![]() |
My car would knock at the exact same rpm, in the same gear everytime, no matter what fuel was in it (even E100), or timing used. All the logs showed
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#8 (permalink) |
Track Member
Join Date: Oct 2016
Location: OKC
Posts: 809
Drives: 2010 touring
Rep Power: 7842 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
My car would knock at the exact same rpm, in the same gear everytime, no matter what fuel was in it (even E100), or timing used. All the logs showed the same knock at the same point. This is engine noise picked up by the knock transducers.
Based on this data, I was convinced it was ghost knock. I had the tuner raise the threshold on knock detection and been happy ever since. I have had the engine light flash (mil gauge highjack knock indicator) a couple times on 89 cheap gas when pulling away from a stoplight with light throttle. If I see that, I pull timing on the oil temp gauge with the cruise toggle, and go add some 93 oct.
__________________
NA on E85 - 12.402 @ 112 mph 100 shot E85 - 11.589 @ 117 mph JWT C2 cams rev Base Circle & Titan Valves |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
CAN logs | dts3 | DIY Section (Do-It-Yourself) | 1 | 07-19-2019 10:29 PM |
AFR from uprev data logs vs wideband readings | Jinxx | Tuning | 0 | 02-10-2019 06:33 PM |
ECUTek Logs | MoulaZ | Tuning | 4 | 03-05-2017 11:52 PM |
Data Logs | ANMVQ | Tuning | 1 | 10-29-2014 06:05 PM |
WANTED: your logs | juld0zer | Tuning | 1 | 08-23-2014 07:50 PM |