12.8009 @ 110.33

Z eliminator · 09-25-2009, 12:28 PM

There was traction problems. I had to lanch at 1000 rpm and floor it or else it would spin the tires. It also spun them in 2nd gear.
765 ft. DA.
If you go back in the post i listed all the temps
air aound 62 to 63
water 185
oil 70 C (156)
Track 100
The hoter the moter gets the slower you go. The 2nd pass was a 12.9.
I reset the air preasure to 29 psig every run.
At the end of the day it ran 13.35 to 13.5 with an oil temp of 110 c.
It spun so hard in 2nd that i had to shift into 3 right away.
The first pass was the best.
I would love to launch at 2500 rpm. If it hooked it would be really quick.
I tried one at 2000 and it just spun the tires.

09-25-2009, 12:28 PM	#10 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,660 Drives: 370 Z 7AT Sports Rep Power: 21	There was traction problems. I had to lanch at 1000 rpm and floor it or else it would spin the tires. It also spun them in 2nd gear. 765 ft. DA. If you go back in the post i listed all the temps air aound 62 to 63 water 185 oil 70 C (156) Track 100 The hoter the moter gets the slower you go. The 2nd pass was a 12.9. I reset the air preasure to 29 psig every run. At the end of the day it ran 13.35 to 13.5 with an oil temp of 110 c. It spun so hard in 2nd that i had to shift into 3 right away. The first pass was the best. I would love to launch at 2500 rpm. If it hooked it would be really quick. I tried one at 2000 and it just spun the tires. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.