Wheel Spacer Indecisiveness!!

370SteeZ · 01-18-2012, 08:26 PM

After lowering my car on H&R springs a few months ago, I right away knew I needed spacers for my car. A popular choice was 25R/20F, but i've noticed that it doesn't push the wheels out as far as I want them to. Keep in mind, I'm running stock wheels & rims. I've read around the forum that with 20mm & 25mm spacers in the front, the tires will rub the fenders, but I don't find that to be a very big deal. I'm just hoping that the spacers don't make the car's stance look awful.

Basically, I'm just really looking for photos of any of your guys's Z's who are running either: 25mm in the front AND/OR 30mm in the rear (With stock 19" rims)!

It'd be greatly appreciated!

gurneyeagle · 01-18-2012, 08:42 PM

Quote:

Originally Posted by 370SteeZ

After lowering my car on H&R springs a few months ago, I right away knew I needed spacers for my car. A popular choice was 25R/20F, but i've noticed that it doesn't push the wheels out as far as I want them to. Keep in mind, I'm running stock wheels & rims. I've read around the forum that with 20mm & 25mm spacers in the front, the tires will rub the fenders, but I don't find that to be a very big deal. I'm just hoping that the spacers don't make the car's stance look awful.

Basically, I'm just really looking for photos of any of your guys's Z's who are running either: 25mm in the front AND/OR 30mm in the rear (With stock 19" rims)!

It'd be greatly appreciated!

Here's mine with 15/20 and stock 19's. I could have gone 20/25, but anything beyond that would have been sticking out too far IMO. With my Nismo Rims, the 15/20 is as far as I would want to go.

Ni55anPat · 01-18-2012, 11:01 PM

20/25 close thread

haitech · 01-19-2012, 01:34 AM

Quote:

Originally Posted by Ni55anPat

20/25 close thread

XwChriswX · 01-19-2012, 01:44 AM

You will come to find rubbing to be a very big deal.

Kingbaby · 01-19-2012, 01:46 AM

+1

yup...especially on an incline...

Unique_Z · 01-19-2012, 07:52 AM

Here's my setup with 20/25!

but bear in mind im not using oem rubber, im on RE11 now 265/35/19 Fronts and 285/35/19 Rears

alejo · 01-19-2012, 08:07 AM

20/25 enough said, good bye!

kenchan · 01-19-2012, 09:19 AM

Quote:

Originally Posted by gurneyeagle

Here's mine with 15/20 and stock 19's. I could have gone 20/25, but anything beyond that would have been sticking out too far IMO. With my Nismo Rims, the 15/20 is as far as I would want to go.

looks perfect to me, gurney.

not overdone, very clean lines.

Powder370 · 01-19-2012, 03:55 PM

vividracing · 01-19-2012, 05:26 PM

20/25 if you want a good look without nasty rubbing. 25/30 if rubbing isn't going to drive you nuts.

I suggest H&R spacers. PM me if you want pricing.

370Ztune · 01-19-2012, 05:28 PM

20/25 for no fender mods. 25/30 if you're willing to roll your fenders.

Project Kics are the way to go for a really high-quality spacer that's meant to take abuse. (they're used on race and drift cars in Japan extensively)

gurneyeagle · 01-19-2012, 07:54 PM

Quote:

Originally Posted by kenchan

looks perfect to me, gurney.

not overdone, very clean lines.

Thank you very much Mr. kenchan!

scottnismo · 01-19-2012, 10:19 PM

im running 20F 15R but im not sure if it is okay for driving like this set up. Anyone knows?????

Unique_Z · 01-19-2012, 10:36 PM

Quote:

Originally Posted by gurneyeagle

Here's mine with 15/20 and stock 19's. I could have gone 20/25, but anything beyond that would have been sticking out too far IMO. With my Nismo Rims, the 15/20 is as far as I would want to go.

Quote:

Originally Posted by scottnismo

im running 20F 15R but im not sure if it is okay for driving like this set up. Anyone knows?????

Here you go.

01-18-2012, 08:26 PM	#1 (permalink)
370SteeZ Base Member Join Date: Jun 2009 Location: SoCal / SGV Area Posts: 104 Drives: 40th Anniversary M6 Rep Power: 15	Wheel Spacer Indecisiveness!! After lowering my car on H&R springs a few months ago, I right away knew I needed spacers for my car. A popular choice was 25R/20F, but i've noticed that it doesn't push the wheels out as far as I want them to. Keep in mind, I'm running stock wheels & rims. I've read around the forum that with 20mm & 25mm spacers in the front, the tires will rub the fenders, but I don't find that to be a very big deal. I'm just hoping that the spacers don't make the car's stance look awful. Basically, I'm just really looking for photos of any of your guys's Z's who are running either: 25mm in the front AND/OR 30mm in the rear (With stock 19" rims)! It'd be greatly appreciated! __________________ Accuair E-Level \|\| Fast Intentions SS (Non-Res) \|\| Stillen Gen.3 \|\| Z1 Test Pipes \|\| SPC Camber Arms \|\| Ichiba Spacers

01-19-2012, 01:44 AM	#5 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	You will come to find rubbing to be a very big deal. filip00 likes this. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

01-19-2012, 07:52 AM	#7 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 17	Here's my setup with 20/25! but bear in mind im not using oem rubber, im on RE11 now 265/35/19 Fronts and 285/35/19 Rears __________________ My Z Build UniqueZ

01-19-2012, 08:07 AM	#8 (permalink)
alejo Base Member Join Date: May 2010 Location: Pensacola, FL Posts: 107 Drives: 10 T/S,NAV,MT, 08 R6 Rep Power: 14	20/25 enough said, good bye! __________________ SWIFTS SPEC R -- 20MM F/25MM R H&R SPACERS -- REAR SPC CAMBER ARM -- F.I. CBE 18" SS -- F.I. HFCs -- STILLEN GEN 3 INTAKES -- UPREV 310WHP STD/304WHP SAE -- Z1 25 row oil cooler -- GT-R push to start button

01-19-2012, 03:55 PM	#10 (permalink)
Powder370 Base Member Join Date: Jan 2012 Location: Austin Posts: 68 Drives: 10 PW 6MT Rep Power: 13	__________________ JWT Dual pop chargers with ModShack fang vents M3 Clear Bra

01-18-2012, 11:01 PM	#3 (permalink)
Ni55anPat A True Z Fanatic Join Date: Mar 2010 Location: Chicago Posts: 1,833 Drives: Zed Rep Power: 18	20/25 close thread

01-19-2012, 05:26 PM	#11 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 37 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 38	20/25 if you want a good look without nasty rubbing. 25/30 if rubbing isn't going to drive you nuts. I suggest H&R spacers. PM me if you want pricing. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

01-19-2012, 05:28 PM	#12 (permalink)
370Ztune The370Z.com Sponsor Join Date: Jan 2009 Location: Los Angeles, CA Posts: 2,477 Drives: Z34 370Z Rep Power: 46	20/25 for no fender mods. 25/30 if you're willing to roll your fenders. Project Kics are the way to go for a really high-quality spacer that's meant to take abuse. (they're used on race and drift cars in Japan extensively) __________________ The Real JDM Facebook Bulletproof Instagram

01-19-2012, 10:19 PM	#14 (permalink)
scottnismo Base Member Join Date: Dec 2011 Location: in Posts: 76 Drives: 2010 370Z NISMO Rep Power: 13	im running 20F 15R but im not sure if it is okay for driving like this set up. Anyone knows?????

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: H&R wheel spacer kits	6MT	Wanted	6	01-26-2012 10:12 AM
[WTB] WTB wheel spacer	Xsad	Parts for sale (Private Classifieds)	7	10-30-2011 04:06 PM
Wheel Spacer Advice	ccdominic	Wheels & Tires	10	10-06-2011 02:02 PM
which wheel spacer is better?	x102x	Exterior & Interior	10	07-06-2011 06:20 AM
Wheel spacer question.	zZSoCalZz	Wheels & Tires	2	06-17-2010 03:11 PM