The "Will it fit?" thread

[Carbon]

Finally about to get wheels but want to make sure I'm not going too wide. Driving a 2016 Nissan 370Z nismo with stock 9.5 front and 10.5 back. Would 20x10 front 20x12 back be too much while trying to maintain a flush with the ground set up. Don't know much about offset

[jchammond]

Originally Posted by Carbon

Finally about to get wheels but want to make sure I'm not going too wide. Driving a 2016 Nissan 370Z nismo with stock 9.5 front and 10.5 back. Would 20x10 front 20x12 back be too much while trying to maintain a flush with the ground set up. Don't know much about offset

They will fit; As long as you know your camber settings & what size tires you're gonna be running.....on a 2" stagger wheel (10,12's) (9,11's) etc...offset will be very close to the same on front & rear wheels.
Post your alignment specs & we can help you with offsets

[KamiSpeed]

Originally Posted by Carbon

Finally about to get wheels but want to make sure I'm not going too wide. Driving a 2016 Nissan 370Z nismo with stock 9.5 front and 10.5 back. Would 20x10 front 20x12 back be too much while trying to maintain a flush with the ground set up. Don't know much about offset

What brand / model wheels were you looking at? Caliper clearance on your Akebono brakes is important. Because you may need a spacer depending.

Fronts depending on tire size / camber specs should be around 20x10.0 +22 or higher.

Rear should be around 20x12.0 +20 or higher.

[Carbon]

Originally Posted by KamiSpeed

What brand / model wheels were you looking at? Caliper clearance on your Akebono brakes is important. Because you may need a spacer depending.

Fronts depending on tire size / camber specs should be around 20x10.0 +22 or higher.

Rear should be around 20x12.0 +20 or higher.

I have looking at ROTiform dus

[Guyfromthere]

Hello everyone!

I am super noob about rims. I am looking at getting some Vaarstoen ES222 wheels with Front 19x9.5+22 (255-35-19) Rear 19x10.5+12 (305-30-19). I am worried if I will need spacers to have clearance for Akebono brakes and if I will need to buy anything extra like aftermarket lug nuts and/or studs.

Thanks for replies in advance!

[OptionZero]

Originally Posted by Carbon

Finally about to get wheels but want to make sure I'm not going too wide. Driving a 2016 Nissan 370Z nismo with stock 9.5 front and 10.5 back. Would 20x10 front 20x12 back be too much while trying to maintain a flush with the ground set up. Don't know much about offset

need alot more info if you want any help