The "Will it fit?" thread

[redondoaveb]

My DONK was sitting at about 1-1/4" lower than stock ride height.

[Spooler]

Originally Posted by redondoaveb

My DONK was sitting at about 1-1/4" lower than stock ride height.

I thought you said you could only go 1/2in. lower than stock or you would rub. LMAO.



Here's what you posted:

That's my problem. I can't lower it on 19's, even a smidgen, especially with 35f/30r. With 20's I gain 3/4" in ride height from tires and then I can lower it 3/4" to 1" with suspension and get it back to stock or a smidgen lower than stock ride height. If I stayed at stock ride height with 35f/30r 19's the fender to tire clearance would be huge and really look goofy. Just my opinion. One trade off for another. I can't have the best of both worlds. There are a lot more wheel and tire combos available in 19's, I would much rather be on them. 20's just work better in my situation.

[redondoaveb]

Originally Posted by Spooler

I thought you said you could only go 1/2in. lower than stock or you would rub. LMAO.



Here's what you posted:

That's my problem. I can't lower it on 19's, even a smidgen, especially with 35f/30r. With 20's I gain 3/4" in ride height from tires and then I can lower it 3/4" to 1" with suspension and get it back to stock or a smidgen lower than stock ride height. If I stayed at stock ride height with 35f/30r 19's the fender to tire clearance would be huge and really look goofy. Just my opinion. One trade off for another. I can't have the best of both worlds. There are a lot more wheel and tire combos available in 19's, I would much rather be on them. 20's just work better in my situation.

My suspension was done 2 years ago. I couldn't remember what the specs were. I found my paperwork and it showed 26-3/4". That's about an inch lower than stock ride height. And it did rub and if I backed straight out of my parking spot it would high center. And why are you so concerned about ride height, suspension set up is paramount.