Another ADV.1 Quality Control Failure

Nut_N_Much

I applaud you on your patience with these guy's.. What size gun do you own. Please insure it remains in the lock box...

__________________

Did new cool science stuff to the car !!!
http://www.the370z.com/mazoc/99606-z...y-14-17-a.html
http://www.the370z.com/diy-section-d...-w-videos.html

VinceThe1

Guys not to defend them by any means but if safety is the only concern here then it is not an issue, atleast not because of spacing between the holes. Reason being is that the thin metal is only about 25-30% of the round hole, which means it is impossible for the bolt to "pop out" of that hole, and when you have forces distributed to so many holes, chanses of that failing are extremely minimal. I am an engineer and machine all types of products for a living.

Now, do I agree with them? No. For me the safety and vibration issues are due to the multi-piece wheels themselves (because of the possibility of human error when assembling, like overtightening/leaving the bolts too loose), and no matter what, this is a brand new production wheel, not a prototype...It should have no mistakes, should of been scrapped just because it is not to plan, regardless if it will do the job or not. This is a careless error and these are not cheap wheels where something like this would be "understandable". $8000 to me is a ridiculous price...these wheels should be beyond perfect.

phelan

Mmmm....distributed forces, I had forgotten about that. Good point. I would hope that the torque required for the fasteners would be on the assembly drawing though.

As an engineer, I would actually think if the rationale showed it's still good for use-as-is, the initial cost of material may be prohibitive, and they can provide the rationale and move on. I still don't agree, given the price I can't figure out how they couldn't just buy more metal and redo it, but just saying.

__________________

凛 ('Rin') - 2009 Nissan 370Z
With silence comes peace. With peace comes freedom. With freedom comes silence.

VinceThe1

exactly, for that price there should be no compromises.

memorylasts

Thats one of the main issues, for what they charge they have to many errors and wont go fixing it unless you create a stink on the net. thankfully this isnt my set of wheels as someone had mentioned, I read about this stuff and post it up. even though i know ADV.1's arnt big here it is still good to know.

__________________
somewhat-journal-thingy