12.8009 @ 110.33

TBSS2008 · 05-06-2010, 10:41 AM

The wheels and tires look great. Your Z is going fly at the drag strip with the extra power and now much needed traction to keep her hooked up!

Z eliminator · 05-06-2010, 09:11 PM

I just finished installing the the 15 lb braile battery tonight, Thats a weight saving of 20 lbs off the front of the car. Will post picture of battery tomorrow night.
it took about 1 1/2 hour's to install it . The car started perfectly with the braille.

Z eliminator · 05-07-2010, 10:31 PM

I posted in the 12.942 thread. Not a good time at the track tonight.

Xan · 05-07-2010, 10:39 PM

Too bad on the times, but at least it wasn't the car or the driver... under those conditions you should just call it good practice and have a beer...

Z eliminator · 09-17-2010, 08:20 AM

This Saturday the Z club is going to Toronto Motor Sports park. My best time there so far is a 12.91. at that track.
I learned a lot about too much traction with the drag radials as the car bogged on the line last Wednesday night.
Since there's a major event at the track. It will be hard to get more than 3 runs in as our test and tune runs will happen when there is a break in the days main event.
At least im going to see some gerat drag racing that day.
The track will be fully dressed that day so the lanes will be fast.
It will be different drag racing with the stands full of people. The 370 z now does great burn outs so a least it will look good coming to the line.
Z.

DarkZide · 09-17-2010, 01:00 PM

What were your 1/8th ETs and MPH for these runs?

dnasty370z · 09-17-2010, 01:39 PM

Quote:

Originally Posted by Z eliminator

Best time for my 370 z 7 AT with sport.
A few bolt ons G3, CBE, Berk cats and 4.08 gears.
the best time last time was 13.2008 with only the 4.08s gears
The other bolts ons took me to 12.8009.
Just missed going 12.7's.
Was a great day at the track.

how much more gas are you wasting with the new gears?

Z eliminator · 09-20-2010, 07:16 AM

12.86 @112.7 Was the best pass of the day.
Next time im going with the street tire's

Z

G37Sam · 09-20-2010, 07:24 AM

You managed a better trap speed though

Was the launch not very good?

Z eliminator · 09-20-2010, 09:04 AM

there was too much traction 2.014 was my average 60 ft. at 1650 rpm.

G37Sam · 09-20-2010, 09:37 AM

Oh I see

There was a guy on myG37 that snapped his CV joints after installing a S/C from a few launches at the dragstrip, you plan on doing any sort of modification to your axles after your SC install?

rednek01 · 09-20-2010, 12:35 PM

G37Sam · 09-20-2010, 03:36 PM

LOL what's with the facepalm

Nitemare06 · 09-21-2010, 08:31 AM

Quote:

Originally Posted by G37Sam

LOL what's with the facepalm

Probably the "too much traction" comment. Manuals are supposed to have a little spin leaving the line, autos are supposed to dead hook. Need a higher stall (or torque

) if you think its bogging down too much. Sticky tires= higher launch RPM.

m4a1mustang · 09-21-2010, 08:34 AM

Agreed. But he doesn't have his high stall converter yet. And no one really knows how much the rear end is going to be able to take!

05-06-2010, 10:41 AM	#136 (permalink)
TBSS2008 Base Member Join Date: Apr 2009 Location: Texas Posts: 195 Drives: 11 Corvette GS 6spd Rep Power: 16	The wheels and tires look great. Your Z is going fly at the drag strip with the extra power and now much needed traction to keep her hooked up! __________________ 2011 Black Corvette Grand Sport 6spd \| NNP Daul Mode Exhaust 2008 Trail Blazer SS Black \| SuperChips Tune 2009 370Z Black 7AT Touring Sport (TRADED)

05-06-2010, 09:11 PM	#137 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 18	I just finished installing the the 15 lb braile battery tonight, Thats a weight saving of 20 lbs off the front of the car. Will post picture of battery tomorrow night. it took about 1 1/2 hour's to install it . The car started perfectly with the braille. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015. Last edited by Z eliminator; 05-07-2010 at 07:15 AM.

05-07-2010, 10:31 PM	#138 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 18	I posted in the 12.942 thread. Not a good time at the track tonight. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

05-07-2010, 10:39 PM	#139 (permalink)
Xan A True Z Fanatic Join Date: Jan 2010 Location: MA Posts:99999999999999 Posts: 3,301 Drives: 370Z 40th Aniversary Rep Power: 24	Too bad on the times, but at least it wasn't the car or the driver... under those conditions you should just call it good practice and have a beer... __________________

09-17-2010, 08:20 AM	#140 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 18	This Saturday the Z club is going to Toronto Motor Sports park. My best time there so far is a 12.91. at that track. I learned a lot about too much traction with the drag radials as the car bogged on the line last Wednesday night. Since there's a major event at the track. It will be hard to get more than 3 runs in as our test and tune runs will happen when there is a break in the days main event. At least im going to see some gerat drag racing that day. The track will be fully dressed that day so the lanes will be fast. It will be different drag racing with the stands full of people. The 370 z now does great burn outs so a least it will look good coming to the line. Z. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015. Last edited by Z eliminator; 09-17-2010 at 08:23 AM.

09-17-2010, 01:00 PM	#141 (permalink)
DarkZide Enthusiast Member Join Date: May 2010 Location: TN Posts: 291 Drives: 2010 370z BC M6 Rep Power: 14	What were your 1/8th ETs and MPH for these runs?

09-20-2010, 07:16 AM	#143 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 18	12.86 @112.7 Was the best pass of the day. Next time im going with the street tire's Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

09-20-2010, 07:24 AM	#144 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	You managed a better trap speed though Was the launch not very good? __________________ '14 Viper GTS '08 RB'd G37S - Sold

09-20-2010, 09:04 AM	#145 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 18	there was too much traction 2.014 was my average 60 ft. at 1650 rpm. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

09-20-2010, 09:37 AM	#146 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	Oh I see There was a guy on myG37 that snapped his CV joints after installing a S/C from a few launches at the dragstrip, you plan on doing any sort of modification to your axles after your SC install? __________________ '14 Viper GTS '08 RB'd G37S - Sold

09-20-2010, 12:35 PM	#147 (permalink)
rednek01 Enthusiast Member Join Date: Feb 2009 Location: Houston Posts: 352 Drives: Mustang GT Rep Power: 237	__________________ Project オレンジ 2009 (FUGLY) Grabber Orange Mustang GT // SLP loudmouth axle back // JLT intake // BamaChips Tunes // ... TheDreamer's personal mechanic

09-20-2010, 03:36 PM	#148 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	LOL what's with the facepalm __________________ '14 Viper GTS '08 RB'd G37S - Sold

09-21-2010, 08:34 AM	#150 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Agreed. But he doesn't have his high stall converter yet. And no one really knows how much the rear end is going to be able to take! __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!