Any issues running 20X10 in the front and 20X11 in the back?

cooltoy · 09-16-2013, 11:56 AM

Or is it better to run 20X9 in the front and 20X11 in the back?
Thank you.

ZeeRedZ · 09-18-2013, 07:25 PM

Quote:

Originally Posted by cooltoy

Or is it better to run 20X9 in the front and 20X11 in the back?
Thank you.

I am running the 20x9.5 +15 and 20x11 +10 on my 370Z. See USW Forged Crossover for info and great advice by Volk Z on this forum!

cooltoy · 09-18-2013, 07:47 PM

Thanks. The wheels I am looking at, only come either in 9 or 10.

I was actually told that the offset I was considering (+45) will hit strut/calipers. Any lower offset will probably stick out too far on the fender side. I guess I will probably have to go with 9's.

Kingbaby · 09-18-2013, 07:52 PM

pics of wheel...

cooltoy · 09-18-2013, 08:44 PM

Its a secret.

I guess I should add that the offset for the 20x10 would be +45 and staying stock height.

Liquid_G · 09-19-2013, 06:34 AM

Rohannas are horrible. You can do so much better. And 20's on stock height us going to look redonkulous. Just sayin.

cooltoy · 09-19-2013, 08:07 AM

Please expand on "horrible".

I was told that that the quality would be similar as Vossen (as far as the forging process).

fuct · 09-19-2013, 10:55 AM

Webster defines horrible as::: rolling on 20" rims with the stock suspension.

jk

cooltoy · 09-19-2013, 12:34 PM

If that's the only definition, I can live with that.

Liquid_G · 09-19-2013, 08:30 PM

Quote:

Originally Posted by cooltoy

Please expand on "horrible".

I was told that that the quality would be similar as Vossen (as far as the forging process).

I'd really love to hear a source on that.. Rohana are cheap made in taiwan garbage. I really am not sure if they are forged, but the parent company of rohana is a ghetto tuning shop here in chicago called TopSpeed. They are the place to go if you want knock off junk parts for your civic or integra.

I swear i'm not trying to bash you, just saying you should really look at other options before settling on those.

cooltoy · 09-19-2013, 08:55 PM

I understand that you are not bashing me. I did not take it that way. I appreciate the input. That's why I am asking. GetYourWheels was one source and another shop I talked to was the other. If you have some good reasons for me to stay away, I am here to listen.

From what I been able to research both are low pressure cast and both are made in Taiwan. The Vossens are slightly heavier. I don't track. I don't do shows. So I am not looking for the lightest, most expensive wheel in the world. Just looking for a certain look.

I had RS Limited Mase on my Celica for 12 years, which I believe is even cheaper made then the two above mentioned wheels, and I did not have a single issue with them. I liked how they looked.

Kingbaby · 09-20-2013, 01:37 AM

the wheel design is your choice of course...but that offset is silly

zilverbullet · 09-23-2013, 02:50 PM

Also curious about the fitment of 20x10 in the front.

I am looking at getting a squared setup of 20x10.5 +25. Any one have experience with these specs?

09-16-2013, 11:56 AM	#1 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,942 Drives: 14 PW 370Z S/T MT Rep Power: 240365	Any issues running 20X10 in the front and 20X11 in the back? Or is it better to run 20X9 in the front and 20X11 in the back? Thank you.

09-18-2013, 08:44 PM	#5 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,942 Drives: 14 PW 370Z S/T MT Rep Power: 240365	Its a secret. I guess I should add that the offset for the 20x10 would be +45 and staying stock height. Last edited by cooltoy; 09-18-2013 at 08:47 PM.

09-19-2013, 06:34 AM	#6 (permalink)
Liquid_G A True Z Fanatic Join Date: Aug 2009 Location: Chicago Burbs Posts: 1,439 Drives: 09 370z Supercharged Rep Power: 43	Rohannas are horrible. You can do so much better. And 20's on stock height us going to look redonkulous. Just sayin. OMGWTFBBQ likes this. __________________

09-19-2013, 08:55 PM	#11 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,942 Drives: 14 PW 370Z S/T MT Rep Power: 240365	I understand that you are not bashing me. I did not take it that way. I appreciate the input. That's why I am asking. GetYourWheels was one source and another shop I talked to was the other. If you have some good reasons for me to stay away, I am here to listen. From what I been able to research both are low pressure cast and both are made in Taiwan. The Vossens are slightly heavier. I don't track. I don't do shows. So I am not looking for the lightest, most expensive wheel in the world. Just looking for a certain look. I had RS Limited Mase on my Celica for 12 years, which I believe is even cheaper made then the two above mentioned wheels, and I did not have a single issue with them. I liked how they looked. Last edited by cooltoy; 09-20-2013 at 12:30 PM.

09-23-2013, 02:50 PM	#13 (permalink)
zilverbullet Track Member Join Date: Mar 2013 Location: Bay Area, CA Posts: 668 Drives: a silver bullet Rep Power: 15	Also curious about the fitment of 20x10 in the front. I am looking at getting a squared setup of 20x10.5 +25. Any one have experience with these specs? __________________ '13 & Infinity Swifts Z1 Post-MAF F.I. NST *VARIS* Tommy Kaira AeroJacket MotorDyne

09-18-2013, 07:47 PM	#3 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,942 Drives: 14 PW 370Z S/T MT Rep Power: 240365	Thanks. The wheels I am looking at, only come either in 9 or 10. I was actually told that the offset I was considering (+45) will hit strut/calipers. Any lower offset will probably stick out too far on the fender side. I guess I will probably have to go with 9's.

09-19-2013, 08:07 AM	#7 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,942 Drives: 14 PW 370Z S/T MT Rep Power: 240365	Please expand on "horrible". I was told that that the quality would be similar as Vossen (as far as the forging process).

09-19-2013, 10:55 AM	#8 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 23	Webster defines horrible as::: rolling on 20" rims with the stock suspension. jk

09-19-2013, 12:34 PM	#9 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,942 Drives: 14 PW 370Z S/T MT Rep Power: 240365	If that's the only definition, I can live with that.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fitment question. 20x10 +25 front, 20x11 +15 or +20 rear.	BLKGST	Wheels & Tires	8	06-19-2013 10:11 PM
quick question (20x10 in the front with a 20x13 in the back?)	captain-nok	Wheels & Tires	7	02-23-2012 09:07 PM
[FOR SALE] SSR Professor SP3!!! (20x10 - 20x11) New! SoCaL Only	Juruki	Parts for sale (Private Classifieds)	34	02-19-2012 03:36 PM
I will Be back and running, WOOHOO!!!!	Chris_1	Wheels & Tires	2	03-14-2011 10:31 AM
Volk G2 in stock! 20x10 and 20x11 in Flat Black and High Metal Bronze!	Ryan@IP	Tires/Wheels	6	07-30-2009 09:33 AM