The "Will it fit?" thread

ecanela2507 · 11-10-2014, 12:05 AM

I'm thinking about changing to Forgestar F14 19x9.5 with 275/30 or 265/35 front and 19x11 with 305/30 rear. What offset should I go with, I am lowered on swift spring

adkle · 11-14-2014, 06:03 AM

Perhaps a dumb question but would 18x6.5 wheels fit on a base coupe? I found a set of used 225/50/18 winter tires for a good price but they're mounted on 18x6.5 wheels. What are the issues with a much narrower width wheel?

Are 17" wheels possible for the base coupe? What is an appropriate wheel fitment if I go that route? I just want a cheap winter set up. Thanks.

6MT-Z34 · 11-14-2014, 06:26 AM

18x6.5 will not work for the z I believe the lowest u could go is 18x8 or 18x8.5 for the base u might be able to go to 17

Rafiton · 11-21-2014, 01:14 PM

Hi guys:

I got a set of vossen CV2 20x9 and 20x10.5 with offset F (20) and R (15). Im going to buy a set of Michellin PSS 255-35-20 and 295-30-20. The car is going to get lowered on some BC coilovers.

Will I have any problems of rubbing in any aspect with this setup??

I know a person that had a 370Z with a rear wheel 20x11 with 275 stretch as ****, because 295 didn't fit and the 285 was rubbing and in the front he was running 235 because 255 - 245 did't fit. he had 235.

KaienZ34 · 11-21-2014, 01:54 PM

I'm lowered on swifts running MPSS 255/35/19--295/30/19 on Work GS4's 19x9.5+20--19x10.5+0 and pretty much stock camber. No problems at all but swifts are only 1" lower up front and 1.2" in the rear I believe. Your front wheels would retract by 6mm's from my front and the wheel to strut would have 6 more mm's of clearance from mine. The back setup should explain itself retract by 15mm's and have 15mm's less inner clearance but shouldn't be an issue. Now the lower you go the more camber you'll have to run, to clear or you will have to run narrower tires.

I don't have the best pics to show the clearance.

370z209 · 11-26-2014, 11:48 AM

Was looking at a set of wheels someones selling. Wondering if this is an okay setup to run without rolling the fenders or negative camber in the rear. I currently have Swift springs installed.

- Front: 20x9.5 +15
- Rear: 20x11 +5
- Front Tire: 275/30
- Rear Tire: 315/35

Thanks

edub370 · 12-05-2014, 10:15 AM

wondering if my 19x9.5 +41mm tsw's on front can hold a 275/35/19 and not rub? any input would be appreciated

LostSol · 12-05-2014, 10:19 AM

Quote:

Originally Posted by 370z209

Was looking at a set of wheels someones selling. Wondering if this is an okay setup to run without rolling the fenders or negative camber in the rear. I currently have Swift springs installed.

- Front: 20x9.5 +15
- Rear: 20x11 +5
- Front Tire: 275/30
- Rear Tire: 315/35

Thanks

Youll rub front and rear. Need a +25 or so to not rub in the front and +20 or +22 to not rub in the rear with out rolling or camber

Youll also need to do the 35 sidewall in front and 30 in rear.

LostSol · 12-05-2014, 10:25 AM

Quote:

Originally Posted by edub370

wondering if my 19x9.5 +41mm tsw's on front can hold a 275/35/19 and not rub? any input would be appreciated

They should fit the wheel fine, they wont rub on the fender, but the offset is so high they *might* rub on the suspension. Id suggest a 10mm or 15mm spacer, it will look better too

Z34gallore · 12-05-2014, 04:29 PM

Can anybody throw out a solid guess for the wheel specs on this Z?

Array · 12-05-2014, 11:14 PM

I'm sure somewhere in this thread this has been answered however I couldn't find it

Currently running base setup wheels looking into TSW's Interlagos that are
19 X10.5 27 Rear
19 X9.5 41 Front
Both 1 Inch larger and wider

I would be buying new tires as well.. I've heard that perhaps theres an issue with the offset and scraping the wheel well? I've never confirmed this just read in the forums.

Dcocci · 12-05-2014, 11:22 PM

Quote:

Originally Posted by Z34gallore

Can anybody throw out a solid guess for the wheel specs on this Z?

perfect. perfect wheel specs.

Seriously though, an e-mail to SSR could probably answer your question.

Dcocci · 12-05-2014, 11:26 PM

Quote:

Originally Posted by Array

I'm sure somewhere in this thread this has been answered however I couldn't find it

Currently running base setup wheels looking into TSW's Interlagos that are
19 X10.5 27 Rear
19 X9.5 41 Front
Both 1 Inch larger and wider

I would be buying new tires as well.. I've heard that perhaps theres an issue with the offset and scraping the wheel well? I've never confirmed this just read in the forums.

Those offsets would require spacers. The fronts especially would require BIG spacers.

Array · 12-05-2014, 11:34 PM

Quote:

Originally Posted by Dcocci

Those offsets would require spacers. The fronts especially would require BIG spacers.

How much mm spacers would you think? Are we talking as much as 20+?

370z209 · 12-06-2014, 12:09 PM

Quote:

Originally Posted by LostSol

Youll rub front and rear. Need a +25 or so to not rub in the front and +20 or +22 to not rub in the rear with out rolling or camber

Youll also need to do the 35 sidewall in front and 30 in rear.

Sorry, he had the wrong tire specs listed. Here's the right ones.

- Front: 20x9.5 +15
255/35/20

- Rear: 20x11 +5
305/25/20

Would these work okay?

11-21-2014, 01:54 PM	#1025 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	I'm lowered on swifts running MPSS 255/35/19--295/30/19 on Work GS4's 19x9.5+20--19x10.5+0 and pretty much stock camber. No problems at all but swifts are only 1" lower up front and 1.2" in the rear I believe. Your front wheels would retract by 6mm's from my front and the wheel to strut would have 6 more mm's of clearance from mine. The back setup should explain itself retract by 15mm's and have 15mm's less inner clearance but shouldn't be an issue. Now the lower you go the more camber you'll have to run, to clear or you will have to run narrower tires. I don't have the best pics to show the clearance. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

11-26-2014, 11:48 AM	#1026 (permalink)
370z209 Base Member Join Date: May 2014 Location: Bay Area Posts: 114 Drives: 2015 S4, 2015 A3 Rep Power: 10	Was looking at a set of wheels someones selling. Wondering if this is an okay setup to run without rolling the fenders or negative camber in the rear. I currently have Swift springs installed. - Front: 20x9.5 +15 - Rear: 20x11 +5 - Front Tire: 275/30 - Rear Tire: 315/35 Thanks __________________ MEISTERSCHAFT \| SWIFT \| SPL \| WORK\| NISMO \| PROJECT KICS\| AEROJACKET Soon to be for sale: - Muteki 32901N Neon Chrome SR48 Open End and Locking Lug Nuts - Forgestar F14 19" 19x9 ET=21 Semi Concave 19x11 ET=24 Deep Concave

12-05-2014, 10:15 AM	#1027 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 19	wondering if my 19x9.5 +41mm tsw's on front can hold a 275/35/19 and not rub? any input would be appreciated __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official The370Z "Hot Girls with Hot cars" thread NSFW 01.01.09	AK370Z	Gentleman's Club	187	01-12-2011 12:24 AM
why did the thread "Sharing a bad experience with my 370Z" get closed?	TheSnakeJake	Nissan 370Z General Discussions	1	03-26-2010 11:35 PM
Why there isn't a "Monterey Blue"370Z thread?	Devil Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	08-24-2009 01:55 PM
Official "Guess the Stig's Time" Thread	ResIpsa	Nissan 370Z General Discussions	11	07-27-2009 09:45 PM
Official "Nissan 370Z spotted in Japan" Thread	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	120	05-01-2009 09:30 AM

11-10-2014, 12:05 AM	#1021 (permalink)
ecanela2507 Base Member Join Date: Aug 2014 Location: Orlando Posts: 3 Drives: 09 nissan 370z m6 Rep Power: 10	I'm thinking about changing to Forgestar F14 19x9.5 with 275/30 or 265/35 front and 19x11 with 305/30 rear. What offset should I go with, I am lowered on swift spring

11-14-2014, 06:03 AM	#1022 (permalink)
adkle Base Member Join Date: Nov 2014 Location: Canada Posts: 1 Drives: 14 370Z MB M6 Rep Power: 10	Perhaps a dumb question but would 18x6.5 wheels fit on a base coupe? I found a set of used 225/50/18 winter tires for a good price but they're mounted on 18x6.5 wheels. What are the issues with a much narrower width wheel? Are 17" wheels possible for the base coupe? What is an appropriate wheel fitment if I go that route? I just want a cheap winter set up. Thanks.

11-14-2014, 06:26 AM	#1023 (permalink)
6MT-Z34 A True Z Fanatic Join Date: Jan 2013 Location: NJ Posts: 1,726 Drives: PW Z Rep Power: 15	18x6.5 will not work for the z I believe the lowest u could go is 18x8 or 18x8.5 for the base u might be able to go to 17

11-21-2014, 01:14 PM	#1024 (permalink)
Rafiton Base Member Join Date: Oct 2012 Location: Puerto Rico Posts: 25 Drives: 13-370Z-CG- M^ Rep Power: 12	Hi guys: I got a set of vossen CV2 20x9 and 20x10.5 with offset F (20) and R (15). Im going to buy a set of Michellin PSS 255-35-20 and 295-30-20. The car is going to get lowered on some BC coilovers. Will I have any problems of rubbing in any aspect with this setup?? I know a person that had a 370Z with a rear wheel 20x11 with 275 stretch as ****, because 295 didn't fit and the 285 was rubbing and in the front he was running 235 because 255 - 245 did't fit. he had 235.

12-05-2014, 04:29 PM	#1030 (permalink)
Z34gallore Base Member Join Date: Nov 2014 Location: Torrance, CA Posts: 18 Drives: 370z veryracingRED Rep Power: 10	Can anybody throw out a solid guess for the wheel specs on this Z?

12-05-2014, 11:14 PM	#1031 (permalink)
Array Enthusiast Member Join Date: Jun 2014 Location: home.jpg Posts: 286 Drives: '12 Pearly White Rep Power: 10	I'm sure somewhere in this thread this has been answered however I couldn't find it Currently running base setup wheels looking into TSW's Interlagos that are 19 X10.5 27 Rear 19 X9.5 41 Front Both 1 Inch larger and wider I would be buying new tires as well.. I've heard that perhaps theres an issue with the offset and scraping the wheel well? I've never confirmed this just read in the forums.