Component Speakers - Where does the Crossover go??

Fatalsports · 05-04-2011, 09:33 AM

Quick question as I'm going to start my audio install over the weekend. I purchased the Polk DB6501 Component speakers...my question is where does the actual Crossover go?

Do you mount it somewhere (under the seat???In the door speaker hole???)
Pics would be greatly appreciated!!

kenchan · 05-04-2011, 10:01 AM

if i was to do it, i would wire up new wires directly from the HU to the side kickpanel under the dash. (driver side above fuse box, passenger side lower right of glove box) from there split the tweeter and woofer wires.

also check out what 90ST and Big recommends as they've actuallly done the install.

ill do mine when im ready to swap out the HU in a yr or so.

cptspeed · 05-04-2011, 10:05 AM

I mounted mine under the cross brace beside my new amp.

TreeSemdyZee · 05-04-2011, 10:23 AM

Kick panels on both sides. Easy place to mount them and easy access in case you want to change the connections (mine has 3 different connections).

Astrosfan · 05-04-2011, 11:49 AM

i just shoved mine in the kick panels, no mounting.

kenchan · 05-04-2011, 11:59 AM

yah, i would use mounting tape or zip tie to another harness or anywhere that i can loop it. i dont think screwing it onto the metal panel is necessary either.

chops · 05-04-2011, 04:15 PM

Quote:

Originally Posted by kenchan

if i was to do it, i would wire up new wires directly from the HU to the side kickpanel under the dash. (driver side above fuse box, passenger side lower right of glove box) from there split the tweeter and woofer wires.

also check out what 90ST and Big recommends as they've actuallly done the install.

ill do mine when im ready to swap out the HU in a yr or so.

that is almost exactly where i put mine. i hid my crossover right beneath the kickpanel (below the fuse box). fits perfectly, and easily accessible if i need to make any changes

90 ST · 05-05-2011, 01:42 AM

Yep, kicks if they will fit, these should.

05-04-2011, 09:33 AM	#1 (permalink)
Fatalsports Base Member Join Date: Apr 2011 Location: Urbana, MD Age: 40 Posts: 116 Drives: 2010 370Z Roadster Rep Power: 13	Component Speakers - Where does the Crossover go?? Quick question as I'm going to start my audio install over the weekend. I purchased the Polk DB6501 Component speakers...my question is where does the actual Crossover go? Do you mount it somewhere (under the seat???In the door speaker hole???) Pics would be greatly appreciated!!

05-04-2011, 10:05 AM	#3 (permalink)
cptspeed Track Member Join Date: Jul 2009 Location: tampa Posts: 799 Drives: 09 370z Rep Power: 16	I mounted mine under the cross brace beside my new amp. __________________ FI CBE, 20" forged specialties rims, swift springs, boston subs, kicker amp, focal components

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JL Audio ZR570-CSi vs Focal K2 Power K130KR Component Speakers	pumadaman	Audio & Video	5	11-13-2010 10:51 PM
Front 6.5 component speakers Brands - Hertz	37Z	Audio & Video	9	05-12-2010 09:07 PM
Polk MM6501 or Kenwood KFCP708 6 3/4 Component Speakers?	DarkZ	Audio & Video	6	05-12-2010 06:52 PM
Stock crossover location for front speakers	Lost	Audio & Video	17	09-17-2009 07:01 PM
Crossover Help	zero610	Audio & Video	17	06-27-2009 06:29 PM

05-04-2011, 10:01 AM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	if i was to do it, i would wire up new wires directly from the HU to the side kickpanel under the dash. (driver side above fuse box, passenger side lower right of glove box) from there split the tweeter and woofer wires. also check out what 90ST and Big recommends as they've actuallly done the install. ill do mine when im ready to swap out the HU in a yr or so.

05-04-2011, 10:23 AM	#4 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 59 Posts: 4,875 Drives: '09 370 & ‘14 Juke Rep Power: 27408	Kick panels on both sides. Easy place to mount them and easy access in case you want to change the connections (mine has 3 different connections).

05-04-2011, 11:49 AM	#5 (permalink)
Astrosfan Enthusiast Member Join Date: Jan 2010 Location: houston, TX Posts: 427 Drives: 09 370z PG Sport Rep Power: 15	i just shoved mine in the kick panels, no mounting.

05-04-2011, 11:59 AM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	yah, i would use mounting tape or zip tie to another harness or anywhere that i can loop it. i dont think screwing it onto the metal panel is necessary either.

05-05-2011, 01:42 AM	#8 (permalink)
90 ST A True Z Fanatic Join Date: May 2010 Location: Calgary Posts: 1,861 Drives: 90 and 15 GMC Sierra Rep Power: 420	Yep, kicks if they will fit, these should.