UpRev to help with passing inspection?

theDreamer

Look at ANMVQ post, you need correct extenders so the system reads correctly.
Uprev "could" help by tuning the car and see if brings it back inline so it does not throw the code while trying to leave on the sensors but not 100% guarantee.

__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN
theDreamer's Silvia // URAS // GREDDY
Houston Zs // Facebook // Twitter // Instagram

wdkwang

I found that extenders wouldn't do anything in my particular case with the pos Motordyne V1 pipes. You'll see in my posted thread in the past that the o2 bongs are completely covered up with metal for reasons I do not know (Warning do not buy Motordyne products).
I feel like I'm in a bit of a bind.

__________________
Powerhouse Amuse | K&N Typhoon Intakes | MotorDyne ART Pipes | Borla Catback Exhaust | B&M Short Shifter | Intake Ducts | Ichiba 25mm F/R Spacers | Carbon Fiber Interior Vinyl Wrap | Tints | 10000k HIDs | Vtak, yo!

thangcu35

The metal wires in there is to reduce the amount of exhaust reading at the sensor. Seriously, buy o2 defoulers $3 each at any autozone or advance auto parts install and watch the code disappear for good. Some cars require different defouler length to correctly offset the o2 readings.

Edit. Just saw the pics in your other thread. I dont know why it was completely shut off from the bung either. It shouldnt be like that. My guess is they forgot to drill a hole before welding on the o2 bung