Knock warning after ecutek tune

Elmo370z · 02-06-2019, 12:49 PM

Quote:

Originally Posted by mag_black

no, the issue is still there. I get it from time to time. I try not to drive it at such low rpm lol. Kind of sucks. I still get the cruise light flashing and not being able to change maps as well.

https://uprev.com/documentation/Knoc...n%20Device.pdf

With this you can listen and see if your car is truly knocking. Forum member here has installed it and it working fine. Now a true safe way to desensitize the knock sensors.

mag_black · 02-06-2019, 12:49 PM

Quote:

Originally Posted by Quicksilvers

One thing that was not said here is Nissan highly recommends only using “top tier” gasoline in all of their model vehicles. It is crucial what gasoline you use with the ECUTEK and UpRev tunes for our Z’s. Also if you use generic additive low quality gasoline pinging or detonation can and will happen. People getting a ECUTEK or UpRev tune on any Z need to clarify how they want their tune done before hand.

I strictly use 93 Shell or Mobil. Never anything else.

ByThaBay · 02-06-2019, 12:51 PM

Quote:

Originally Posted by mag_black

no, the issue is still there. I get it from time to time. I try not to drive it at such low rpm lol. Kind of sucks. I still get the cruise light flashing and not being able to change maps as well.

Pm me I’ll help you analyze it and resolve it.

mag_black · 02-06-2019, 12:51 PM

Quote:

Originally Posted by Quicksilvers

One thing that was not said here is Nissan highly recommends only using “top tier” gasoline in all of their model vehicles. It is crucial what gasoline you use with the ECUTEK and UpRev tunes for our Z’s. Also if you use generic additive low quality gasoline pinging or detonation can and will happen. People getting a ECUTEK or UpRev tune on any Z need to clarify how they want their tune done before hand.

Quote:

Originally Posted by Jhill

So probably need a little more information on this. Like was it doing this recently after a tune or had it been a lot of miles? What’s your normal driving like, aggressive or mild? Have you actually done some logs and seen just how far out the ignition correction is?

I was starting to get some occurrences as well under part throttle and a decent load like a steady incline and also some occurrences between a 1-2 shift with 7 AT. Most of my driving is pretty mild on the street (I need my license for work and can’t risk being stupid) and it’s been a while since I’ve had a track day. Anyhow mine has cleared up after using some amsoil p1 injector cleaner (which is basically a valve cleaner, other brands have the same stuff) doing a long trip to so cal and some mild pulls where I could, also I added a catch can setup as any oil in the intake system will lower the effective octane rating. This has seemed to clear up the part throttle medium load and has only had minor occurrences over something like the grapevine in summer (steep, high altitude and hot). The 1-2 shift occurrences were cleared up with z1 poly diff kit. Haven’t had an occurrence since however I did all this right before the weather started getting milder (was still summer just not mid summer), so I won’t really know 100% until mid summer again.

In my case with mild driving it can cause more deposits on the backs of the intake valves which can then absorb some fuel like a sponge and make you AF off a little just enough to cause some mild occurrences. Was never bad enough to feel or hear but I guess enough for the sensor to trip.

I'm pretty good w/ maintenance on her. I usually clean out the intakes once a year and I have ARC catch can as well. I will try the injector cleaner out. My driving is pretty mild and it does occur a lot on a steep incline. Thanks for the info.

mag_black · 02-06-2019, 12:52 PM

Quote:

Originally Posted by Elmo370z

https://uprev.com/documentation/Knoc...n%20Device.pdf

With this you can listen and see if your car is truly knocking. Forum member here has installed it and it working fine. Now a true safe way to desensitize the knock sensors.

Thanks, I will give it a shot.

Quote:

Originally Posted by ByThaBay

Pm me I’ll help you analyze it and resolve it.

Awesome, really appreciate it!

Elmo370z · 02-06-2019, 02:23 PM

Quote:

Originally Posted by mag_black

Thanks, I will give it a shot.

Awesome, really appreciate it!

Pm derraj06 he installed this on his car. He had the same issues as you and I.

Martijn_b · 05-25-2020, 01:11 PM

Just want to share that I have similar problems. I validated whether the knock was real with a knock monitor, and hear no audible knock. The problem is known with Ecutek and a new update is coming out soon which gives more possibilities to solve this problem.

maxjix · 06-22-2020, 03:52 AM

It disappeared after replacing the cam sprocket in a car with a knocking value of uprev of 10,000.
Among other examples, after replacing the cam sprocket in the g37, which comes out of up to 20,000, it fell to 10,000. I am looking for other causes.

https://www.z1motorsports.com/camsha...t-p-12786.html

Jhill · 06-23-2020, 08:05 PM

Quote:

Originally Posted by Martijn_b

Just want to share that I have similar problems. I validated whether the knock was real with a knock monitor, and hear no audible knock. The problem is known with Ecutek and a new update is coming out soon which gives more possibilities to solve this problem.

What’s this update I keep hearing about adding a bunch of stuff it seems in different post. Where are people getting this info from ecutek?

brainrain · 05-31-2021, 03:16 PM

Hello,

I have ecutek knock warning at low rpm (1000-2500 rpm). It's mainly on traffic condition (when I released the clutch pedal on 1 st gear) and on highway cruising at 60mph on 6th gear.

It's never happened when engine is cold, only when the engine is warm.

I think I hear the flywheel rattle noise when it's happened.

My current setup is Exedy cluch kit with Exedy light flywheel with oem CSC

https://www.ctd-germany.com/en/exedy-clutch-kit

Is it possible to have knock warning with light flywheel ?

Is the noise coming from the engine?

The following video is when I released the clutch pedal on 1st gear :

https://youtu.be/QMYPIHRUg0M

ByThaBay · 05-31-2021, 04:24 PM

Quote:

Originally Posted by brainrain

Hello,

I have ecutek knock warning at low rpm (1000-2500 rpm). It's mainly on traffic condition (when I released the clutch pedal on 1 st gear) and on highway cruising at 60mph on 6th gear.

It's never happened when engine is cold, only when the engine is warm.

I think I hear the flywheel rattle noise when it's happened.

My current setup is Exedy cluch kit with Exedy light flywheel with oem CSC

https://www.ctd-germany.com/en/exedy-clutch-kit

Is it possible to have knock warning with light flywheel ?

Is the noise coming from the engine?

The following video is when I released the clutch pedal on 1st gear :

https://youtu.be/QMYPIHRUg0M

I can help you troubleshoot. Send me a PM

05-25-2020, 01:11 PM	#22 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3786	Just want to share that I have similar problems. I validated whether the knock was real with a knock monitor, and hear no audible knock. The problem is known with Ecutek and a new update is coming out soon which gives more possibilities to solve this problem. SwedeZ likes this. __________________ Instagram: Boosted_Fairlady

06-22-2020, 03:52 AM	#23 (permalink)
maxjix Base Member Join Date: Oct 2013 Location: south of korea Posts: 5 Drives: g37s Rep Power: 11	It disappeared after replacing the cam sprocket in a car with a knocking value of uprev of 10,000. Among other examples, after replacing the cam sprocket in the g37, which comes out of up to 20,000, it fell to 10,000. I am looking for other causes. https://www.z1motorsports.com/camsha...t-p-12786.html Last edited by maxjix; 06-22-2020 at 03:55 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ecutek tune concern	littlejuanito	Tuning	18	09-10-2017 01:45 AM
ecutek tune results	white37014	Tuning	2	09-01-2017 11:17 AM
Just got an Ecutek tune!	OptionZero	Tuning	19	07-21-2017 06:03 PM
Can you DIY tune with EcuTek?	etx	Tuning	22	06-17-2017 09:20 AM
New ECUTEK tune (Switched from my Uprev dyno tune) by SpecialtyZ	edconline	Tuning	40	03-29-2017 06:00 PM

05-31-2021, 03:16 PM	#25 (permalink)
brainrain Base Member Join Date: May 2019 Location: Paris Posts: 77 Drives: Nissan 370z Rep Power: 5	Hello, I have ecutek knock warning at low rpm (1000-2500 rpm). It's mainly on traffic condition (when I released the clutch pedal on 1 st gear) and on highway cruising at 60mph on 6th gear. It's never happened when engine is cold, only when the engine is warm. I think I hear the flywheel rattle noise when it's happened. My current setup is Exedy cluch kit with Exedy light flywheel with oem CSC https://www.ctd-germany.com/en/exedy-clutch-kit Is it possible to have knock warning with light flywheel ? Is the noise coming from the engine? The following video is when I released the clutch pedal on 1st gear : https://youtu.be/QMYPIHRUg0M