Wheel Offset Discussion Thread... How far can we go?

XLR8SN · 07-20-2011, 01:09 PM

I am guessing that it will fit based on everyones answers to other similar setups, but anyone have opinions on a 19X10.5 +35 front fitment running a 275/35 tire?

Trying to match up the lip sizes on front and rear rims. The TE 9.5 +12 and the G2 10.5 +35 fronts are the only options.

Running the 9.5 +12 would require too much suspension mods versus the drop springs that I have. Laws here get a little tricky when running major suspension mods, i.e. coilovers.

Thoughts??

ZRoland · 07-24-2011, 10:48 AM

Ok experts. Need your input on the following:

Front 19x9.5 +20. 245/40/19
Rear. 19x11 +18. 295/30/19:t

Stock height.

Will this work? Appreciate your inputs. Thanks in advance.

bullitt5897 · 07-24-2011, 10:53 AM

Quote:

Originally Posted by ZRoland

Ok experts. Need your input on the following:

Front 19x9.5 +20. 245/40/19
Rear. 19x11 +18. 295/30/19:t

Stock height.

Will this work? Appreciate your inputs. Thanks in advance.

Yes, it will. You will need to run camber in the rear.

Mike

Spec Jay · 08-18-2011, 07:38 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

Yes, it will. You will need to run camber in the rear.

Mike

probally not much if at all, i think he can stay at the high end of within spec. , im running a 285/30/19 on a 19x10.5 -3 with -2 degrees. no rubbing, 15mm is alot to play with

Damangler · 08-22-2011, 01:00 PM

I just got in a set of 20x9.5 +10 and 20x10.5 +0 , Tires are 255/30/20 and 305/25/20. I have some BC br coil's that are going to be installed, question is will I need to get front camber arms? I have rear spc arms already so the rear should be safe.

07-24-2011, 10:48 AM	#2 (permalink)
ZRoland Base Member Join Date: Jun 2010 Location: Dallas/Arkansas Posts: 120 Drives: 2010 370Z Roadster Rep Power: 16	Wheel and tire advise Ok experts. Need your input on the following: Front 19x9.5 +20. 245/40/19 Rear. 19x11 +18. 295/30/19:t Stock height. Will this work? Appreciate your inputs. Thanks in advance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z offset	azn370z	Wheels & Tires	28	10-06-2010 09:53 PM
Need Help Indentifing a wheel ..	Q_USAF	Wheels & Tires	2	04-12-2009 11:06 PM
RAYS wheel nut.?	Chan Chee Hoe	Wheels & Tires	4	03-15-2009 09:02 PM
Peak Power discussion...	klubbheads	Engine & Drivetrain	4	02-19-2009 08:52 PM
Discussion Thread: 370z pictures from Europe 11.05.08	AK370Z	Nissan 370Z General Discussions	17	11-09-2008 04:04 PM

07-20-2011, 01:09 PM	#1 (permalink)
XLR8SN Enthusiast Member Join Date: Jun 2009 Location: Hawaii Posts: 363 Drives: Nissan Rep Power: 17	I am guessing that it will fit based on everyones answers to other similar setups, but anyone have opinions on a 19X10.5 +35 front fitment running a 275/35 tire? Trying to match up the lip sizes on front and rear rims. The TE 9.5 +12 and the G2 10.5 +35 fronts are the only options. Running the 9.5 +12 would require too much suspension mods versus the drop springs that I have. Laws here get a little tricky when running major suspension mods, i.e. coilovers. Thoughts??

08-22-2011, 01:00 PM	#5 (permalink)
Damangler Base Member Join Date: Sep 2009 Location: St. Petersburg, Fl Posts: 28 Drives: 09 Black 370z Rep Power: 17	I just got in a set of 20x9.5 +10 and 20x10.5 +0 , Tires are 255/30/20 and 305/25/20. I have some BC br coil's that are going to be installed, question is will I need to get front camber arms? I have rear spc arms already so the rear should be safe.