TSW Nurburgring

Azroadster · 09-13-2010, 07:11 PM

Some of you may have read my earlier post about having a wheel damaged when a moron in a pickup came over on my causing me to hit a median. I called the good people at Wheelsdirectonline.com from work today and talked to them about these wheels. I am looking at 19x9.5" up front with a +41 offset and 19x10.5 with a +21 offset. They are extremely reasonable and I have had TSW wheels on a few cars before. I am thinking seriously about pulling the trigger and ordering these. What do you guys think?

AZ Roadster

http://www.the370z.com/members/azroa...er-pop-std.jpg

WarmAndSCSI · 09-13-2010, 07:27 PM

I like em and TSW is pretty good quality.

I'd look at the 19x9.5" +32 mm fronts, though. Should be more flush that way.

Jeffblue · 09-13-2010, 08:05 PM

yea i'd definitely go with a bit more aggressive in the front, or just maybe run a spacer if thats the only size they come in.

Chris_1 · 09-13-2010, 08:24 PM

Guys, he has spacers on his car, so we are going to use those to help the offsets and it also helps to keep him from having to take them off and on. Trust me, I wouldnt suggest something unless I knew it, and this man knows his stuff.

Jeffblue · 09-13-2010, 08:34 PM

Quote:

Originally Posted by Chris@WheelsDirectOnline.com

Guys, he has spacers on his car, so we are going to use those to help the offsets and it also helps to keep him from having to them them off and on. Trust me, I wouldnt suggest something unless I knew it, and this man knows his stuff.

Ah, makes sense. Should look nice!

OMGWTFBBQ · 09-13-2010, 08:41 PM

Well if you don't have to use spacers, then why not just get rid of them? If the wheels come in a more favorable offset, I'd just ditch the spacers and run a lower offset wheel. Then again, what do I know?

Azroadster · 09-13-2010, 08:45 PM

Yes, I am already running 15mm spacers in the front and I don't want to have to remove the lugs. Chris was very helpful today and I am about 95% sure that I am going to get these wheels. I also think that going to a 10.5" in the rear will look better with my 305/30 tires back there. I am also running 20mm spacers in the rear as well.

I guess the guy in the pick up truck that forced me against the median actually did me a service. I would have waited thu the winter to get new wheels, but now that I have done some research I have found that there are good quality, great looking wheels out there for a reasonable price.

AZ Roadster

Chris_1 · 09-13-2010, 09:17 PM

Quote:

Originally Posted by OMGWTFBBQ

Well if you don't have to use spacers, then why not just get rid of them? If the wheels come in a more favorable offset, I'd just ditch the spacers and run a lower offset wheel. Then again, what do I know?

Well technically you would be right, but spacers like az has said usually require longer studs. He already has the studs installed which would make it a huge pain in the butt to have to take them off. By going with the +41, he will keep his spacer, and have an offset of +26 I am pretty sure which should give him almost a perfect look.

kenchan · 09-13-2010, 09:43 PM

chris do you have picts of the back side of the wheels? would it be able to clear V2 type spacers with studs build-in? (this is they type i have in 10-25mm sizes)

not bad! i like these mesh wheels.

Chris_1 · 09-13-2010, 09:53 PM

Let me see if I can ask the manufacturer, but unless you have something oddly protruding out of your spacers, their shouldnt be any issue. A spacer is supposed to mimic the factory hub part, so I dont see what problem you could have, but let me see what I can do.

Jamaica · 09-13-2010, 09:55 PM

Wheels are not bad.

Chris_1 · 09-13-2010, 10:02 PM

TSW Aftermarket Wheels 101 Video. What makes TSW aftermarket wheels special? Our video explains|tswalloywheels.com

This is a video and it shows the rear of a snetterton, which is very similar to pretty much all their wheels. Its right around 1:24, so take a peek and it should tell you if your spacers should work, which again shouldnt be an issue at all.

cossie1600 · 09-13-2010, 11:16 PM

One problem with TSW is that they are heavy, my last set was 30lbs a piece for 19x9.5

This is 9.5 with 35mm offset

Chris_1 · 09-14-2010, 12:12 AM

Quote:

Originally Posted by cossie1600

One problem with TSW is that they are heavy, my last set was 30lbs a piece for 19x9.5

This is 9.5 with 35mm offset

Definately on your same page, but TSW has changed since I think the bremma is the wheel I saw you had. They have a new casting process, and their wheels are stronger and lighter now, using the same process as forgestar does pretty much. Their pricing has increased, but for good reason as they are producing much better wheels then before. I have seen this stuff in person and comparing side by side to the old, its like a different brand.

OMGWTFBBQ · 09-14-2010, 03:15 AM

Open ended lug nuts ftw.

09-13-2010, 07:11 PM	#1 (permalink)
Azroadster Base Member Join Date: Jun 2009 Location: Arizona Posts: 195 Drives: 2009 370Z Yellow 7sp Rep Power: 15	TSW Nurburgring Some of you may have read my earlier post about having a wheel damaged when a moron in a pickup came over on my causing me to hit a median. I called the good people at Wheelsdirectonline.com from work today and talked to them about these wheels. I am looking at 19x9.5" up front with a +41 offset and 19x10.5 with a +21 offset. They are extremely reasonable and I have had TSW wheels on a few cars before. I am thinking seriously about pulling the trigger and ordering these. What do you guys think? AZ Roadster http://www.the370z.com/members/azroa...er-pop-std.jpg __________________ AZ Roadster '09 Base\|Chicane Yellow\|TSW Nurburgrings\|Stillen CBE\|Eclipse AVN726E In Dash DVD/NAV\|Clear Bra\|H&R Spacers 15/20\|Hankook Ventus V-12's 275/35 & 305/30

09-13-2010, 07:27 PM	#2 (permalink)
WarmAndSCSI A True Z Fanatic Join Date: May 2010 Location: SLC, UT Posts: 1,671 Drives: '08 Evo X \| '10 370Z Rep Power: 17	I like em and TSW is pretty good quality. I'd look at the 19x9.5" +32 mm fronts, though. Should be more flush that way. __________________ '10 PW 370Z 7AT - wife's car - Project Raspberry Cheesecake '08 Evo X - built motor+trans \| BB-X @ 32 psi \| CH3OH \| self-built+tuned - ??? WHP '01 Galant V6 - built motor \| GT35R \| self-built+tuned - 550+ WHP (retired)

09-13-2010, 08:24 PM	#4 (permalink)
Chris_1 Track Member Join Date: Mar 2010 Location: Statewide Posts: 838 Drives: Nissan 370Z Roadster Rep Power: 16	Guys, he has spacers on his car, so we are going to use those to help the offsets and it also helps to keep him from having to take them off and on. Trust me, I wouldnt suggest something unless I knew it, and this man knows his stuff. Last edited by Chris_1; 09-13-2010 at 08:36 PM.

09-13-2010, 08:45 PM	#7 (permalink)
Azroadster Base Member Join Date: Jun 2009 Location: Arizona Posts: 195 Drives: 2009 370Z Yellow 7sp Rep Power: 15	Yes, I am already running 15mm spacers in the front and I don't want to have to remove the lugs. Chris was very helpful today and I am about 95% sure that I am going to get these wheels. I also think that going to a 10.5" in the rear will look better with my 305/30 tires back there. I am also running 20mm spacers in the rear as well. I guess the guy in the pick up truck that forced me against the median actually did me a service. I would have waited thu the winter to get new wheels, but now that I have done some research I have found that there are good quality, great looking wheels out there for a reasonable price. AZ Roadster __________________ AZ Roadster '09 Base\|Chicane Yellow\|TSW Nurburgrings\|Stillen CBE\|Eclipse AVN726E In Dash DVD/NAV\|Clear Bra\|H&R Spacers 15/20\|Hankook Ventus V-12's 275/35 & 305/30

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nürburgring Live Webcam!	AK370Z	Track / Autocross / Drifting / Dragstrip	61	08-19-2014 10:43 AM
38th Nürburgring 24 Hours on the (Nürburgring) Nordschleife May 13-16 2010	AK370Z	Track / Autocross / Drifting / Dragstrip	4	06-06-2012 12:45 PM
370Z at Nurburgring	spearfish25	Track / Autocross / Drifting / Dragstrip	43	07-10-2011 12:47 PM
Nürburgring Safety Car	Holliday	Other Vehicles	15	08-18-2010 08:08 PM
Viper vs. GT3 at Nurburgring	semtex	Other Vehicles	17	05-23-2009 03:00 PM

09-13-2010, 08:05 PM	#3 (permalink)
Jeffblue A True Z Fanatic Join Date: Dec 2009 Location: NY Age: 36 Posts: 9,192 Drives: Z32TT & 335xi Coupe Rep Power: 37	yea i'd definitely go with a bit more aggressive in the front, or just maybe run a spacer if thats the only size they come in.

09-13-2010, 08:41 PM	#6 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	Well if you don't have to use spacers, then why not just get rid of them? If the wheels come in a more favorable offset, I'd just ditch the spacers and run a lower offset wheel. Then again, what do I know?

09-13-2010, 09:43 PM	#9 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	chris do you have picts of the back side of the wheels? would it be able to clear V2 type spacers with studs build-in? (this is they type i have in 10-25mm sizes) not bad! i like these mesh wheels.

09-13-2010, 09:53 PM	#10 (permalink)
Chris_1 Track Member Join Date: Mar 2010 Location: Statewide Posts: 838 Drives: Nissan 370Z Roadster Rep Power: 16	Let me see if I can ask the manufacturer, but unless you have something oddly protruding out of your spacers, their shouldnt be any issue. A spacer is supposed to mimic the factory hub part, so I dont see what problem you could have, but let me see what I can do.

09-13-2010, 09:55 PM	#11 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	Wheels are not bad.

09-13-2010, 10:02 PM	#12 (permalink)
Chris_1 Track Member Join Date: Mar 2010 Location: Statewide Posts: 838 Drives: Nissan 370Z Roadster Rep Power: 16	TSW Aftermarket Wheels 101 Video. What makes TSW aftermarket wheels special? Our video explains\|tswalloywheels.com This is a video and it shows the rear of a snetterton, which is very similar to pretty much all their wheels. Its right around 1:24, so take a peek and it should tell you if your spacers should work, which again shouldnt be an issue at all.

09-13-2010, 11:16 PM	#13 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 29	One problem with TSW is that they are heavy, my last set was 30lbs a piece for 19x9.5 This is 9.5 with 35mm offset

09-14-2010, 03:15 AM	#15 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	Open ended lug nuts ftw.