. it was -1.4/-1.6 from the factory (AFTER A 1" DROP IM -2)


where are you getting your info? the same tire book?

synolimit

Correct per spec or correct for being correct?




How would you know your factory camber? Who aligns a new car? Most people do a before and after but the before already has the lowering springs on so that doesn't count. There's no way with OEM everything your front was that low, you'd be out if spec per nissan. Spec is -1.4 to +0.1.

Every car is different. Spec is -2.2 to -1.2 rear but it will always be more rear from nissan which is retarded, like a 285 on a 10.5.

Any book in the world. Ask one people on this forum if they think rear camber should be more than the front. You almost ALWAYS want -1 more in the front. For the track I plan on -3 front and -1.8 rear. For a good handling street car would be -2.5 to -2.0 front -1.5 rear.

__________________
13 370z-

fuct

i had to get new tires shortly after purchase so i had it alighned for sh1ts and giggles.

and i never said anything about my front camber settings. i was strictly talking about the rear


OEM i was within spec. (id hope so!)

after a 1" drop im at front: -1.7 rear: -2 (no camber kit used)

a 285 on a 10.5" rim isnt retarded......