Need help deciding which color Volks

cooltoy

They +12 but running 10 mm spacer in the rear so +2. Fronts are 245/40/19 rears are 275/35/19.

__________________

cooltoy

Official Wheel Weight Thread.

__________________

KamiSpeed

Weights on the OG TE37

19x9.5 +22 | 21.2 lbs
19x10.5 +12 | 22.2 lbs

Weights on TE37 Ultra

19x9.5 +22 | 22.8 lbs
19x10.5 +12 | 23.2 lbs

Just to give you guys an idea

__________________

littlejuanito

I would have thought the ultras were lighter. Go figure.

__________________
Fast Intentions Non-Resonated Carbon Fiber CBE | Berk Non-Resonated HFC | Powertrix Coilovers | RJM Clutch Pedal | LatheWerks Shift Knob | Stillen Sway Bars, |SPL Parts | Enkei RS05RR | Fujimura Diffuser | Ecutek Tuned by Seb | 308whp

OptionZero

i dont think the 1-inch/1-lb rule that Honda's and other smaller cars use will apply when dealing with RWD widths

and if u care about weight, get the "track" version which shaves a bit more weight (but only come in diamond dark gunmetal)

or if u "really" need the weight savings (you don't, you're not a racecar driver), get some CE28n's

obsession over wheel weight on a street car is hilarious to me

__________________
OptionZero Build Thread

cooltoy

__________________

littlejuanito

Now I'm on the fence between the Bronze color and this cool looking Flat Black. Cant seem to decide which one to with it. I love the classic look of the bronze but it seems that everyone with a Magma Red Z have them. I also love the look of this Flat Black but will take about 3 months to receive. Decisions, decisions

cooltoy

Probably because it looks right with magma red.

__________________

littlejuanito

Yes, I'm not arguing that. Bronze does look great with the Magma Red that's why I'm torn between these two color options.

__________________
Fast Intentions Non-Resonated Carbon Fiber CBE | Berk Non-Resonated HFC | Powertrix Coilovers | RJM Clutch Pedal | LatheWerks Shift Knob | Stillen Sway Bars, |SPL Parts | Enkei RS05RR | Fujimura Diffuser | Ecutek Tuned by Seb | 308whp

ChaseZ

I REALLY dig the matte bronze TE37's on Magma. Does the finish have a life expectancy for being in vogue? Sure, but powder coat is cheap whenever that time comes.

OptionZero

I have flat black. Took 5 months for me (special order color not stocked)

Sadly in the 19 inch Ultra, it's a regular color and stocked by Mackin

Look at my build thread for pix how it looks on white

I actually think Bronze is a better complement on a red car. Gold is even better - if you're going to wait on a special color, might as well get gold

__________________
OptionZero Build Thread

littlejuanito

Your Nismo looks great. And definitively black is the way to go on a white car. Those Ultras compliment your ride really well

__________________
Fast Intentions Non-Resonated Carbon Fiber CBE | Berk Non-Resonated HFC | Powertrix Coilovers | RJM Clutch Pedal | LatheWerks Shift Knob | Stillen Sway Bars, |SPL Parts | Enkei RS05RR | Fujimura Diffuser | Ecutek Tuned by Seb | 308whp

VQZ34

My brother Got this color on special he said it was called diamond black, color looks wet all the time!! 8 months wait tho lol order

Sent from my SM-G930T using Tapatalk

Halfkiddio

Volk Bronze is an anodized finish. Good luck finding that in a powdercoat lol.

littlejuanito

Well... after much debate between two color choices, I finally made my decision and pulled the trigger on the OG Bronze Volks advertised on the Kamispeed group buy. Big thanks to Saku at Kamispeed and thanks to those of you that suggested these as well.

Next stop.... Tireville! Pole S-04, RE-11 or Michellin PSS ?

__________________
Fast Intentions Non-Resonated Carbon Fiber CBE | Berk Non-Resonated HFC | Powertrix Coilovers | RJM Clutch Pedal | LatheWerks Shift Knob | Stillen Sway Bars, |SPL Parts | Enkei RS05RR | Fujimura Diffuser | Ecutek Tuned by Seb | 308whp