Will this fit? Swifts, spacers, 265/305 re11's

Unique_Z · 02-23-2013, 04:20 PM

Quote:

Originally Posted by Alan_2010

I actually checked your setup out Iwan, I like the looks of it a lot. The thing on the RE11's is the sidewall is so stiff that it doesn't really bubble out and the 305 fits quite similar to the 285

Quote:

Originally Posted by Alan_2010

Also with the 285/35 your rear tires are taller than stock and taller than the 305/30's Iwan

Thanks for the compliment

yes i agree on that matter, it is very stiff and doesn't bubble out. As for the height, it's a tad higher than stock due to it's profile and your 305/30 would look a tad lower but not by much

SXZ34 · 02-23-2013, 04:28 PM

Quote:

Originally Posted by Iwan72

Thanks for the compliment

yes i agree on that matter, it is very stiff and doesn't bubble out. As for the height, it's a tad higher than stock due to it's profile and your 305/30 would look a tad lower but not by much

Certainly! But yeah I actually think they'll work, if not my spacers in the rear are bolt ons so I can take em off until I could pick up a 20mm for the rear too

Unique_Z · 02-23-2013, 04:36 PM

Quote:

Originally Posted by Alan_2010

Certainly! But yeah I actually think they'll work, if not my spacers in the rear are bolt ons so I can take em off until I could pick up a 20mm for the rear too

If i were you, i'd rather invest on a decent set of rear camber arms, used ones would also do, and keep the rear spacers

SXZ34 · 02-23-2013, 04:45 PM

I don't really want to run it too much further negative and wear out the inside of my tires

Unique_Z · 02-23-2013, 05:09 PM

You'd be fine with at least -1.6 to -1.8, and that helps in handling as well.

SXZ34 · 02-23-2013, 05:32 PM

the rear stock camber arms should support that anyway shouldnt they?

Unique_Z · 02-23-2013, 06:35 PM

Yeap

chrischhorn · 02-23-2013, 06:53 PM

Quote:

Originally Posted by Alan_2010

Nah, my understanding of the stock rays offsets with my current spacers I have a +5 offset

sorry. ignore my comment earlier. I misread. I thought you said you had a 5mm spacer not +5 WITH spacer. my bad lol

SXZ34 · 02-23-2013, 06:57 PM

Quote:

Originally Posted by Iwan72

Yeap

I'm Good then! haha

SXZ34 · 02-23-2013, 07:01 PM

Quote:

Originally Posted by chrischhorn

sorry. ignore my comment earlier. I misread. I thought you said you had a 5mm spacer not +5 WITH spacer. my bad lol

No Worries, I was tossing around quite a few numbers haha

Unique_Z · 02-23-2013, 08:56 PM

Quote:

Originally Posted by Alan_2010

I'm Good then! haha

Nice! Keep the mods coming my friend

LMBmikeZ · 02-24-2013, 10:27 AM

Quote:

Originally Posted by Iwan72

Nice! Keep the mods coming my friend

and post

in here when you get the tires installed

SXZ34 · 02-24-2013, 06:05 PM

Quote:

Originally Posted by LMBmikeZ

and post

in here when you get the tires installed

O for sure!! I'm pretty stocked about the new tires. Rears have been sitting in my garage for a couple of weeks now and I can't wait to get them on

bmarcinczyk14 · 02-26-2013, 09:27 PM

I'm pretty interested on how this setup works for you as well. Some people say the 305's are too wide for our stock sport rims so I'll be real interested on hearing your opinion on how they fit on your car. Also what you decide to be the best spacer combo for this sizing for a flush look with those 305's in the rear.

SXZ34 · 02-27-2013, 08:28 AM

Quote:

Originally Posted by bmarcinczyk14

I'm pretty interested on how this setup works for you as well. Some people say the 305's are too wide for our stock sport rims so I'll be real interested on hearing your opinion on how they fit on your car. Also what you decide to be the best spacer combo for this sizing for a flush look with those 305's in the rear.

O I will definitely be sharing! Haha. But our wheel has no problem holding the 305. Specs call for a 10.5 but plenty have ran 305 without issue

02-23-2013, 05:09 PM	#20 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 17	You'd be fine with at least -1.6 to -1.8, and that helps in handling as well. __________________ My Z Build UniqueZ

02-23-2013, 06:35 PM	#22 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 17	Yeap __________________ My Z Build UniqueZ

02-26-2013, 09:27 PM	#29 (permalink)
bmarcinczyk14 Track Member Join Date: Jul 2009 Location: Chicago Posts: 505 Drives: 2010 370z 6spd Sport Rep Power: 16	I'm pretty interested on how this setup works for you as well. Some people say the 305's are too wide for our stock sport rims so I'll be real interested on hearing your opinion on how they fit on your car. Also what you decide to be the best spacer combo for this sizing for a flush look with those 305's in the rear. __________________ '10 370z -- '09 Ducati 848 -- '05 Kawasaki 636 Track Bike -- '02 Sentra SE-R Spec V

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] 2 used Bridgestone RE11's, 245/40/19	clintfocus	Parts for sale (Private Classifieds)	15	11-26-2012 12:48 PM
Bridgestone RE11's on 20" rims?	rhd	Wheels & Tires	1	06-17-2012 01:02 AM
Will it rub? SSR & Swifts	Fastfatdude	Wheels & Tires	11	11-23-2011 03:56 PM
RE11's and rain?	tjlazer	Wheels & Tires	9	11-10-2011 11:14 AM

02-23-2013, 04:45 PM	#19 (permalink)
SXZ34 Base Member Join Date: Jan 2010 Location: Kennesaw Georgia Posts: 182 Drives: 12 PW 370Z Sport 6MT Rep Power: 15	I don't really want to run it too much further negative and wear out the inside of my tires

02-23-2013, 05:32 PM	#21 (permalink)
SXZ34 Base Member Join Date: Jan 2010 Location: Kennesaw Georgia Posts: 182 Drives: 12 PW 370Z Sport 6MT Rep Power: 15	the rear stock camber arms should support that anyway shouldnt they?