things to do before dyno day

Jordo! · 11-28-2013, 05:30 AM

Quote:

Originally Posted by Vnismo370z

I lose about a quart a change... Thanks you guys! Also new oil thread!!! Now to buy some redline... also OEM filter good enough?

A loot of folks here like the K&N filter -- I use that one myself, FWIW

part number for the K&N oil filter is HP-1008

synolimit · 11-28-2013, 05:40 AM

Quote:

Originally Posted by Vnismo370z

I lose about a quart a change... Thanks you guys! Also new oil thread!!! Now to buy some redline... also OEM filter good enough?

Wow. Sad.

The OEM filter uses cardboard inner stuff. Ok for 3k I'd guess. Never had issues with my WRX running 115 more HP than stock. Now I use Puro 1 yellow filter. It has steel inner stuff.

synolimit · 11-28-2013, 05:50 AM

Quote:

Originally Posted by Riptide67

I had a lil over 33k on my Z when I did UpRev. Drove my car for about 1,000 miles with FI exhaust, ART pipes, pulley, and G3's. I had Intec Racing check my plugs and they were ****. I had them changed out.

I didn't do my oil though since I had only put about 1,700 miles on the car since purchase. So the oil was still decent.

They were ****? Or they tell you they were ****? Big difference. I highly doubt they were ****. They are the most expensive plugs on the market with the best metals. And from data logging my car with cai, LTH, CBE, they look amazing!! Little rich WOT in the upper rpms, but nothing to hurt a plug. My WRX ran a full 1.0 richer at WOT and were fine. Unless they changed the tune in 13, I'm sure your logs were ok too.

synolimit · 11-28-2013, 05:56 AM

Quote:

Originally Posted by Jordo!

Yes the 0 wt. oil.

Eh... you might want to check the TSB on oil consumption. I don't know what role the particular oil you used played a role (if any), but this is a known problem that crops up from time to time...

Well thinner oil will leak past the valve seals and piston rings and get burned up in combustion. This is why RL says their oil is like a full 10w higher than others with the same numbers. If its a bad oil or left in to long, then you scare the walls and such leading to more leaking. Guys with over a 1qt per 1-3k have done something wrong. Subi was an issue because all turbos leak a little and the M1 just shoots by. I'd have to compare 5w30 and euro to see a difference. I ran 5w40 RL in the subi to lose zero over 3-4k. That's like a 5w50 M1.

COSMO · 11-28-2013, 08:44 AM

Make sure the tuner has a Knock Sensor!!!!!!!!!!!!!!!!!!!!

synolimit · 11-28-2013, 09:10 AM

Quote:

Originally Posted by cosmogirl

Make sure the tuner has a Knock Sensor!!!!!!!!!!!!!!!!!!!!

Ummm what? What car doesn't have a knock sensor and in the ecu definitions, fine learning knock correction and knock correction advance??

visconti · 11-28-2013, 09:38 AM

Quote:

Originally Posted by synolimit

Ummm what? What car doesn't have a knock sensor and in the ecu definitions, fine learning knock correction and knock correction advance??

Don't confuse yourself with Subaru stuff!

But yes the Nissan has a knock sensor and the right tuning tools will tell you what's going on

Sent from my iPhone using Tapatalk

COSMO · 11-28-2013, 09:41 AM

Trust me or not but any good tuner should have a knock sensor while dynoing a car.

visconti · 11-28-2013, 09:47 AM

Quote:

Originally Posted by cosmogirl

Trust me or not but any good tuner should have a knock sensor while dynoing a car.

Not trying to argue with you but any tuner that has experience can certainly do without aftermarket knock sensors.

That being said , I have a set of really nice ones but I very rarely use then. Used it on my 650whp STi and a few crazy GTRs when I first started working on them.

John

Sent from my iPhone using Tapatalk

Vnismo370z · 11-28-2013, 09:54 AM

Well, obviously I never built a car. Ever. This is my first build. Expensive start but hopefully it will eliminate stupid decisions; which is why I am here to ask the questions and learn from mistakes and not pull the same stuff others have. Thank you guys for all of your advice.

As for losing about a quart a change well, Mobil apparently is crap oil, if I would have known better earlier in my money pits life span things would have been different. Regardless, learn me the ways of not sucking at cars.

synolimit · 11-28-2013, 10:11 AM

Quote:

Originally Posted by visconti

Don't confuse yourself with Subaru stuff!

But yes the Nissan has a knock sensor and the right tuning tools will tell you what's going on

Sent from my iPhone using Tapatalk

Thought so. FKA, FKL...I'm sure all modern OBD2 cars have something vs. Going aftermarket.

synolimit · 11-28-2013, 10:17 AM

Quote:

Originally Posted by Vnismo370z

Well, obviously I never built a car. Ever. This is my first build. Expensive start but hopefully it will eliminate stupid decisions; which is why I am here to ask the questions and learn from mistakes and not pull the same stuff others have. Thank you guys for all of your advice.

As for losing about a quart a change well, Mobil apparently is crap oil, if I would have known better earlier in my money pits life span things would have been different. Regardless, learn me the ways of not sucking at cars.

It's not crap, just not ideal in all cars/motors. My/wife's merc c300 has euro M1 0w40 in it and doesn't burn a drop. It's got 5-6k on the oil now and it's still showing full. The car isn't raced or anything and I don't believe the motor runs hot so M1 is fine for this particular car.

Riptide67 · 11-28-2013, 02:04 PM

Quote:

Originally Posted by synolimit

They were ****? Or they tell you they were ****? Big difference. I highly doubt they were ****. They are the most expensive plugs on the market with the best metals. And from data logging my car with cai, LTH, CBE, they look amazing!! Little rich WOT in the upper rpms, but nothing to hurt a plug. My WRX ran a full 1.0 richer at WOT and were fine. Unless they changed the tune in 13, I'm sure your logs were ok too.

No, I visually inspected the plugs myself and they were awful. Which may have been caused by a mix of wrong fuel usage by original owner and the mods.

Rusty · 11-28-2013, 05:08 PM

Quote:

Originally Posted by synolimit

It's not crap, just not ideal in all cars/motors. My/wife's merc c300 has euro M1 0w40 in it and doesn't burn a drop. It's got 5-6k on the oil now and it's still showing full. The car isn't raced or anything and I don't believe the motor runs hot so M1 is fine for this particular car.

Been using M1 5w30 for awhile. Haven't burned a drop of it.

My Z doesn't use oil thank god.

Last oil change I which over to the Euro M1 0w40.

TerribleONE · 11-28-2013, 06:22 PM

Quote:

Originally Posted by Rusty

Been using M1 5w30 for awhile. Haven't burned a drop of it.

My Z doesn't use oil thank god.

Last oil change I which over to the Euro M1 0w40.

I am running M1 0W40 as well.

11-28-2013, 09:54 AM	#40 (permalink)
Vnismo370z Enthusiast Member Join Date: Nov 2011 Location: Tacoma, Wa Posts: 387 Drives: '15 370z PG Sport Rep Power: 15	Well, obviously I never built a car. Ever. This is my first build. Expensive start but hopefully it will eliminate stupid decisions; which is why I am here to ask the questions and learn from mistakes and not pull the same stuff others have. Thank you guys for all of your advice. As for losing about a quart a change well, Mobil apparently is crap oil, if I would have known better earlier in my money pits life span things would have been different. Regardless, learn me the ways of not sucking at cars. __________________ starting over

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Things not to do to your Z	eXo5	Nissan 370Z General Discussions	181	03-28-2018 11:25 PM
Kaizen tuning installes Dyno Dynamics Dyno	Kaizen Tuning	Kaizen Tuning	2	03-24-2014 01:22 PM
What are these things?	homeryansta	Nissan 370Z General Discussions	15	05-27-2012 03:40 PM
Forged Performance - Dyno Day July 17th. $40.00 dyno, Free Food & Drinks	Tray@Forged	South East Region	42	07-28-2010 06:53 PM
Dyno quirks - three cars with mods and no gains show on dyno, gotta be the heat!	'10Anamoly	Intake/Exhaust	25	07-26-2010 10:26 PM

11-28-2013, 08:44 AM	#35 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 21	Make sure the tuner has a Knock Sensor!!!!!!!!!!!!!!!!!!!!

11-28-2013, 09:41 AM	#38 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 21	Trust me or not but any good tuner should have a knock sensor while dynoing a car.