370Z With TE37V mark II

valleyZ · 08-02-2017, 05:06 PM

I tried searching and couldn't find a 370z with these wheels. does anybody know if somebody on here has ran these wheels on the Z.

cooltoy · 08-02-2017, 06:09 PM

Any reason why they would look any different then all the rest of TE37 wheels?

valleyZ · 08-02-2017, 06:17 PM

Quote:

Originally Posted by cooltoy

Any reason why they would look any different then all the rest of TE37 wheels?

these are a deep step lip wheel compared to the other te37. google them and you will see what i'm talking about.

OptionZero · 08-02-2017, 06:32 PM

Yes.

The TE37V Mk II is a version that features massive lip and a relatively flatter face. The sizing has zero or negative offsets and goes up to 18 inch.

It is intended for widebody cars and/or older cars like 86, Datsuns, etc.

The sizing isn't really intended for 370Z because it only goes up to 18 inch and most Z's run 19/20

Also, given the aggressive offsets, it makes even less sense to run on a Z.

If you are going negative offset on wheels, you're going widebody, if you're going widebody, there's very little reason to go 18

OptionZero · 08-02-2017, 06:34 PM

Link to Rays' website:
https://www.rayswheels.co.jp/product...=TE37V_MARK-II

Sizing ranges from 18x9 +8 to 18x22 -33 (negative 33)

Example:

Contrast with TE37 ULTRA in 19/20, which has concave faces and little lip

Note that the TE37SL is done, and the regular TE37 has been done for a while.

Rays is going forward with TE37 variants that have engravings on the faces to prevent knockoffs

ULTRA: machined ring + logo for 19/20 inch
ULTRA TOURER: same, but with more lip, limit sizes in 20
SAGA: machined logo, 18 inch, super concave

cooltoy · 08-02-2017, 06:44 PM

Quote:

Originally Posted by valleyZ

these are a deep step lip wheel compared to the other te37.

I knew that, but other then that, they still look like TE37.

Quote:

Originally Posted by valleyZ

google them and you will see what i'm talking about.

He said to the king of the search.

cooltoy · 08-02-2017, 06:45 PM

Quote:

Originally Posted by OptionZero

Yes.

The TE37V Mk II is a version that features massive lip and a relatively flatter face. The sizing has zero or negative offsets and goes up to 18 inch.

It is intended for widebody cars and/or older cars like 86, Datsuns, etc.

The sizing isn't really intended for 370Z because it only goes up to 18 inch and most Z's run 19/20

Also, given the aggressive offsets, it makes even less sense to run on a Z.

If you are going negative offset on wheels, you're going widebody, if you're going widebody, there's very little reason to go 18

As I figured.

valleyZ · 08-02-2017, 07:12 PM

Quote:

Originally Posted by OptionZero

Yes.

The TE37V Mk II is a version that features massive lip and a relatively flatter face. The sizing has zero or negative offsets and goes up to 18 inch.

It is intended for widebody cars and/or older cars like 86, Datsuns, etc.

The sizing isn't really intended for 370Z because it only goes up to 18 inch and most Z's run 19/20

Also, given the aggressive offsets, it makes even less sense to run on a Z.

If you are going negative offset on wheels, you're going widebody, if you're going widebody, there's very little reason to go 18

plenty of Z run 18" wheels and they offer 18x9.5 and 18x10.5 in 15 offset so i wanted to see what they would like like on a 370z.

and i dont believe you have to be wide body unless im misreading the sizing. I ran a +22 front +12 rear so the +15 should be very possible without being wide body.

just asking a simple question if anybody has ran these wheels thats it

cooltoy · 08-02-2017, 08:00 PM

Check with RavSpec to see if the have any pics.

new RAYS VOLK Racing TE37V -- 18" Step Lip + Low Offset + Concave

And if you have not looked through this thread:

Official VOLK 370Z Thread: POST UM UP!

Hotrodz · 08-03-2017, 12:18 PM

I will just post these here for conversation sake TE37SL 18x11 +18.

Sent from my SM-N910P using Tapatalk

Waiz · 08-11-2017, 09:04 PM

I have yet to see them on a Z34, according to the Rays website under the sizing section these wheels are Z34 compatible but I would caution to make sure they are Akebono friendly

Quote:

Originally Posted by OptionZero

Link to Rays' website:
https://www.rayswheels.co.jp/product...=TE37V_MARK-II

Sizing ranges from 18x9 +8 to 18x22 -33 (negative 33)

Example:

Contrast with TE37 ULTRA in 19/20, which has concave faces and little lip

Note that the TE37SL is done, and the regular TE37 has been done for a while.

Rays is going forward with TE37 variants that have engravings on the faces to prevent knockoffs

ULTRA: machined ring + logo for 19/20 inch
ULTRA TOURER: same, but with more lip, limit sizes in 20
SAGA: machined logo, 18 inch, super concave

good info

These wheels were previously only in the smaller sizes suited for older cars as you stated. I did not know they were going to make them in larger sizes

Quote:

Originally Posted by Hotrodz

I will just post these here for conversation sake TE37SL 18x11 +18.

Sent from my SM-N910P using Tapatalk

Your sizing doesn't apply for this wheel, this is a completely different design with vastly different caliper clearance

Nice wheels though

Hotrodz · 08-11-2017, 10:07 PM

Quote:

Originally Posted by Waiz

I have yet to see them on a Z34, according to the Rays website under the sizing section these wheels are Z34 compatible but I would caution to make sure they are Akebono friendly

good info

These wheels were previously only in the smaller sizes suited for older cars as you stated. I did not know they were going to make them in larger sizes

Your sizing doesn't apply for this wheel, this is a completely different design with vastly different caliper clearance

Nice wheels though

Understood!

Sent from my SM-N910P using Tapatalk

NextLevel · 11-13-2017, 07:44 AM

We have a client going widebody that ordered these wheels. They took exactly 11 months to get here, car is currently under the knife right now. I'll share photos when it's finished~

08-02-2017, 05:06 PM	#1 (permalink)
valleyZ Enthusiast Member Join Date: Jan 2016 Location: sun valley Posts: 303 Drives: 10 370z Nismo Rep Power: 9	370Z With TE37V mark II I tried searching and couldn't find a 370z with these wheels. does anybody know if somebody on here has ran these wheels on the Z.

08-02-2017, 06:09 PM	#2 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,938 Drives: 14 PW 370Z S/T MT Rep Power: 240204	Any reason why they would look any different then all the rest of TE37 wheels? __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

08-02-2017, 06:32 PM	#4 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,160 Drives: 15 370Z Nismo 6MT Rep Power: 203226	Yes. The TE37V Mk II is a version that features massive lip and a relatively flatter face. The sizing has zero or negative offsets and goes up to 18 inch. It is intended for widebody cars and/or older cars like 86, Datsuns, etc. The sizing isn't really intended for 370Z because it only goes up to 18 inch and most Z's run 19/20 Also, given the aggressive offsets, it makes even less sense to run on a Z. If you are going negative offset on wheels, you're going widebody, if you're going widebody, there's very little reason to go 18 cooltoy, Stright_Drop and Memphis370Z like this. __________________ OptionZero Build Thread

08-02-2017, 06:34 PM	#5 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,160 Drives: 15 370Z Nismo 6MT Rep Power: 203226	Link to Rays' website: https://www.rayswheels.co.jp/product...=TE37V_MARK-II Sizing ranges from 18x9 +8 to 18x22 -33 (negative 33) Example: Contrast with TE37 ULTRA in 19/20, which has concave faces and little lip Note that the TE37SL is done, and the regular TE37 has been done for a while. Rays is going forward with TE37 variants that have engravings on the faces to prevent knockoffs ULTRA: machined ring + logo for 19/20 inch ULTRA TOURER: same, but with more lip, limit sizes in 20 SAGA: machined logo, 18 inch, super concave __________________ OptionZero Build Thread Last edited by OptionZero; 08-02-2017 at 06:36 PM.

08-02-2017, 08:00 PM	#9 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,938 Drives: 14 PW 370Z S/T MT Rep Power: 240204	Check with RavSpec to see if the have any pics. new RAYS VOLK Racing TE37V -- 18" Step Lip + Low Offset + Concave And if you have not looked through this thread: Official VOLK 370Z Thread: POST UM UP! Hotrodz likes this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

08-03-2017, 12:18 PM	#10 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	I will just post these here for conversation sake TE37SL 18x11 +18. Sent from my SM-N910P using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

11-13-2017, 07:44 AM	#13 (permalink)
NextLevel Banned Join Date: Apr 2017 Location: Midwest Posts: 108 Drives: Motorweek#0021 Nismo Rep Power: 0	We have a client going widebody that ordered these wheels. They took exactly 11 months to get here, car is currently under the knife right now. I'll share photos when it's finished~ TerribleONE likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new RAYS VOLK Racing TE37V -- 18" Step Lip + Low Offset + Concave	RavSpec	Wheels & Tires	6	02-03-2016 07:41 AM
WTB: Any 370Z's out there near the 20K mark? DC area	ZNation	Wanted	4	01-11-2012 07:01 PM
FS: Canon 1DS Mark II SLR Body	Mr Chaz Tsai	Misc Items for sale (No Z stuff)	9	09-02-2011 02:04 PM
WTS: Mark Antony amp	base64	Misc Items for sale (No Z stuff)	1	06-15-2010 03:43 PM
Mark Sanchez needs your help to raise $100,000 for JDRF text MARK!	G2FAST	Southern California Region	0	02-04-2010 11:56 PM