Spacer options

antennahead · 11-05-2009, 05:12 PM

Quote:

Originally Posted by theDreamer

If you went 20mm what would you do for the fronts then? Just 10mm?
I was thinking of going 20mm in the rears and either 5 or 10mm in the fronts, though I might just do 15mm in the rear and 5mm in the front...hmmm.

I'd say 20 and 10, or 15 and 5. The fronts don't have near as much of that "sucked in" look in factory form, as the rears do. So to me, 15 rear and no front was ok. It's a personal preference thing, others want the fronts out as well. With 15 on the rear, the car has a muscle look to it now in my opinion. Whatever floats your boat

John

theDreamer · 11-05-2009, 05:13 PM

You have a picture of yours with just 15s?
I have seen a few on here with 15 & 5 but no one has done just 15 in the rears, you might have a winner.

cptspeed · 11-05-2009, 05:14 PM

I had 15's in front, 20's in the rear. rays wheels, stock susp. Looks perfect. Am waiting to find out how the h&r fronts work before I buy new ones.

cptspeed · 11-05-2009, 05:17 PM

Currently running the 20's outback. none in the front. looks good, but missing the fronts.

antennahead · 11-05-2009, 08:57 PM

Quote:

Originally Posted by theDreamer

You have a picture of yours with just 15s?
I have seen a few on here with 15 & 5 but no one has done just 15 in the rears, you might have a winner.

Not my car, but the same thing, 15mm rear only.

TipsZ · 11-06-2009, 08:33 AM

So CptSpeed, did you ever determine what the cause of the vibration in the fronts were from? I know you are no longer running the spacers in the front, however I was thinking of putting either 5 or 10 in the front and 20 in the back. Again, I would like more info from experienced users before I make the purchase.

cptspeed · 11-06-2009, 08:55 AM

waiting on Mike, who had the same prob to install his H&R's. Still believe its the spacers.

Mike · 11-06-2009, 11:07 AM

well, I finally heard back from my wholesale source, and they can't get them for me, but I did actually order them elsewhere today. Will advise when they arrive.

cptspeed · 11-06-2009, 04:19 PM

thanks for responding. Can't wait to get those fronts on mine again.

11-05-2009, 05:13 PM	#32 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	You have a picture of yours with just 15s? I have seen a few on here with 15 & 5 but no one has done just 15 in the rears, you might have a winner. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

11-06-2009, 08:33 AM	#36 (permalink)
TipsZ Track Member Join Date: Mar 2009 Location: Lithia, FL Age: 50 Posts: 552 Drives: 09 Nissan 370z CS M6 Rep Power: 186	Vibration So CptSpeed, did you ever determine what the cause of the vibration in the fronts were from? I know you are no longer running the spacers in the front, however I was thinking of putting either 5 or 10 in the front and 20 in the back. Again, I would like more info from experienced users before I make the purchase. __________________ Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics TipsZ journal

11-06-2009, 11:07 AM	#38 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	well, I finally heard back from my wholesale source, and they can't get them for me, but I did actually order them elsewhere today. Will advise when they arrive. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Oil Pan Spacer	wstar	DIY Section (Do-It-Yourself)	44	04-23-2018 07:22 AM
Plenum spacer anyone???	john370z	Intake/Exhaust	13	03-27-2010 11:02 AM
Ok - So howcome there are no spacer talks for the Z?	shabarivas	Intake/Exhaust	6	08-25-2009 02:06 PM
15mm or 20mm Spacer? PICS	MoBounce	Wheels & Tires	12	08-16-2009 06:54 PM
intake spacer?	black09Z	Intake/Exhaust	1	04-01-2009 01:55 PM

11-05-2009, 05:14 PM	#33 (permalink)
cptspeed Track Member Join Date: Jul 2009 Location: tampa Posts: 799 Drives: 09 370z Rep Power: 16	I had 15's in front, 20's in the rear. rays wheels, stock susp. Looks perfect. Am waiting to find out how the h&r fronts work before I buy new ones.

11-05-2009, 05:17 PM	#34 (permalink)
cptspeed Track Member Join Date: Jul 2009 Location: tampa Posts: 799 Drives: 09 370z Rep Power: 16	Currently running the 20's outback. none in the front. looks good, but missing the fronts.

11-06-2009, 08:55 AM	#37 (permalink)
cptspeed Track Member Join Date: Jul 2009 Location: tampa Posts: 799 Drives: 09 370z Rep Power: 16	waiting on Mike, who had the same prob to install his H&R's. Still believe its the spacers.

11-06-2009, 04:19 PM	#39 (permalink)
cptspeed Track Member Join Date: Jul 2009 Location: tampa Posts: 799 Drives: 09 370z Rep Power: 16	thanks for responding. Can't wait to get those fronts on mine again.