Front Tire minor rub issues - What's the best fix

OTW Z-Boy · 10-31-2012, 05:55 PM

Hiya,

Looking for some help...

Running 19 x 9.5 up front on swifts with the stock tire (245/40/R19). Feeling a good amount of rub on freeway bumps. Due for new tires anyway, so what should I do?

Waiz · 10-31-2012, 06:35 PM

More negative Camber is your easiest fix but it means you will need to buy a front camber kit

Other option is to run a 245-35-19 instead

OTW Z-Boy · 10-31-2012, 06:45 PM

thanks for the reply:

increasing the camber with the amount I drive is going eat up tires quick. think the 35 side wall will look alright? wondering if its going to look kinda rubber band-y

Waiz · 10-31-2012, 06:50 PM

Quote:

Originally Posted by OTW Z-Boy

thanks for the reply:

increasing the camber with the amount I drive is going eat up tires quick. think the 35 side wall will look alright? wondering if its going to look kinda rubber band-y

35-series is what all of us 350z guys have been running forever, alot of you 370Z guys like to run 40's but we don't normally

Your other option is to use Coilovers to adjust the height and clear the fenders or just do like I do and put up with a small amount of rubbing every now and then and just run what you have

Trips · 10-31-2012, 06:53 PM

What type of wheels or offsets are you running with these tires?

98intrigue · 10-31-2012, 06:58 PM

A 40 series sidewall is pretty tall to begin with. Have you tried shaving the fender liner tabs? That's the only thing I used to run on.

OTW Z-Boy · 10-31-2012, 07:00 PM

Quote:

Originally Posted by Waizzz

35-series is what all of us 350z guys have been running forever, alot of you 370Z guys like to run 40's but we don't normally

Your other option is to use Coilovers to adjust the height and clear the fenders or just do like I do and put up with a small amount of rubbing every now and then and just run what you have

40 vs 35 is about 3/4 of an inch difference? Funny thing is that the clearance isnt bad but still rubbing.

Waiz · 10-31-2012, 07:05 PM

Quote:

Originally Posted by OTW Z-Boy

40 vs 35 is about 3/4 of an inch difference? Funny thing is that the clearance isnt bad but still rubbing.

That can be the differnece between rubbing or not but since you're on springs it might just be something you have to live with until can upgrade to coils

Also, the brand of tire has something to do with it as well. When I ran BFG KDW2's it was a much fatter tire than the current set of Continentals that I am running and it rubbed more often

If I were you I would just sell those tires and downgrade to 35-series, it's going to be your easiest and cheapest option

martin82 · 10-31-2012, 07:06 PM

You will need more camber, I think ur issue is mostly offset on those wheels... than tire sizes....

OTW Z-Boy · 10-31-2012, 07:06 PM

Quote:

Originally Posted by Triple's

What type of wheels or offsets are you running with these tires?

Mixed feelings on the varrstoen 1.1.2 but for the buck its good enough to get rid of the stock look.

front 19 X 9.5 +12et on 245/40
rear 19 x 11 +15et on 275/35

Sorry about the photos being upside down looks rt side up in iphoto

martin82 · 10-31-2012, 07:07 PM

yeah its ur offset the problem more than tire....... just add more camber u'll be fine... I daily on -3.3, keep it around -2.5 or so and u shouldn't have any weird wear...

OTW Z-Boy · 10-31-2012, 07:10 PM

Quote:

Originally Posted by martin82

yeah its ur offset the problem more than tire....... just add more camber u'll be fine... I daily on -3.3, keep it around -2.5 or so and u shouldn't have any weird wear...

On the front you are on a -3.3? Wheel and offset size?

OTW Z-Boy · 10-31-2012, 07:24 PM

Quote:

Originally Posted by Waizzz

More negative Camber is your easiest fix but it means you will need to buy a front camber kit

Other option is to run a 245-35-19 instead

Any recomendations on camber kits brand?

Liquid_G · 10-31-2012, 07:33 PM

Quote:

Originally Posted by OTW Z-Boy

thanks for the reply:

increasing the camber with the amount I drive is going eat up tires quick. think the 35 side wall will look alright? wondering if its going to look kinda rubber band-y

camber doesn't eat tires.. toe being off does.

martin82 · 10-31-2012, 08:01 PM

I have the stock 19" wheels run 275/35/19 square, 285,/35/19 square.... now I picked up track wheels 18x9.5+22 and 18x10.5+15 running 285/35/18 square

10-31-2012, 05:55 PM	#1 (permalink)
OTW Z-Boy A True Z Fanatic Join Date: Mar 2012 Location: Temecula Ca Posts: 1,225 Drives: 14 Nismo 370z #495 Rep Power: 750	Front Tire minor rub issues - What's the best fix Hiya, Looking for some help... Running 19 x 9.5 up front on swifts with the stock tire (245/40/R19). Feeling a good amount of rub on freeway bumps. Due for new tires anyway, so what should I do?

10-31-2012, 06:45 PM	#3 (permalink)
OTW Z-Boy A True Z Fanatic Join Date: Mar 2012 Location: Temecula Ca Posts: 1,225 Drives: 14 Nismo 370z #495 Rep Power: 750	thanks for the reply: increasing the camber with the amount I drive is going eat up tires quick. think the 35 side wall will look alright? wondering if its going to look kinda rubber band-y __________________ 2014: Nismo 370z #495 Magnetic Black - Stillen Gen3 CAI \| SPL F/R Camber Arms \| HKS Hypermax IV \| JDM Rear Fog Light \|GT-R Push Start Button \| Z1 2 Piece D/S \| Illuminated Kicks \| Tommykaira \| Work VS-XX BKB Step Lip +23/+13 19" 9.5/11 \| Fast Intentions RHFC TDX CBE 12" CF \| EcuTek

10-31-2012, 06:53 PM	#5 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	What type of wheels or offsets are you running with these tires? __________________

10-31-2012, 06:58 PM	#6 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 38 Posts: 4,855 Drives: 2014 Viper Rep Power: 429	A 40 series sidewall is pretty tall to begin with. Have you tried shaving the fender liner tabs? That's the only thing I used to run on. __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

10-31-2012, 07:06 PM	#9 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	You will need more camber, I think ur issue is mostly offset on those wheels... than tire sizes.... Merv likes this.

10-31-2012, 06:35 PM	#2 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	More negative Camber is your easiest fix but it means you will need to buy a front camber kit Other option is to run a 245-35-19 instead

10-31-2012, 07:07 PM	#11 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	yeah its ur offset the problem more than tire....... just add more camber u'll be fine... I daily on -3.3, keep it around -2.5 or so and u shouldn't have any weird wear...

10-31-2012, 08:01 PM	#15 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	I have the stock 19" wheels run 275/35/19 square, 285,/35/19 square.... now I picked up track wheels 18x9.5+22 and 18x10.5+15 running 285/35/18 square

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front Spacer Issues( Inner Rim)HELP	BlueZair	Wheels & Tires	23	02-27-2012 01:40 AM
Tire issues	kidkotic2001	Wheels & Tires	30	06-06-2011 10:56 PM
Rear Tire Issues!	DooDooBrown	Wheels & Tires	20	05-06-2011 12:24 AM
09 Nismo front fascia/bumper minor damage	antfd3s	Parts for sale (Private Classifieds)	11	02-10-2011 06:20 AM
Issues with mounting the front wheels	B1nks	Wheels & Tires	11	07-06-2009 10:42 PM