Going back on 2 dyno tomorrow (Dynapack & Dynojet)

Megan370z · 12-02-2011, 02:46 PM

Quote:

Originally Posted by indyn

good numbers man, similar to power made my few NA 370z's on board, does it pull hard now?

did the overbored TB and custom CAI help?

it does pull quite harder than what it was for the pass year ...

as for the oversized TB and CAI , yes it did help getting power from the dyno graph I got earlier this year even if the car was apparently running of the knock timing map.
My baseline(fully stock) on the dynapack was 256whp up to 324whp *SAE* . this is quite an improvement , but I was expecting to see a bigger number on the dynojet.

I'm planing to go back on the same dynojet next March/April for some test again with the HR intake manifold and the OEM one.

indyn · 12-05-2011, 12:20 PM

wow. thats without the HR manifold? Not sure about the HP gains but I'm sure you'll torque will see a big bump.

where did you get your tb rebored?

Megan370z · 12-05-2011, 06:25 PM

Quote:

Originally Posted by indyn

wow. thats without the HR manifold? Not sure about the HP gains but I'm sure you'll torque will see a big bump.

where did you get your tb rebored?

my last dyno day with the dynapack and dynojet was with the HR intake manifold

I just want to do a proper test with the dynojet with and without the HR manifold.. !

but im gonna have to redo some spot on the MAF table and fuel comp. because as soon as I installed the HR intake manifold back on the Z ... the afr was all over the place !!

so its making 2 tune for each mod before going on the dyno and not waste too much $$ dyno time.

as for the TB ,, I had a shop in toronto doing the job and some tweak done on the shaft and buttlefly plate

andre12031948 · 12-05-2011, 06:48 PM

2 summers ago I went to one of those 3 pulls for $50 + food things. I made 276Hp, 279hp & 282hp on my last pull. No mods were changed. What did I learn? Bapkis (sp

(French

Making changes at the track helped me the most.

View Poll Results: What is gonna be my max whp on the Dynojet ?
280-290 whp	2	16.67%
290-300 whp	0	0%
300-310 whp	2	16.67%
310-320 whp	7	58.33%
320++whp !!	1	8.33%
Voters: 12. You may not vote on this poll

12-05-2011, 06:48 PM	#19 (permalink)
andre12031948 Banned Join Date: Feb 2011 Location: monticello new york 127 Posts: 1,095 Drives: 08 350z black 6m/t Rep Power: 0	2 summers ago I went to one of those 3 pulls for $50 + food things. I made 276Hp, 279hp & 282hp on my last pull. No mods were changed. What did I learn? Bapkis (sp(French Making changes at the track helped me the most.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Getting Tanabe cat back tomorrow	DrEvil	Intake/Exhaust	10	02-25-2011 08:19 AM
FS: Stillen CBE - Cat Back Exhaust - 2 Months Old - 20+ Dyno Proven HP!!!	Push370zzz	Parts for sale (Private Classifieds)	21	12-05-2010 04:20 PM
Stock dynojet dyno sheet in computer format?	cossie1600	Engine & Drivetrain	2	09-26-2010 01:56 AM
Just got back from the Dyno - 256WHP & 204WTQ.	RCZ	Engine & Drivetrain	11	03-10-2009 10:15 PM

12-05-2011, 12:20 PM	#17 (permalink)
indyn Base Member Join Date: Apr 2011 Location: farr north Posts: 241 Drives: 11 BMW 335i 6AT Rep Power: 14	wow. thats without the HR manifold? Not sure about the HP gains but I'm sure you'll torque will see a big bump. where did you get your tb rebored?