USW Forged Crossover on my 370Z

ZeeRedZ · 09-18-2013, 04:39 PM

Quote:

Originally Posted by Volk Z

I'm glad I could help, I like them as they look much different then the normal wheel on a 370z. The split spoke is a great complimentary design for the 370z.

The offsets look great! Did you go 9.5 width with a +15 front or +22? The rear looks like either 10.5 width +0 or 11 width +10?
Also what tires sizes did you go with? The front looks a little stretched... 245 width up front?

-Chad

I did exactly as you advised Chad as follows: "I would recommend going with the following width and offset 20x9.5+15 (tire 255-30-20) and 20x11+10 (tire 305-25-20)." They are Hankook Ventus V12 Evo K110. I plan on dropping the front a little more to look like the rear. Can't tell you how many folks at HIN like the Crossover and the setup. They loved the 11" rears big time! LOL
Thanks again for all of your expert help.
Doc

Volk Z · 09-18-2013, 10:11 PM

Quote:

Originally Posted by ZeeRedZ

I did exactly as you advised Chad as follows: "I would recommend going with the following width and offset 20x9.5+15 (tire 255-30-20) and 20x11+10 (tire 305-25-20)." They are Hankook Ventus V12 Evo K110. I plan on dropping the front a little more to look like the rear. Can't tell you how many folks at HIN like the Crossover and the setup. They loved the 11" rears big time! LOL
Thanks again for all of your expert help.
Doc

Beautiful!

I would either lower the front a half inch or get a front lip... If your brave do both. The stillen front lip would work nice for your set up.... Inexpensive and easy to install

Ok after looking at the car here is what I would do to make it POP.
Stillen front lip
Black out headlight housing (MRworks or one-eighty)
Vinyl wrap roof in matte black and do mirrors in black as well.
Color match the door handles
Cost to do all around 1000 bucks give or take

ZeeRedZ · 09-19-2013, 12:49 PM

Quote:

Originally Posted by Volk Z

Beautiful!

I would either lower the front a half inch or get a front lip... If your brave do both. The stillen front lip would work nice for your set up.... Inexpensive and easy to install

Ok after looking at the car here is what I would do to make it POP.
Stillen front lip
Black out headlight housing (MRworks or one-eighty)
Vinyl wrap roof in matte black and do mirrors in black as well.
Color match the door handles
Cost to do all around 1000 bucks give or take

Chad, you read my mind like a book because that is exaclty what I am planing to do. LOL

Volk Z · 09-19-2013, 02:43 PM

Quote:

Originally Posted by ZeeRedZ

Chad, you read my mind like a book because that is exaclty what I am planing to do. LOL

I'm excited to see it then! The black add ons will bring out the black in the wheel nicely.
Keep me posted on the progress!

You can see in my old 350z in the pic below, as you add more colors or carbon fiber on a car it allows more contrast which then makes the car POP more

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best way to mount crossover in kickpanel	rscott	Audio & Video	6	12-02-2012 07:58 PM
Component Speakers - Where does the Crossover go??	Fatalsports	Audio & Video	7	05-05-2011 01:42 AM
Adjusting crossover	Baer383	Audio & Video	4	03-04-2011 10:14 AM
Crossover Help	zero610	Audio & Video	17	06-27-2009 06:29 PM
Crossover Settings?	bpd138	Audio & Video	4	05-30-2009 02:12 PM