Wheel Spacers 101

HngNgn19 · 03-24-2014, 09:22 PM

Thank you boys, I appreciate it.

kenchan · 03-24-2014, 10:45 PM

np, GL with your project.

Fulljim · 04-19-2014, 11:02 PM

Anyone experienced wheels getting stuck on the spacer ?

I've got ichiba V2 spacers and I tried to remove my wheels today, they are pretty stuck there ... I'll try to hammer them tomorrow but i'm I the only one ?

Thx

Any tip and tricks will be appreciated !

Drex · 04-20-2014, 02:38 AM

yea it happens, use some anti-seize next time

igotcabada · 04-22-2014, 04:17 PM

I've read in this thread that 20mm bolt on style of spacers both CAN and CANNOT be used on the front wheels if you have Rays. Is there a definitive answer to this??

CNC Aluminum Bolt-On Wheel Spacers (20mm, 25mm, & 30mm)

I was looking to buy the above all the way around.

Bryan212 · 04-22-2014, 08:46 PM

Quote:

Originally Posted by igotcabada

I've read in this thread that 20mm bolt on style of spacers both CAN and CANNOT be used on the front wheels if you have Rays. Is there a definitive answer to this??

CNC Aluminum Bolt-On Wheel Spacers (20mm, 25mm, & 30mm)

I was looking to buy the above all the way around.

I have the Rays with 20mm spacers in the front and 25mm in the back. I haven't had any problems at all. And they are the bolt on ones.

Carlitoboy · 04-23-2014, 10:27 AM

Quote:

Originally Posted by Bryan212

I have the Rays with 20mm spacers in the front and 25mm in the back. I haven't had any problems at all. And they are the bolt on ones.

I just ordered the Eibach Pro-Spacers System 4, 20mm front & 25mm rear for a 2010 Z with stock springs/suspension and stock Rays. I haven't seen any posts about any conflicts with this setup so hope all goes well. I'll post back shortly.

Driftomodachi · 04-23-2014, 07:00 PM

Quote:

Originally Posted by Trips

If you're tracking most opt to go with the ver 1 stud replacement style

For non track most opt to use ver 2 that bolt on

I wouldn't replace studs for track. Track duty sees more torsional stress on the lengthened studs which can stretch or break the studs and cause the wheel to come loose or fall off.

Bolt on spacers are torqued down on the wheel and on the spacer so there is no torsional stress on the studs.

Tell me if I'm wrong

RumbleFish · 04-24-2014, 05:34 PM

Quote:

Originally Posted by igotcabada

I've read in this thread that 20mm bolt on style of spacers both CAN and CANNOT be used on the front wheels if you have Rays. Is there a definitive answer to this??

CNC Aluminum Bolt-On Wheel Spacers (20mm, 25mm, & 30mm)

I was looking to buy the above all the way around.

I've got 20mm H&R bolt-ons all around w/ my oem 19" Rays

No problems.

CBRsummer · 04-28-2014, 02:57 PM

Quote:

Originally Posted by igotcabada

I've read in this thread that 20mm bolt on style of spacers both CAN and CANNOT be used on the front wheels if you have Rays. Is there a definitive answer to this??

CNC Aluminum Bolt-On Wheel Spacers (20mm, 25mm, & 30mm)

I was looking to buy the above all the way around.

did you order these up yet? i just jumped on here looking to answer the same question. the stillen site says the bolt on h&r's won't fit the front wheels but i could have sworn i saw people on here with them on the fronts. i just bought my z and i'm looking at the z1 spacers. 20 front/25 rear. that seems to be best looking option on the factory rays.

as i was saying

Quote:

Originally Posted by RumbleFish

I've got 20mm H&R bolt-ons all around w/ my oem 19" Rays

No problems.

Antistupid · 05-01-2014, 10:47 PM

So I read a few threads, Many speak of the stock rays working. Im just about set on 15mm front and 20mm rear, BUT I have one question (please don't bash me

...

I plan to put 305s on the rear the next couple of months... the 20mm spacers in the rear shouldn't create and issue right? EDIT: stock ride height, no plans to lower

RoadsterST · 05-02-2014, 02:02 AM

Quote:

Originally Posted by Antistupid

So I read a few threads, Many speak of the stock rays working. Im just about set on 15mm front and 20mm rear, BUT I have one question (please don't bash me

...

I plan to put 305s on the rear the next couple of months... the 20mm spacers in the rear shouldn't create and issue right? EDIT: stock ride height, no plans to lower

I have 15mm and 305's. The tire was flush at the top. I think 20 would look just as good.

Sent while driving!

Antistupid · 05-02-2014, 07:44 PM

Im just worried about rubbing. Guess it can't hurt to try. ...

Sent while sitting on the sofa after eating boiled sea food

RoadsterST · 05-04-2014, 07:00 AM

Quote:

Originally Posted by Antistupid

Im just worried about rubbing. Guess it can't hurt to try. ...

Sent while sitting on the sofa after eating boiled sea food

If you by 20's and don't like them, I'll trade you 2 15's for 2 20's

Sent while driving!

sikblu · 05-04-2014, 03:18 PM

Went thru 15 pages.. jajaj just wanna clear before I buy.. im trying to put bolt ons 15mm in rear with aftermarket wheels whould 15mm clear the studs on rear.?? Wheels I went with need a little more poke..

03-24-2014, 09:22 PM	#226 (permalink)
HngNgn19 Base Member Join Date: Jan 2014 Location: San Jose, CA Posts: 157 Drives: 14 370Z Dark Black Rep Power: 11	Thank you boys, I appreciate it. kenchan likes this.

04-19-2014, 11:02 PM	#228 (permalink)
Fulljim Base Member Join Date: Mar 2013 Location: Qc, Canada Posts: 44 Drives: 09 Nismo 370Z Rep Power: 12	Problem ? Anyone experienced wheels getting stuck on the spacer ? I've got ichiba V2 spacers and I tried to remove my wheels today, they are pretty stuck there ... I'll try to hammer them tomorrow but i'm I the only one ? Thx Any tip and tricks will be appreciated !

04-20-2014, 02:38 AM	#229 (permalink)
Drex Enthusiast Member Join Date: Apr 2011 Location: Maryland Posts: 498 Drives: '11 370z MB 6MT SP Rep Power: 14	yea it happens, use some anti-seize next time wheee! and BeemaaZ like this. __________________ 2011 Nissan 370z \| 6MT \| Magnetic Black \| Sport Package

05-01-2014, 10:47 PM	#236 (permalink)
Antistupid Base Member Join Date: Oct 2013 Location: NOLA Posts: 51 Drives: 09' 370Z 6MT Rep Power: 11	So I read a few threads, Many speak of the stock rays working. Im just about set on 15mm front and 20mm rear, BUT I have one question (please don't bash me ... I plan to put 305s on the rear the next couple of months... the 20mm spacers in the rear shouldn't create and issue right? EDIT: stock ride height, no plans to lower Last edited by Antistupid; 05-01-2014 at 10:56 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Spacers - please help !	saxx77	Nismo 370Z	32	08-12-2014 06:30 PM
[FOR SALE] 5mm Wheel Spacers $60	jspec11	Parts for sale (Private Classifieds)	8	11-26-2011 11:21 AM
[WTB] H & R wheel spacers...	6MT	Parts for sale (Private Classifieds)	0	08-19-2011 01:48 PM
wheel spacers	black09Z	Wheels & Tires	9	05-19-2011 10:10 AM
wheel spacers help	thispecialk	Wheels & Tires	1	10-18-2010 08:00 PM

03-24-2014, 10:45 PM	#227 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	np, GL with your project.

04-22-2014, 04:17 PM	#230 (permalink)
igotcabada Base Member Join Date: Oct 2010 Location: Charlotte Posts: 104 Drives: 10 Nissan 370Z 40th Rep Power: 14	I've read in this thread that 20mm bolt on style of spacers both CAN and CANNOT be used on the front wheels if you have Rays. Is there a definitive answer to this?? CNC Aluminum Bolt-On Wheel Spacers (20mm, 25mm, & 30mm) I was looking to buy the above all the way around.

05-02-2014, 07:44 PM	#238 (permalink)
Antistupid Base Member Join Date: Oct 2013 Location: NOLA Posts: 51 Drives: 09' 370Z 6MT Rep Power: 11	Im just worried about rubbing. Guess it can't hurt to try. ... Sent while sitting on the sofa after eating boiled sea food

05-04-2014, 03:18 PM	#240 (permalink)
sikblu Base Member Join Date: Sep 2013 Location: Houston TX Posts: 27 Drives: 370z mty BLuetouring Rep Power: 11	Went thru 15 pages.. jajaj just wanna clear before I buy.. im trying to put bolt ons 15mm in rear with aftermarket wheels whould 15mm clear the studs on rear.?? Wheels I went with need a little more poke..