Wheel Offset Discussion Thread... How far can we go?

[moore.speed]

Originally Posted by Shirichqin

How would these specs work on our Z's?

19x9.5ET10
19x11ET-2

You'd have to be slammed and run negative camber. put a 285/30 or 295/30 around the rear and you could be ok at a low ride height and a decent amount of negative camber.

With a good drop, fronts should be ok. I would not run wider than 245/35 on that front wheel width and offset. I have a that size on my 9.5" front wheel and it's flush. you will clear the front with a good drop at 1.5-2.5 degrees negative camber.